• 한국결정성장학회지
• /
• 제10권2호
• /
• pp.96-99
• /
• 2000

우리는 hot-well epiraxy 방법으로 성장된 ZnSe 박막의 광발광 측정을 10 K에서 실행하였다. as-grown 박막은 upper polartion과 lower polarition으로 분리된 중성 도너(donor) bound exciton $I_2$($D^{\circ}$,X)가 아주 우세하게 관측되었고 Se분위기 열처리 결과 $I_2$기원이 Se-vacancy에 관련이 있음을 알았다. 또 중성 억셉터(acceptor) bound exciton $I_1$$^d$발광이 관측되었다. 그런데 ZnSe는 self-compensated에 의해 p-type 반전이 어렵다. 우리는 Se 분위기 열처리로부터 $I_1$$^d$ 봉우리가 아주 우세함을 보였다. 이것은 열처리한 ZnSe 박막에 억셉터가 풍부하게 존재한다는 것을 의미하며 결과적으로 광학적인 p-type 반전을 분명하게 관측 할 수 있었다. 또한 엑셉터 불순물의 결합 에너지는 268meV이였다. 장파장대에서 SA 발광은 Se 분위기 열처리 후 사라진 것으로 보아 Se-vacancy와 관련이 있는 것으로 고찰되었다.

• 한국전기전자재료학회논문지
• /
• 제30권3호
• /
• pp.139-143
• /
• 2017

N-type crystalline silicon solar cells have high metal impurity tolerance and higher minority carrier lifetime that increases conversion efficiency. However, junction quality between the boron diffused layer and the n-type substrate is more important for increased efficiency. In this paper, the current status and prospects for boron diffused layers in N-type crystalline silicon solar cell applications are described. Boron diffused layer formation methods (thermal diffusion and co-diffusion using $a-SiO_X:B$), boron rich layer (BRL) and boron silicate glass (BSG) reactions, and analysis of the effects to improve junction characteristics are discussed. In-situ oxidation is performed to remove the boron rich layer. The oxidation process after diffusion shows a lower B-O peak than before the Oxidation process was changed into $SiO_2$ phase by FTIR and BRL. The $a-SiO_X:B$ layer is deposited by PECVD using $SiH_4$, $B_2H_6$, $H_2$, $CO_2$ gases in N-type wafer and annealed by thermal tube furnace for performing the P+ layer. MCLT (minority carrier lifetime) is improved by increasing $SiH_4$ and $B_2H_6$. When $a-SiO_X:B$ is removed, the Si-O peak decreases and the B-H peak declines a little, but MCLT is improved by hydrogen passivated inactive boron atoms. In this paper, we focused on the boron emitter for N-type crystalline solar cells.

• 분석과학
• /
• 제33권1호
• /
• pp.1-10
• /
• 2020

Alpha lipoic acid, an antioxidant, is widely used for treatment of various diseases. It is a racemic mixture, with R-(+)-α lipoic acid exhibiting greater potency, bioavailability, and effectiveness than those of the S-form. Thus, selective R-(+)-α lipoic acid has been recently used in various applications, necessitating the development of a method to test the enantiomeric impurity in R-(+)-α lipoic acid. We developed a simple and fast high-performance liquid chromatography method using a new immobilized amylose-based chiral column (Chiralpak IA-3). Design of experiment was applied to accurately predict the effects and interactions among various factors affecting the analytical parameters and to optimize the chromatographic conditions. This optimized method could completely separate the two enantiomer peaks with a resolution > 1.8 within a short running time (9 min). Then, the optimized method was validated according to the guidelines of the International Conference on Harmonization and applied for quantification of S-(-)-α lipoic acid in some commercial R-(+)-α lipoic acid tromethamine raw material. Our results suggested that the developed method could be used for routine quality control of R-(+)-α lipoic acid products.

