• Journal of Korean Neurosurgical Society
• /
• v.56 no.1
• /
• pp.42-47
• /
• 2014

Objective : Helicopter ambulance transport (HAT) is a highly resource-intensive facility that is a well-established part of the trauma transport system in many developed countries. Here, we review the benefit of HAT for neurosurgical patients in Korea. Methods : This retrospective study followed neurotrauma patients who were transferred by HAT to a single emergency trauma center over a period of 2 years. The clinical benefits of HAT were measured according to the necessity of emergency surgical intervention and the differences in the time taken to transport patients by ground ambulance transport (GAT) and HAT. Results : Ninety-nine patients were transferred to a single university hospital using HAT, of whom 32 were taken to the neurosurgery department. Of these 32 patients, 10 (31.3%) needed neurosurgical intervention, 14 (43.8%) needed non-neurosurgical intervention, 3 (9.4%) required both, and 11 (34.4%) did not require any intervention. The transfer time was faster using HAT than the estimated time needed for GAT, although for a relatively close distance (<50 km) without ground obstacles (mountain or sea) HAT did not improve transfer time. The cost comparison showed that HAT was more expensive than GAT (3,292,000 vs. 84,000 KRW, p<0.001). Conclusion : In this Korean-based study, we found that HAT has a clinical benefit for neurotrauma cases involving a transfer from a distant site or an isolated area. A more precise triage for using HAT should be considered to prevent overuse of this expensive transport method.

• The Korean Journal of Pain
• /
• v.10 no.2
• /
• pp.214-219
• /
• 1997

Background: Epidural neural blockade with local anesthetics combined with steroids has been in clinical trials for patients with low back pain. But pain treatment of low back pain remains somewhat problematic. Many patients with low back pain have epidural fibrosis and adhesions proved with magnetic resonance imaging(MRI) examination. These findings might play an important role in the origin of back pain. Present study was aims to investigate the effect of epidural adhesiolysis in patients with low back pain. Methods: We investigated 76 patients suspected with epidural fibrosis and adhesion was suspected. Nerve pathology was demonstrated and epidural fibrosis suspected or proved with MRI examination. 17G needle specially designed by Racz was inserted at sacral hiatus and catheter was inserted untill its tip was located at lesion site under fluoroscopic guidance. Injection of contrast dye was achieved and prospected spread of agents. Injection of 0.25% bupivacaine, triamcinolone, and 10% hypertonic saline via catheter were carried out daily for 3 days. Evaluation included assessment of pain relief (Numerical Rating Scale; NRS) post-epidural adhesiolysis 3 days, 1 week, and 3 months. We also looked for complication of epidural adhesiolysis. Results: Statistical analysis(Friedman nonparametric repeated measures test and Dune's multiple comparison test) demonstrated NRS was significantly less during 3 months after epidural adhesiolysis(P<0.05). Especially, there is a extremely significance in post-epidural adhesiolysis 3 days (P<0.001). Only four patients reported any complications the most common symptom among three persistent headache but disappeared after a few months without residual sequelae. Conclusion: We conclude epidural adhesiolysis is a safe and effective method of pain therapy for low back pain with proven lumbo-sacral fibrosis and adhesion. A direct visualization by epiduroscopy may be more useful to the resulting functional changes after epidural adhesiolysis.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.2
• /
• pp.255-263
• /
• 2010

In order to prepare the interchange between and the unification of North and South Korea, it is needed to establish the development direction of irrigation reservoirs and formulate technological and political directions for preparing effectively against the demand of agricultural countermeasure information like the analysis of rural comprehensive development projects and the present state of agricultural land of North Korea. The purpose of this research is to construct the database of agricultural productive infrastructures and analyze the present state of irrigation reservoirs of the Yeseong River Basin in North Korea using SPOT-5 satellite imagery. As a result of the research, we were able to not only design classification items but establish method and precedure for producing thematic maps related agricultural productive infrastructure without on-site survey by analyzing present condition related to agricultural water of the basin. And we intend to provide basic data for analyzing suitabile locations of irrigation reservoirs in the basin by performing basin extraction, volume evaluation of the existing reservoirs, scale cultivative lands, benefit area fo the reservoirs, and the existing agricultural water system. In addition, we were able to understand the problem and limit in constructing the database related agricultural productive facilities.

