• KIPS Transactions on Software and Data Engineering
• /
• v.11 no.1
• /
• pp.51-58
• /
• 2022

Drivable area detection, one of the main functions of advanced driver assistance systems, means detecting an area where a vehicle can safely drive. The drivable area detection is closely related to the safety of the driver and it requires high accuracy with real-time operation. To satisfy these conditions, V-disparity-based method is widely used to detect a drivable area by calculating the road disparity value in each row of an image. However, the V-disparity-based method can falsely detect a non-road area as a road when the disparity value is not accurate or the disparity value of the object is equal to the disparity value of the road. In a road environment including vegetation, such as a highway and a country road, the vegetation area may be falsely detected as the drivable area because the disparity characteristics of the vegetation are similar to those of the road. Therefore, this paper proposes a drivable area detection method and hardware architecture with a high accuracy in road environments including vegetation areas by reducing the number of false detections caused by V-disparity characteristic. When 289 images provided by KITTI road dataset are used to evaluate the road detection performance of the proposed method, it shows an accuracy of 90.12% and a recall of 97.96%. In addition, when the proposed hardware architecture is implemented on the FPGA platform, it uses 8925 slice registers and 7066 slice LUTs.

• Journal of Internet Computing and Services
• /
• v.21 no.4
• /
• pp.109-116
• /
• 2020

With the advent of high-speed railways, railways are one of the most frequently used means of transportation at home and abroad. In addition, in terms of environment, carbon dioxide emissions are lower and energy efficiency is higher than other transportation. As the interest in railways increases, the issue related to railway safety is one of the important concerns. Among them, visual abnormalities occur when various obstacles such as animals and people suddenly appear in front of the railroad. To prevent these accidents, detecting rail tracks is one of the areas that must basically be detected. Images can be collected through cameras installed on railways, and the method of detecting railway rails has a traditional method and a method using deep learning algorithm. The traditional method is difficult to detect accurately due to the various noise around the rail, and using the deep learning algorithm, it can detect accurately, and it combines the two algorithms to detect the exact rail. The proposed algorithm determines the accuracy of railway rail detection based on the data collected.

• Journal of Korean Society of Transportation
• /
• v.24 no.3 s.89
• /
• pp.103-112
• /
• 2006

For recent innovation of If technology and the beginning of Digital Multimedia Broadcasting (DMB) service, it has been dramatically increased to setup TV system in a car for watching TV and receiving traffic Information. Watching TV while driving would distract a driver s cognitive and visual attention as eating food, operating the radio, using a cell phone. However, there is paucity of empirical researches and it is uncertain how watching TV in driving impacts on the driver's cognition in the concrete. Therefore, we surveyed domestic drivers on the attitude watching TV while driving as well as conducted experiments through a driving simulator. Especially, we recruited two groups of participants to explore the effects of watching TV on driving behavior. The result proved that the participants who watched TV while their driving had relatively narrower the attention span than the Participants who did not watch TV. Also, those who watched TV drove with less stability and more urgent operations of the brake and accelerator than those who did not watched TV Finally, we discussed limitations and implications of the study.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.11
• /
• pp.537-542
• /
• 2017

Aggressive driving is a major cause of car accidents. Previous studies have mainly analyzed young driver's aggressive driving tendency, yet they were only done through pure clustering or classification technique of machine learning. However, since elderly people have different driving habits due to their fragile physical conditions, it is necessary to develop a new method such as enhancing the characteristics of driving data to properly analyze aggressive driving of elderly drivers. In this study, acceleration data collected from a smartphone of a driving vehicle is analyzed by a newly proposed ECA(Enhanced Clustering method for Acceleration data) technique, coupled with a conventional clustering technique (K-means Clustering, Expectation-maximization algorithm). ECA selects high-intensity data among the data of the cluster group detected through K-means and EM in all of the subjects' data and models the characteristic data through the scaled value. Using this method, the aggressive driving data of all youth and elderly experiment participants were collected, unlike the pure clustering method. We further found that the K-means clustering has higher detection efficiency than EM method. Also, the results of K-means clustering demonstrate that a young driver has a driving strength 1.29 times higher than that of an elderly driver. In conclusion, the proposed method of our research is able to detect aggressive driving maneuvers from data of the elderly having low operating intensity. The proposed method is able to construct a customized safe driving system for the elderly driver. In the future, it will be possible to detect abnormal driving conditions and to use the collected data for early warning to drivers.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.4 s.316
• /
• pp.42-47
• /
• 2007