• 보존과학회지
• /
• 제23권
• /
• pp.39-51
• /
• 2008

죽지는 최근 몇 십 년 간의 양지(洋紙)의 보급과 더불어 중국의 죽지 산지(産地)에는 생산성 만을 추구해 약품 사용이 극히 보편적인 현상이 되었다. 이러한 영향 때문에 지류 문화재의 보수지(補修紙) 문제가 심각한 문제로 제기되고 있다. 죽지를 염색하거나 색료를 도포하는 과정에 있어 생성되는 심한 얼룩이나 반점은 지류 문화재의 재현 연구에 큰 장애가 되고 있음은 주지의 사실이기도 하다. 이 번 죽지 제작에 있어서 종이의 질감이나 색을 크게 좌우하는 것으로는 석회발효 일광표백이었으나 잔류물 유 무도 많은 영향을 끼치고 있는 것으로 판명 되었다. 이것은 원료를 채집해 발효시킨 후 씻기의 공정에서 세심한 배려가 없으면 최종적으로 지면(紙面)의 느낌에 크게 영향을 미치는 것으로 확인되었다. 여기서 잔류물의 예로 들 수 있는 것은 석회이다. 석회는 다른 불순물과 다르게 미량이라도 잔류하게 되면 종이 염색에 잔류물에 의한 반점이나 얼룩을 만드는 원인이 되며 그 기능을 잃게 된다. 백죽지의 재현은 회화, 전적, 문서 등의 재현연구에 사용되는 용지나, 별종의 지직화(紙織畵) 재현에 유효할 것으로 생각된다. 그러나 중국원료의 초기 단계 처리에 대해 개선의 여지가 있으며 앞으로 좀 더 깊이 있는 연구가 필요하다고 할 수 있다.

• Current Photovoltaic Research
• /
• 제4권2호
• /
• pp.54-58
• /
• 2016

Laser-doped selective emitter process requires dopant source deposition, spin-on-glass, and is able to form selective emitter through SiNx layer by laser irradiation on desired locations. However, after laser doping process, the remaining dopant layer needs to be washed out. Laser-induced melting of pre-deposited impurity doping is a precise selective doping method minimizing addition of process steps. In this study, we introduce a novel scheme for fabricating highly efficient selective emitter solar cell by laser doping. During this process, laser induced damage induces front contact destabilization due to the hindrance of silver nucleation even though laser doping has a potential of commercialization with simple process concept. When the laser induced damage is effectively removed using solution etch back process, the disadvantage of laser doping was effectively removed. The devices fabricated using laser doping scheme power conversion efficiency was significantly improved about 1% abs. after removal the laser damages.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.357-361
• /
• 2001

The possibility of producing Cr$_2$O$_3$powder from waste magnesia-chromium refractory was investigated by sulfuric acid reaction, alkali fusion, water leaching & purification and heat treatment. The effects of temperature, the amount of NaOH added and the flow rate of air on chromium extraction efficiency in an alkali fusion step were investigated. The fusion product was leached with methanol to solve free-NaOH, and then leached with water to produce a Na$_2$CrO$_4$solution. The purity of chrome(Ⅵ) oxides, prepared both from monochromate with an impurity content and monochromate purified with $CO_2$were also examined. The purified monochromate solution was reduced from Cr(Ⅵ) to Cr(III) with NaHSO$_3$solution. The reduced solution was neutralized with NaOH to produce Cr(OH)$_3$. Water washing was treated to eliminate Na$_2$SO$_4$from neutralized Cr(OH)$_3$slurry. The washed Cr(OH)$_3$was dried and thermally treated to produce Cr$_2$O$_3$powder. The properties like lightness and hue of Cr$_2$O$_3$fabricated in this study were L=47.47, a=-14.40 and b=17.21.

• 한국세라믹학회지
• /
• 제13권1호
• /
• pp.25-29
• /
• 1976

The properties vary with quality of ferric-oxide that is major material of ferrites. In this point of view, a manufacturing method of pure and homogeneous fine ferric oxide is very important. The characters of this study are as follows: 1) Ferric oxide was made from waste pickling liquor of steel. 2) The crude ferric-oxide that is made by roasting the pickling liquor was dissolved in 20% HCI solution and then produced ferric chloride is purified by ethyl ether extraction. 3) The methanol solution of purified ferric chloride was sprayed into the refractory tube with compressed air and propane gas and then ignited leading to the ferric-oxide powder. 4) The produced oxide powder was introduced to the scrubber type vessel throught cooling system in order to collect the powder. 5) Crystalline phase of the powder was identified by X-ray diffraction and particle size, crystalline shape of the powder were investigated by settling method and electron microscope and the effects of concentration of ferric chloride in methanol on grain size were discussed. Results were obtained as fellows: 1) Total impurity in the ferric oxide produced from waste pickling liquor was 3.7%. 2) The solubilityof crude ferric oxide that was made from waste pickling liquor in HCI solution increased with the HCI concentration and reached to saturation range at 15% HCI concentration. 3) Extraction of FeCl3 increased with HCI concentration which is solvent. 4) Alpha ferric oxide obtained was very fine crystalline particles, the mean crystalline grain increased with the concentration of ferric chloride, and mean grain size distributed from 3.5$\mu$(at 0.5mole/l) to 0.5$\mu$(at 0.05mole/l).

