• Journal of the Korean Wood Science and Technology
• /
• v.39 no.5
• /
• pp.444-450
• /
• 2011

The goal of this study is to investigate bending properties of domestic timber. Three representative structural timber from Larix kaempferi, Pinus koraiensis, and Pinus densiflora, in the northeastern South Korea were selected. Visual grading for the timber was conducted based on KFRI notification 2009-01 and the bending strength for the timber was evaluated based on ASTM D 198 bending. The high percentage of grade 1 and 2 for Larix kaempferi shows that the KFRI notification was optimized for this species. The bending strength distributions from Pinus koraiensis and Pinus densiflora were very similar. It could be possible to specify the allowable bending properties of these two Specification using a united species group similar to spruce-pine-fir. Lastly, the bending strength of $120{\times}180mm$ structural members was higher than both existing values in KBC 2009 and design values for timber of imported species described in the NDS. Thus, 120 mm thick domestic softwoods could replace the commercial imported species and the KBC should be modified to provide design values for both timber and dimensional lumber, respectively, like NDS.

• Journal of the Korea Furniture Society
• /
• v.24 no.1
• /
• pp.51-59
• /
• 2013

In this study, a dwelling type of Korea and Japan was compared, and consumption rate of domestic timber and its usage was also investigated. In Korea, dwelling type of apartment which constructed by iron and steel-concrete is main shared, but a detached house which is shared at 60% of dwelling type of Japan is mainly constructed by timber. And the rate of the consumption of domestic wood in Japan is 73%. In Japan, there is an effort to substitute imported wood to domestic timber through the promotion of using of domestic timber. Whereas the needs on using of domestic timber gradually emerged. So, the legal about sustainable use of wood is approved by the National Assembly on May 2012. There is not active movement in the aspect of using of domestic timber yet. These causes to the geographical and environmental characteristics, but industry, policy, and the difference of recognize on domestic timber utilization is thought to do greater influence. Hence, it is recommended to make a portfolio of both balanced domestic timber usage and the change of awareness of people by referring to the example of Japan.

• Journal of architectural history
• /
• v.1 no.1 s.1
• /
• pp.117-128
• /
• 1992

The purpose of this paper is to clarify the introduction of foreigner's architectural engineering such as building materials techniques engineers, focused on the Late Yi-dynasty. Such all kind of building materials as timber brick tile cement lime glass window furniture and so on was imported from the foreign company in opening period of ports in Cho-son. The timer of these materials was imported from Japan, the brick tile from China, and others directly from Western counteries indirectly from Japan China. As it was active in an inflow of building materials and machines about 1890's, the modern building techniques were introduced and elementarily mastered such as timber sewing, manufacturing baking of brick glass, and masonry, The above modern techniques became the direct background in the formation of Korean modern architecture. Building engineers can be divided into three classes : architect engineer apprentice. But It could be apparently not divided the relation between architect and engineer at that time. They could be classified into job-architects who were engaged by the Korean government and leaded an active life in their settlement, and missonaries, They introduced the construction and style of modern architecture in our country, And so many skilled laborers and laborers participated in the construction of their settlement.

• Journal of the Korea Furniture Society
• /
• v.23 no.4
• /
• pp.460-466
• /
• 2012

This study was conducted to investigate the surface hardness of thermally-compressed larch wood by compression set and temperature. The surface hardness of thermally-compressed larch wood increased with increasing compression set and temperature. For compression set 60%, the specific gravity was increased as 0.93. However, the surface hardness was lower value as 31.1 N/$mm^2$ compared with a similar specific gravity of the tropical timber. For density profile, less than compression set 40%, compression was observed mainly surface area. On the other hand, more than 50%, density profile variation was reduced by compression of central part. Results of this study indicate that thermally-compressed larch wood can be replace some imported hardwoods such as oak or cherry. However, thermally-compressed larch wood was difficult to replace the tropical timber being imported in terms of surface hardness.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.3
• /
• pp.41-48
• /
• 1985

In near future about 500,000 hectares of Japanese larch and pitch pine need thinning to improve crop-tree spacing and reasonable species composition in Korea. Although thinned trees show very little high quality wood, in fact, all the sawed products are suitable for construction and farming materials. Studies on the utilization of thinned small-diameter trees have been implemented in order to increase lumber yield and display the skeleton of farm buildings. The results obtained in this study were summarized as follows: 1. According to Korean Conifers Log Grading System, log grade 3 was 87.4 percent in Japanese larch bolts and 95.8 percent in pitch pine bolts from thinned trees. The ability to identify defects was essential for grading logs. 2. Cutting diagrams of sawing were developed for 1-sided sawing, 2-sided sawing and 3-sided sawing by small end diameter class of bolt and cutting sizes also were found to use effectively lumber with wane. 3. Lumber recovery of Pitch pine was a little higher than that of Japanese larch. The maximum lumber yields of pitch pine by sawing patterns were 87.2 percent for 1-sided sawing, 80.8 percent for 2-sided sawing an 64.1 percent for 3-sided sawing, up yield compared with 58.1 percent for 4-sided sawing. The lumber yield of 1, 2 and 3-sided sawing significantly was higher value than that of 4-sided sawing. 4. Lumber was inspected and graded. Lumber quality of diameter class 12cm was a little better than that of diameter class 8cm, but 90 percent of lumber in diameter c1ass 16cm fell into grade 3. The lumber grade was classified by Korean standard grades of confiers lumber. 5. Lumber from 1, 2 and 3-sided sawing was used to build the skeleton of a farm house ($53m^2$) and greenhouse ($60m^2$) in order to display more efficient use of small diameter trees from thinning 6. Total volume of timber for building a farm house was $8.1m^3$ of imported timber. Timber of $7m^3$, 70 percent of total volume would be substituted imported timber for domestic timber.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.136-149
• /
• 2020