To reduce the chattering errors of reed switch sensors in the automatic remote measurement of water meter a reed switch sensor was analyzed and improved. The operation of reed switch sensors can be described as a mechanical contact switch by approximation of permanent magnet piece to generate an electrical pulse. The reed switch sensors are used mostly in measurement application to detect the rotational or translational displacement. To apply for water flow measurement devices, the reed switch sensors should keep high reliability. They are applied for the electronic digital type of water flow meters. The reed switch sensor is just mounted simply on the conventional mechanical type flow meter. A small magnet is attached on a pointer of the water meter counter rotor. Inside the reed sensor two steel leaf springs make mechanical contact and apart repeatedly as rotation of flow meter counter. The counting electrical contact pulses can be converted as the water flow amount. The MCU sends the digital flow rate data to the server using the wireless communication network. But the digital data is occurred difference or won by chattering noise. The reed switch sensor contains chattering error by it self at the force equivalent position. The vibrations such as passing vehicle near to the switch sensor installed location causes chattering. In order to reduce chattering error, most system uses just software methods, for example using filter algorithm and also statistical calibration methods. The chattering errors were reduced by changing leaf spring structure using mechanical characteristics.

• Korea Science and Art Forum
• /
• v.21
• /
• pp.31-43
• /
• 2015

Information and Communications Technology (ICT) is one of the technologies which represent the core value of the creative economy. It has served as a vehicle connecting the existing industry and corporate infrastructure, developing existing products and services and creating new products and services. In addition to the ICT, new devices including big data, mobile gadgets and wearable products are gaining a great attention sending an expectation for a new market-pioneering. Further, Internet of Things (IoT) is helping solidify the ICT-based social development connecting human-to-human, human-to-things and things-to-things. This means that the manufacturing-based hardware development needs to be achieved simultaneously with software development through convergence. The essential element the convergence between hardware and software is OS, for which world's leading companies such as Google and Apple have launched an intense development recognizing the importance of software. Against this backdrop, the status-quo of the software market has been examined for the study of the present report (Korea Evaluation Institute of Industrial Technology: Professional Design Technology Development Project). As a result, the software platform-based Google's android and Apple's iOS are dominant in the global market and late comers are trying to enter the market through various pathways by releasing web-based OS and similar OS to provide a new paradigm to the market. The present study is aimed at finding the way to utilize a smart content by which anyone can be a developer based on OS responding to such as social change, newly defining a smart content to be universally utilized and analyzing the market to deal with a rapid market change. The study method, scope and details are as follows: Literature investigation, Analysis on the app market according to a smart classification system, Trend analysis on the current content market, Identification of five common trends through comparison among the universal definition of smart content, the status-quo of application represented in the app market and content market situation. In conclusion, the smart content market is independent but is expected to develop in the form of a single organic body being connected each other. Therefore, the further classification system and development focus should be made in a way to see the area from multiple perspectives including a social point of view in terms of the existing technology, culture, business and consumers.

• The Korean Journal of Air & Space Law and Policy
• /
• v.9
• /
• pp.85-143
• /
• 1997

