• Journal of Digital Contents Society
• /
• v.15 no.1
• /
• pp.129-136
• /
• 2014

Wi-Fi fingerprinting system is a very popular positioning method used in indoor spaces. The system depends on Wi-Fi Received Signal Strength (RSS) from Access Points (APs). However, the Wi-Fi RSS is changeable by multipath fading effect and interference due to walls, obstacles and people. Therefore, the Wi-Fi fingerprinting system produces low position accuracy. Also, Wi-Fi signals pass through walls. For this reason, the existing system cannot distinguish users' floor. To solve these problems, this paper proposes a LED fingerprinting system for accurate indoor positioning. The proposed system uses a received optical power from LEDs and LED-Identification (LED-ID) instead of the Wi-Fi RSS. In training phase, we record LED fingerprints in database at each place. In serving phase, we adopt a K-Nearest Neighbor (K-NN) algorithm for comparing existing data and new received data of users. We show that our technique performs in terms of CDF by computer simulation results. From simulation results, the proposed system shows that a positioning accuracy is improved by 8.6 % on average.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.109-113
• /
• 2011

In intelligent subway systems, UWB-based WiMedia D-MAC Protocol can be considered to send and receive multimedia data which requires high data rate. However, network devices which do not exist within 10 meters, the limited communication rage, can not communicate with each other because WiMedia does not support multi-hop communications. In this paper, we developed the algorithm to select a relaying device for multi-hop routing on WiMedia networks. In the first step, each device acquires information of neighbors through beacon and decides whether it is a normal or relaying device using the acquired information. In the next step, all devices can create the 2-hop routing table using the information received via relaying devices and the whole routing table for all devices on networks, eventually.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.1
• /
• pp.35-42
• /
• 2012

This paper is about the implementation of low cost WiMAX remote radio head system with Ethernet instead of optical link. We deployed a simplified frame structure on the data frames transmitted between a basestation and remote radio heads in order to maximize Ethernet link utilization which shows relatively lower maximum throughput compared to that of optical links. In addition, a synchronization mechanism was applied on a basestation and remote radio heads placed on remote sites in order for simultaneous data transmission and reception in all remote radio heads which are essential for proper communication with terminals. These schemes are implemented with FPGA. The results of experiment with a WiMAX Femtocell show that our remote radio head systems efficiently deliver radio frames with proper timing.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.7-10
• /
• 2012

In this thesis, Wi-Fi Direct which can communicate with other device without AP, we study how to be selected GO considering multi-user connection and we apply it to application. We give the weight how many time a device was GO and how many time the device connected with other devices in 24 hours. With this value, the device is selected to GO when other devices request the connection. We show that the application which we implemented select right GO.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.507-510
• /
• 2011

As the amount of the wireless mobile products like a 'Smart phone' used increases, the studies about the Location Based Service (LBS) is highly increasing. Outdoor location determination can use the GPS which is built-in in the wireless mobile products. However, it is not possible to use GPS inside the huge cruise bigger than a normal building, it is regarded to consider Indoor location determination which is appropriate at the inside environment. Wi-Fi (Wireless Fidelity) does not need an extra installation process because it is already installed here and there inside the building. In this respect, Wi-Fi has low price competitiveness compared to other wireless sensor products. In this paper, I will introduce 'Bayesian Algorithm' which can recognize useful space with Wi-Fi signal.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.3
• /
• pp.1-8
• /
• 2015

The most used smart set-top box in home driven by the Android OS and based on Wi-Fi technology has to ensure nothing wrong with the Wi-Fi service regardless of the various user's installation environment. The direction test method about the nondirectional of the Wi-Fi doesn't be determined as the standard and each manufacturers devise the their own test methods and conduct the tests. In this paper, we created the 720 test cases considering 2 components of upload & download, the 10 elements of the vertical angle and the 36 elements of the horizontal angle looking at the wireless router in order to verify omni-directional Wi-Fi capability. In reality, from viewpoint in terms of cost and time constraint, it is difficult to test all the test cases. Therefore, we decided to reduce test cases by applying Pair-wise testing technique which is one of combinational testing techniques based on ISO / IEC 29119-4. And we obtained the test cases in which the Pair-wise technique was applied by Allpairs tool which output test cases automatically and conducted the test. It could be confirmed that the proposed technique shortened 48.61% of the time to be spent in progressing the existing test cases and that the trace about the part in which the problem was generated with the result of the simplified test case was possible enough.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.5
• /
• pp.446-452
• /
• 2005