• Journal of the Korean Geosynthetics Society
• /
• v.13 no.2
• /
• pp.11-20
• /
• 2014

To create a large-scale complex, it is often the case to perform ground improvement by using vertical drain method after the reclamation of coastal soft ground, for construction period shortening and stable site renovation. During this process, the pore water migrates to the horizontal drainage layer of the ground surface through the vertical drain installed in the soft ground and discharged out to the open. In the past sand was used as the material for the horizontal drainage layer in numerous cases, however recently, due to material shortage and high pricing, the use of crushed stones has increased. To prevent mixing of the materials between the horizontal drainage layer and the upper landfill, geosynthetics (PPMat) are installed. However, the use of geosynthetics results in high additional cost for material purchase and installation, therefore it is necessary to examine the validity of the installation itself. In this study, to verify the necessity, model tests were performed. Results from the model tests indicate that the drainage ability of the horizontal drainage layer is barely affected by the application of geosynthetics.

• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.10
• /
• pp.349-360
• /
• 2015

In recent year, phishing attacks are flooding with services based on the web technology. Phishing is affecting online security significantly day by day with the vulnerability of web pages. To prevent phishing attacks, a lot of anti-phishing techniques has been made with their own advantages and dis-advantages respectively, but the phishing attack has not been eradicated completely yet. In this paper, we have studied phishing in detail and categorize a process of phishing attack in two parts - Landing-phase, Attack-phase. In addition, we propose an phishing detection methodology based on web sites heuristic. To extract web sites features, we focus on URL and source codes of web sites. To evaluate performance of the suggested method, set up an experiment and analyze its results. Our methodology indicates the detection accuracy of 98.9% with random forest algorithm. The evaluation of proof-of-concept reveals that web site features can be used for phishing detection.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.3
• /
• pp.1-14
• /
• 2014

It is necessary to decide the pumping rate and pumping well location together with the capture zone in order to determine an appropriate groundwater remediation strategy to manage the contaminated groundwater. The relationship between the capture zone and the drawdown radius of influence ($ROI_s$) was considered. $ROI_{cs}$ is defined as the distance where the criteria of drawdown is cs meter from pumping well in this paper. A method to decide the required pumping rate for the remediation of contaminated groundwater in order to create appropriate $ROI_{cs}$ is suggested by using the Theis equation (1935) and Cooper-Jacob equation (1946). It was shown in this study that $ROI_{cs}$ is in proportion to the pumping rate and the criteria of drawdown, which decides $ROI_{cs}$, is inversely proportional to Ti value (transmissivity ${\times}$ hydraulic gradient). The pumping rate which creates the required $ROI_{cs}$ could be planned through the relationship between the $ROI_{cs}$ and pumping rates ($ROI_{cs}$-Q curve) of the field sites 1, 2 and 3. If the drawdown is investigated along with Ti value and pumping rate at a specific site where pump and treat remediation is planned, it is expected that the required criteria of drawdown can be evaluated by using the relationship between the cs and Ti (cs-Ti curve).

• Journal of Korean Society on Water Environment
• /
• v.34 no.4
• /
• pp.382-390
• /
• 2018

In this study, the LIDMOD3 was developed to design and evaluate low impact development (LIDMOD). In the same fashion, the LIDMOD3 employs a curve number (NRCS-CN) method to estimate the surface runoff, infiltration and event mean concentration as applicable to pollutant loads which are based on a daily time step. In these terms, the LIDMOD3 can consider a hydrologic soil group for each land use type LID-BMP, and the applied removal efficiency of the surface runoff and pollutant loads by virtue of the stored capacity, which was calculated by analyzing the recorded water balance. As a result of Model development, the LIDMOD3 is based on an Excel spread sheet and consists of 8 sheets of information data, including: General information, Annual precipitation, Land use, Drainage area, LID-BMPs, Cals-cap, Parameters, and the Results. In addition, the LIDMOD3 can estimate the annual hydrology and annual pollutant loads including surface runoff and infiltration, the LID efficiency of the estimated surface runoff for a design rainfall event, and an analysis of the peak flow and time to peak using a unit hydrolograph for pre-development, post-development without LID, and as calculated with LID. As a result of the model application as applied to an apartment, the LIDMOD3 can estimate LID-BMPs considering a well spatical distributed hydroloic soil group as realized on land use and with the LID-BMPs. Essentially, the LIDMOD3 is a screen level and simple model which is easy to use because it is an Excel based model, as are most parameters in the database. This system can be expected to be widely used at the LID site to collect data within various programmable model parameters for the processing of a detail LID model simulation.