The main purpose of the investigation of an accident caused by aircraft is to be prevented the sudden and casual accidents caused by wilful misconduct and fault from pilots, air traffic controllers, hijack, trouble of engine and machinery of aircraft, turbulence during the bad weather, collision between birds and aircraft, near miss flight by aircrafts etc. It is not the purpose of this activity to apportion blame or liability for offender of aircraft accidents. Accidents to aircraft, especially those involving the general public and their property, are a matter of great concern to the aviation community. The system of international regulation exists to improve safety and minimize, as far as possible, the risk of accidents but when they do occur there is a web of systems and procedures to investigate and respond to them. I would like to trace the general line of regulation from an international source in the Chicago Convention of 1944. Article 26 of the Convention lays down the basic principle for the investigation of the aircraft accident. Where there has been an accident to an aircraft of a contracting state which occurs in the territory of another contracting state and which involves death or serious injury or indicates serious technical defect in the aircraft or air navigation facilities, the state in which the accident occurs must institute an inquiry into the circumstances of the accident. That inquiry will be in accordance, in so far as its law permits, with the procedure which may be recommended from time to time by the International Civil Aviation Organization ICAO). There are very general provisions but they state two essential principles: first, in certain circumstances there must be an investigation, and second, who is to be responsible for undertaking that investigation. The latter is an important point to establish otherwise there could be at least two states claiming jurisdiction on the inquiry. The Chicago Convention also provides that the state where the aircraft is registered is to be given the opportunity to appoint observers to be present at the inquiry and the state holding the inquiry must communicate the report and findings in the matter to that other state. It is worth noting that the Chicago Convention (Article 25) also makes provision for assisting aircraft in distress. Each contracting state undertakes to provide such measures of assistance to aircraft in distress in its territory as it may find practicable and to permit (subject to control by its own authorities) the owner of the aircraft or authorities of the state in which the aircraft is registered, to provide such measures of assistance as may be necessitated by circumstances. Significantly, the undertaking can only be given by contracting state but the duty to provide assistance is not limited to aircraft registered in another contracting state, but presumably any aircraft in distress in the territory of the contracting state. Finally, the Convention envisages further regulations (normally to be produced under the auspices of ICAO). In this case the Convention provides that each contracting state, when undertaking a search for missing aircraft, will collaborate in co-ordinated measures which may be recommended from time to time pursuant to the Convention. Since 1944 further international regulations relating to safety and investigation of accidents have been made, both pursuant to Chicago Convention and, in particular, through the vehicle of the ICAO which has, for example, set up an accident and reporting system. By requiring the reporting of certain accidents and incidents it is building up an information service for the benefit of member states. However, Chicago Convention provides that each contracting state undertakes collaborate in securing the highest practicable degree of uniformity in regulations, standards, procedures and organization in relation to aircraft, personnel, airways and auxiliary services in all matters in which such uniformity will facilitate and improve air navigation. To this end, ICAO is to adopt and amend from time to time, as may be necessary, international standards and recommended practices and procedures dealing with, among other things, aircraft in distress and investigation of accidents. Standards and Recommended Practices for Aircraft Accident Injuries were first adopted by the ICAO Council on 11 April 1951 pursuant to Article 37 of the Chicago Convention on International Civil Aviation and were designated as Annex 13 to the Convention. The Standards Recommended Practices were based on Recommendations of the Accident Investigation Division at its first Session in February 1946 which were further developed at the Second Session of the Division in February 1947. The 2nd Edition (1966), 3rd Edition, (1973), 4th Edition (1976), 5th Edition (1979), 6th Edition (1981), 7th Edition (1988), 8th Edition (1992) of the Annex 13 (Aircraft Accident and Incident Investigation) of the Chicago Convention was amended eight times by the ICAO Council since 1966. Annex 13 sets out in detail the international standards and recommended practices to be adopted by contracting states in dealing with a serious accident to an aircraft of a contracting state occurring in the territory of another contracting state, known as the state of occurrence. It provides, principally, that the state in which the aircraft is registered is to be given the opportunity to appoint an accredited representative to be present at the inquiry conducted by the state in which the serious aircraft accident occurs. Article 26 of the Chicago Convention does not indicate what the accredited representative is to do but Annex 13 amplifies his rights and duties. In particular, the accredited representative participates in the inquiry by visiting the scene of the accident, examining the wreckage, questioning witnesses, having full access to all relevant evidence, receiving copies of all pertinent documents and making submissions in respect of the various elements of the inquiry. The main shortcomings of the present system for aircraft accident investigation are that some contracting sates are not applying Annex 13 within its express terms, although they are contracting states. Further, and much more important in practice, there are many countries which apply the letter of Annex 13 in such a way as to sterilise its spirit. This appears to be due to a number of causes often found in combination. Firstly, the requirements of the local law and of the local procedures are interpreted and applied so as preclude a more efficient investigation under Annex 13 in favour of a legalistic and sterile interpretation of its terms. Sometimes this results from a distrust of the motives of persons and bodies wishing to participate or from commercial or related to matters of liability and bodies. These may be political, commercial or related to matters of liability and insurance. Secondly, there is said to be a conscious desire to conduct the investigation in some contracting states in such a way as to absolve from any possibility of blame the authorities or nationals, whether manufacturers, operators or air traffic controllers, of the country in which the inquiry is held. The EEC has also had an input into accidents and investigations. In particular, a directive was issued in December 1980 encouraging the uniformity of standards within the EEC by means of joint co-operation of accident investigation. The sharing of and assisting with technical facilities and information was considered an important means of achieving these goals. It has since been proposed that a European accident investigation committee should be set up by the EEC (Council Directive 80/1266 of 1 December 1980). After I would like to introduce the summary of the legislation examples and system for aircraft accidents investigation of the United States, the United Kingdom, Canada, Germany, The Netherlands, Sweden, Swiss, New Zealand and Japan, and I am going to mention the present system, regulations and aviation act for the aircraft accident investigation in Korea. Furthermore I would like to point out the shortcomings of the present system and regulations and aviation act for the aircraft accident investigation and then I will suggest my personal opinion on the new and dramatic innovation on the system for aircraft accident investigation in Korea. I propose that it is necessary and desirable for us to make a new legislation or to revise the existing aviation act in order to establish the standing and independent Committee of Aircraft Accident Investigation under the Korean Government.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.9
• /
• pp.717-722
• /
• 2001

This paper presents a methodology on the backward path tracking control of a trailer type robot which consists of two parts: a tractor and a trailer. It is difficult to control the motion of a trailer vehicle since its dynamics is non-holonomic. Therefore, in this paper, the modeling and parameter estimation of the system using a real-coded genetic algorithm(RCGA) is proposed and a backward path tracking control algorithm is then obtained based on the linearized model. Experimental results verify the effectiveness of the proposed method.