It is generally believed that Douglas Fir timber imported from North America is used in repair work for Korean wooden heritage sites due to an insufficient supply of extra-large sized Korean pine timber. Based on this understanding in the cultural heritage repair field, Cultural Heritage Repair Business Entities ("CHRBE") prefer North American Douglas Fir timber which is more easily acquired on the market than large Korean pine timber. However, if CHRBE use large quantities of foreign-origin wood in the heritage repair field, this presents the threat of negative domestic impacts on cultural heritage such as breaching the preservation principal and ultimately weakening material authenticity. Therefore, this study aims to investigate the current supply status of large Korean pine timber through examination of existing research, interviews with experts engaged in CHRBE, and timber mills. With this information, the authors seek to identify whether the market supply of large Korean pine timber is indeed insufficient or not. In addition to this, this paper identifies the reasons why large Korean pine timber is not widely used if such timber supply is actually sufficient. In order to propose suggestions regarding the issues above, the authors study the distribution channel for large Korean pine timber and the price spectrum of this timber through examination of price information from the public agencies under the Korea Forest Service, research papers from the Cultural Heritage Administration, and estimation documents from timber mills. This paper also identifies two main opinions about why Korean timber has not been commonly used in the Korean heritage repair field. The first opinion is that the supply of large Korean pine timber really is insufficient in Korea. However, the second opinion is that it is hardly used due to inappropriateness of the government's procurement and estimation system, despite the fact that the supply of the timbers on the market is actually sufficient. Through the aforementioned research, this paper comes to the conclusion that the second opinion has strong grounds in many aspects. In terms of suggestions, alternative routes are proposed to stimulate the use of large Korean pine timber via supply by the 'Korea Foundation for Traditional Architecture and Technology' and surveys of the price spectrum of the timber, etc.

• Journal of the Korean Wood Science and Technology
• /
• v.14 no.2
• /
• pp.43-49
• /
• 1986

In the light of real situation of Korean timber resources, it is no wonder that Korean economy depends on a lot of imported timber, however, we only need to draw attention how have they kept the balance of payment in the field of forest products trade for the last few decades, until the second oil crisis in 1979. Afterwards, the gap between imports and exports of forest products in terms of value has been widened so far, on account of various reasons inside and outside. However, according to national economic policy to drive more active exportation, new policy and strategy to expend world market of forest products urgently expectable in order to shorten the gap between imports and exports of forest products in the future. On the other hand, the current timber importation policy should be reconsidered, not only to support optimum domestic timber price level so as to compensate timber producers' cost but also to make suitable economic environment to induce new investments in the field of private forestry sector.

• Journal of Korean Society of Forest Science
• /
• v.90 no.3
• /
• pp.373-379
• /
• 2001

The objectives of this study were to assess implementation on tariff quotas and tariff cuts committed in the WTO as result of Uruguay Round(UR) negotiations and to examine impacts of reductions in agricultural protection agreed in the UR on major non-timber forest products markets. The implementation of WTO Agreement on Agriculture was analysed based on the relevant data and statistics. The impacts of implementation on tariff cuts and tariff quotas on non-timber forest products markets were estimated by using supply and demand elasticities from previous studies and data on production, consumption and trade after UR. The quantities of Chestnut, Pine nut and Jujube imported by the system of tariff quota did not exceed the committed quotas over the five years from 1995 to 1999. The current level of applied rates on imports of non-timber products is much lower than that of bound rates, which will be maintained until the year 2004. It is estimated that increase in imports after UR reduced prices and that reduction in prices led to decrease in expenditure and to increase in consumer surplus. It is estimated, however, that production level significantly decreased due to rise in imports and that the negative effects on production exceeded positive effects on consumption. Exports of most non-timber forest products decreased after UR even though non-timber forest products could gain access to the export markets at the lower tariffs as a result of UR.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.4
• /
• pp.126-137
• /
• 2014

Characteristics of heating and drying of Canadian-imported Douglas-fir timber using microwave in order to secure convenience and quality of drying timber and to get basic data for secondary conservation treatment are as follows: As the results of analysis of change curves of internal temperature of the timber after irradiating it, round timber and board timber showed stable heat distribution, heat consumption and surface water-content in heating with 30kW for 30 minutes and 120 minutes and with 40kW for 3 minutes and 9 minutes, respectively. Especially, surface water-content distribution according to heating by microwave showed very even leveling and water-content decrease rate was also more 30% compared to its weight showing excellent dry efficiency. And in case of soaking timbers into liquid chemicals for secondary conservation according to the analysis results of heat consumption, it is expected that large amount of preservative will be permeated. Therefore, timber heated by microwave is remarkably available for using industrial materials and developing secondary utilized products with its fast water-content decrease and dryness and higher heat consumption.

• Journal of the Korea Furniture Society
• /
• v.21 no.2
• /
• pp.188-195
• /
• 2010

This study has been focused on the evaluation of domestic softwood timbers to replace imported timbers for woodcrafts and furniture-making. Figures on radial and tangential sections were observed with naked eyes. As the result of study on the figures appeared on the wood surface of 6 species of trees, flat grain and edge grain were clearly found from Taxus cuspidata. Juniperus chinensis and Ginkgo biloba had wavy grain figure and pigment figure, and blister figure was found in Pinus densiflora, Larix kaempferi showed pitch streak and irregular figures on its tangential section due to growth abnormalities. Wavy grain figure appeared weakly on near knot of Pinus koraiensis. The characteristic figures shown from each species of trees are expected to be used for crafts, sculptures, furniture, and interior decoration. They are also considered to have great potential to substitute imported timber sufficiently, which are currently used a lot for wood crafts and furniture-making.