As the name means, the WiBro is mobile service so that radio internet connection may be possible with high transmission speed using various terminal. Because WiBro is choosing suitable All-lP network architecture in internet service offer, structure of network is simple and the various supplementary service offer is available. This paper presented mobility model of terminal and proposed efficient way to improve existent way that transfer efficiency drops by data padding and analyze the performance by simulation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.5
• /
• pp.1735-1754
• /
• 2022

The reliability and performance of WiFi need optimization because of the rising number of WiFi users day by day. A highlighted point is saving power while transmitting and receiving packets using WiFi devices. Wake-on-Wlan (WoW) is also implemented to improve energy consumption, but it also needs betterment. This paper will introduce universal ideas to transmit and receive packets using low-power technology like Bluetooth or BLE (Bluetooth low energy). While looking for power-saving ways in this research, WiFi connection and maintenance also take care using lesser power-consuming technology. Identifying different use-cases where low power technology can help save energy and maintain 802.11 connection is part of the research. In addition, the proposed method discuss energy saving with unicast and broadcast/multicast data. Calculation of power-saving and comparison with standalone WiFi usage clearly shows the effectiveness of the proposed method.

• Journal of Software Assessment and Valuation
• /
• v.15 no.1
• /
• pp.37-42
• /
• 2019

Many similarity analysis methods, one of the dispute resolution methods for computer programs, have been studied. This paper is about quantitative similarity analysis of MIB (Management Information Base) file. Quantitative similarity means that the source codes of two computers are analyzed and the results are compared with a certain standard. The source code to analyze is a program that provides network device management functions such as configuration management, fault management, and performance management using SNMP protocol for WiMAX CPE devices. Here, WiMAX refers to the IEEE 802.16 wireless network standard protocol and can be classified into fixed WiMAX and mobile WiMAX. WiMAX CPE is a wireless Internet terminal that is fixedly used in a customer's home or office. In this paper, we analyze the similarity between MIB file of company A and company B. We will analyze whether the MIB file leaked from the damaged company is not just a list to describe the product specifications, but whether the property value can be recognized.

• Progress in Medical Physics
• /
• v.21 no.4
• /
• pp.348-353
• /
• 2010

The purpose of this study was to explore the potentials of a clinical 3T MRI in mouse brains and technical adaptation and optimization. T1-weighted images (T1WI), T2-weighted images (T2WI), FLAIR (Fluid Attenuated Inversion Recovery) images, Gadolinium enhanced T1-weighted images (Gd-T1WI), Diffusion weighted images (DWI) were acquired in brain of 2 mice (weight 20~25 g) with cerebral infarction by occlusion of right middle cerebral artery, 1 hour, 24 hours, 72 hours after infarction and 1 normal mouse brain using clinical 3T MRI scanner. We analyzed differentiation of striatum, ventricle, cerebral cortex, and possibility of detection of acute cerebral infarction. We could differentiate the striatum, ventricle, cerebral cortex on T2WI and on DWI, FLAIR, T1WI, the differentiation of each anatomy of brain was not definite, but acute cerebral infarction was detected on DWI of 1 hour, 24 hours, 72 hours after infarction and on T2WI, FLAIR of 24 hours, 72 hours after infarction. Clinical 3T MRI can be used in differentiation of anatomy of mouse brains and DWI can be helpul in detection of acute cerebral infarction in acute phase. With technical adaptation and optimization clinical 3T MRI can be useful tool for provide preclinical and clinical small animal studies.