• The Korean Journal of Air & Space Law and Policy
• /
• v.29 no.2
• /
• pp.205-237
• /
• 2014

Last 50 years there were a lot of space subjects launched by space activities of many states and these activities also had created tremendous, significant space debris contaminating the environment of outer space. The large number of space debris which are surrounding the earth have the serious possibilities of destroying a satellite or causing huge threat to the space vehicles. For example, Chinese anti-satellite missile test was conducted by China on January 11, 2007. As a consequence a Chinese weather satellite was destroyed by a kinetic kill vehicle traveling with a speed of 8 km/s in the opposite direction. Anti-satellite missile tests like this,contribute to the formation of enormous orbital space debris which can remain in orbit for many years and could interfere with future space activity (Kessler Syndrome). The test is the largest recorded creation of space debris in history with at least 2,317 pieces of trackable size (golf ball size and larger) and an estimated 150,000 debris particles and more. Several nations responded negatively to the test and highlighted the serious consequences of engaging in the militarization of space. The timing and occasion aroused the suspicion of its demonstration of anti-satellite (ASAT) capabilities following the Chinese test of an ASAT system in 2007 destroying a satellite but creating significant space debris. Therefore this breakup seemed to serve as a momentum of the UN Space Debris Mitigation Guidelines and the background of the EU initiatives for the International Code of Conduct for Outer Space Activities. The UN Space Debris Mitigation Guidelines thus adopted contain many technical elements that all the States involved in the outer space activities are expected to observe to produce least space debris from the moment of design of their launchers and satellites until the end of satellite life. Although the norms are on the voluntary basis which is normal in the current international space law environment where any attempt to formulate binding international rules has to face opposition and sometimes unnecessary screening from many corners of numerous countries. Nevertheless, because of common concerns of space-faring countries, the Guidelines could be adopted smoothly and are believed faithfully followed by most countries. It is a rare success story of international cooperation in the area of outer space. The EU has proposed an International Code of Conduct for Outer Space Activities as a transparency and confidence-building measure. It is designed to enhance the safety, security and sustainability of activities in outer space. The purpose of the Code to reduce the space debris, to allow exchange of the information on the space activities, and to protect the space objects through safety and security. Of the space issues, the space debris reduction and the space traffic management require some urgent attention. But the current legal instruments of the outer space do not have any binding rules to be applied thereto despite the incresing activities on the outer space. We need to start somewhere sometime soon before it's too late with the chaotic situation. In this article, with a view point of this problem, focused on the the Chinese test of an ASAT system in 2007 destroying a satellite but creating significant space debris and tried to analyse the issues of space debris reduction.

• Journal of Service Research and Studies
• /
• v.12 no.1
• /
• pp.25-35
• /
• 2022

Covid-19, of which the first patient in Korea occurred in January 2020, has affected various fields. Of these, the tourism sector might havebeen hit the hardest. In particular, since tourism-based industrial structure forms the basis of the region, Gangwon-province, and the tourism industry is the main source of income for small businesses and small enterprises, the damage is great. To check the situation and extent of such damage, targeting the Chuncheon region, where public access is the most convenient among the Gangwon regions, one-day tours are possible using public transportation from Seoul and the metropolitan area, with a general image that low expense tourism is recognized as possible, this study conducted empirical analysis through data analysis. For this, the general status of the region was checked based on the visitor data of Chuncheon city provided by the tourist information system, and to check the levels ofinterest in 2019, before Covid-19, and in 2020, after Covid-19, by comparing keywords collected from the web service sometrend of Vibe Company Inc., a company specializing in keyword collection, with SK Telecom's T-map search site data, which in parallel provides in-vehicle navigation service and communication service, this study analyzed the general regional image of Chuncheon-city. In addition, by comparing data from two years by developing a tourism popularity index applying keywords and T-map search site data, this study examined how much the Covid-19 situation affected the level of interest of visitors to the Chuncheon area leading to actual visits using a data analysis approach. According to the results of big data analysis applying the tourism popularity index after designing the data mart, this study confirmed that the effect of the Covid-19 situation on tourism popularity in Chuncheon-city, Gangwon-provincewas not significant, and confirmed the image of tourist destinations based on the regional characteristics of the region. It is hoped that the results of this research and analysis can be used as useful reference data for tourism economic policy making.