• 대한전자공학회논문지
• /
• 제21권1호
• /
• pp.62-70
• /
• 1984

비저항이 10Ω-cm, 두께가 13∼15mi1인 <111> oriented, p형 Si기판을 이용하여 N+PP+ BSF 전지와 에미터 영역이 N+N 고저 접합으로 이루어진 N+NPP+ HELEBSF(high low emitter bach surface field) 전지를 설계 제작하였다. 접합형 태양전지의 에미터 영역에서 고저 접합구조가 효율 개선에 미치는 영향을 검토하기 위해 HLEBSF 전지의 N영역을 제외하고는 같은 마스크와 동시 공정을 통해 N+PP-전지와 N+NPP+ 전지의 가영역에서 물리적 파라미터들(불순물 농도, 두께)을 동일하게 만들었다. 100mW/㎠의 인공조명에서 측정한 결과 N+PP+ 전지들의 전면적 (유효 수광면적) 평균 변환효율이 10.94%(12.16%)이었고, N+NPP+ 전지들의 평균 변환효율은 12.07% (13.41%)로 나타났다. N+NPP+ 전지의 효율개선은 N+N-고저 접합 에미터 구조가 N+ 에미터 영역에서 나타나는 heavy doping effects를 제거함으로써 에미터 재결합 전류의 증가를 억제하고 나아가 개방전압(Voc)과 단락전류(Ish)의 값을 증가시켜 준 결과로 볼 수 있다.

• Korean Chemical Engineering Research
• /
• 제51권6호
• /
• pp.661-665
• /
• 2013

ITO glass 제조공정에서 발생되는 인듐스크랩으로부터 인듐옥살산염의 제조에서 유기산의 영향을 연구하였다. 유기산의 종류, 농도 그리고 반응액의 pH, 온도, 시간 등을 변화시키면서 인듐옥살산염 제조에 미치는 영향을 조사하였다. 불순물 제거 효율은 구연산 및 옥살산 모두 비슷하였으나 구연산은 인듐과 유기산염을 형성하지 못하였다. 인듐옥살산염 제조의 최적 조건은 옥살산 농도 1.5M, pH 7, 반응온도 $80^{\circ}C$, 반응시간 6시간이었다. 한편, pH가 증가하면 회수율은 증가하지만, 순도는 감소하였다. 2회 반복으로 제조된 인듐옥살산염의 순도는 99.995% (4N5)를 나타내었다. 인듐옥살산염은 치환반응, 소성 등에 의해 인듐금속 및 인듐산화물 등으로 전환할 수 있다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권4호
• /
• pp.221-225
• /
• 1999

This paper shows the parameters to affect the critical characteristic of YBaCuO superconducting bulk fabricated by MPMG (Melt Powdered Melt Growth)process. In order to investigate proper processing variables, the effect of the holding time at the melting temperature and that of the slow cooling time in $O_2\; ambient\; on\; the\; J_c$ were experimented. And then with the above obtained heat treatment conditions, the effects of addition of $Y_2BaCuO_5\; and\; Ag\; on\; the\; J_c$ were also investigated. A proper slow cooling time yields phase transformation from Tetragonal $(YBa_2Cu_3O_6)$ to Orthorhombic $(YBa_2Cu_3O_7)$ during an annealing time in $O_2$. Ag addition plays a role in increasing the $T_c\; and\; the J_c$, but the magnetization decreases. The $J_c$ and the magnetization increase with addition of Y211. $J_c$ of the sample added Ag 10wt% is superiorover 3000 G. Proper holding time, slow cooling time and amount of impurity addition are important parameters in fabricating the YBaCuO bulk by MPMG process with high $J_c$.