• Journal of Electrochemical Science and Technology
• /
• v.12 no.1
• /
• pp.137-145
• /
• 2021

Among the non-precious metal catalysts, iron-nitrogen doped carbon (Fe-N/C) catalysts have been recognized as the most promising candidates for an alternative to Pt-based catalysts for the oxygen reduction reaction (ORR) under alkaline and acidic conditions. In this study, the nano replication method using mesoporous silica, which features tunable primary particle sizes and shape, is employed to prepare the mesoporous Fe-N/C catalysts with different shapes. Platelet SBA-15, irregular KIT-6, and spherical silica particle (SSP) were selected as a template to generate three different kinds of shapes of the mesoporous Fe-N/C catalyst. Physicochemical properties of mesoporous Fe-N/C catalysts are characterized by using small-angle X-ray diffraction, nitrogen adsorption-desorption isotherms, and scanning electron microscopy images. According to the electrochemical evaluation, there is no morphological preference of mesoporous Fe-N/C catalysts toward the ORR activity with half-cell configuration under alkaline electrolyte. By implementing X-ray photoelectron spectroscopy analysis of Fe and N atoms in the mesoporous Fe-N/C catalysts, it is possible to verify that the activity towards ORR highly depends on the portions of "Fe-N" species in the catalysts regardless of the shape of catalysts. It was suggested that active site distribution in the Fe-N/C is one important factor towards ORR activity.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.5
• /
• pp.89-100
• /
• 2007

In this study, various field and laboratory tests were performed to investigate the characteristics of shear strength and bearing behavior to be considered in the estimation of stability and trafficability in early stage of stabilization process in marine clay dredged deposit. Site characterization was carried out to grasp the basic properties of the deposit. Field vane test, unconfined compression test and direct shear test were conducted to evaluate the shear strength distribution for varied depths, and the characteristics of shear strength and stress-strain behavior of the crust layer. Plate load tests were also performed to estimate the bearing capacity and to assess load-settlement behavior and failure pattern of the deposit. The bearing capacity was also estimated using previously proposed methods for double-layered clay deposit. The estimated bearing capacity was compared with the results of the plate load tests and then, the applicability of the estimation method was discussed.

• Genomics & Informatics
• /
• v.21 no.1
• /
• pp.7.1-7.11
• /
• 2023

The gram-positive bacterium Listeria monocytogenes is an important foodborne intracellular pathogen that is widespread in the environment. The functions of hypothetical proteins (HP) from various pathogenic bacteria have been successfully annotated using a variety of bioinformatics strategies. In this study, a HP Imo0888 (NP_464414.1) from the Listeria monocytogenes EGD-e strain was annotated using several bioinformatics tools. Various techniques, including CELLO, PSORTb, and SOSUIGramN, identified the candidate protein as cytoplasmic. Domain and motif analysis revealed that the target protein is a PemK/MazF-like toxin protein of the type II toxin-antitoxin system (TAS) which was consistent with BLASTp analysis. Through secondary structure analysis, we found the random coil to be the most frequent. The Alpha Fold 2 Protein Structure Prediction Database was used to determine the three-dimensional (3D) structure of the HP using the template structure of a type II TAS PemK/MazF family toxin protein (DB ID_AFDB: A0A4B9HQB9) with 99.1% sequence identity. Various quality evaluation tools, such as PROCHECK, ERRAT, Verify 3D, and QMEAN were used to validate the 3D structure. Following the YASARA energy minimization method, the target protein's 3D structure became more stable. The active site of the developed 3D structure was determined by the CASTp server. Most pathogens that harbor TAS create a crucial risk to human health. Our aim to annotate the HP Imo088 found in Listeria could offer a chance to understand bacterial pathogenicity and identify a number of potential targets for drug development.