• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.9
• /
• pp.563-565
• /
• 2014

Beam forming techniques are used to increase the efficiency of using frequency. In this paper we design and implement Butler matrix to be used for ISM band. The implemented Butler matrix has the insertion loss of maximum 6.7dB and the maximum phase shift error of $-6.51^{\circ}{\sim}7.17^{\circ}$ over 2.4~2.485GHz.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1200-1202
• /
• 2001

A programmable dymanometer is prosed where the user can define the steady-state and inertial torque-speed characteristic of the load. Rotating machinert can be tested on this dynamometer to determine their transient and steady-state characteristics with a pratical load. The system uses proportional-integrtal(PI)controllers to control a three-phase induction motor using indirect field orientation.

• Proceedings of the KIEE Conference
• /
• 2006.05a
• /
• pp.66-70
• /
• 2006

Frequency is an important operating parameter of a power system. Electric power systems sustain transient frequency swings whenever the balance between generation and load does not no longer hold. To cope with this Constraints, il requires an accurate and high speedy frequency deviation estimation technique and suitable adjustment to obtain the power system energy balance. This paper describes the design, computational aspects and implementation of an iterative technique for measuring power system. The rate change of the phase angle is used for estimation. To confirm the validity of the proposed algorithm, the simulation studies carried out on a typical 154[KV] double T/L system by using EMTP software. Some test results are presented in the paper.

• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.85-86
• /
• 2014

The paper presents a power supply of atmospheric-pressure plasma reactor based on SiC (Silicon Carbide) MOSFET resonant inverter. Thanks to the capacitive characteristic of capacitive coupling plasma reactor type, the LC series resonant inverter had been applied to take advantages of this topology with the implementation of SiC MOSFET power modules as switching power devices. Designation of gate driver for SiC MOSFET had been introduced by this paper. The 5kVp, 5kW power supply had also been verified by experimental results.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.7
• /
• pp.253-260
• /
• 1996

In this paper, a simple scheme of two-stage free-space photonic swiching system for nonblocking optical interconnections has been investigated using holgorams. The multistage system requires a smaller number of interconnections for a given number of inpuut-output nonblocking ports than the single stage system does. Here hologram elements were used to change interconnection beam paths. In order to increase the idffraction efficiency of the hologram elements in photographic plates, a bleaching technique was used, which converts the amplitude hologram to the phase hologram. To show sthe feasibility of our optical interconnection system, it was implemented using the bleached hologram arrays and an LCTV spatial light modulator, and the sytem as a photonic switching system was demonstrated.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.1
• /
• pp.10-17
• /
• 2012

This paper presents a clock regenerator using two $2^{nd}$ order ${\sum}-{\Delta}$ (sigma-delta) modulators for wide range of dividing ratio as defined in HDMI standard. The proposed circuit adopts a fractional-N frequency synthesis architecture for PLL-based clock regeneration. By converting the integer and decimal part of the N and CTS values in HDMI format and processing separately at two different ${\sum}-{\Delta}$ modulators, the proposed circuit covers a very wide range of the dividing ratio as HDMI standard. The circuit is fabricated using 0.18 ${\mu}m$ CMOS and shows 13 mW power consumption with an on-chip loop filter implementation.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.293-297
• /
• 2009

In this thesis, design of a VCO(Voltage controlled Oscillator) with a novel tuning mechanism is presented for the Radar system. This circuit, the 9.5 GHz oscillator is designed and implemented by restructuring microstrip resonator to raise Q value and to require a wide frequency tuning range. This product is fabricated on 2.6 Teflon substrate and device is NE722S01. In this paper, The new microstrip resonator VCO is proposed to achieve the characteristic of a wide frequency tuning range. This microstrip resonator VCO shows the phase noise characteristic of -108.3 dBc/Hz at 1 MHz offset from the fundamental frequency, the output power of 5.7 dBm and the second harmonic suppression of -38 dBc for the VCO are obtained. The manufacture VCO shows a frequency tuning range of 193.8 MHz. The proposed micro trip resonator VCO can be used for X-band Radar System with required tuning range.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.226-230
• /
• 2000

In this paper, we implemented the QPSK demodulator with a CPLD chip, and examined the results. DD(Decision Directed)-Gardner algorithm is used for STR loop and Decision-Directed algorithm is used for CPR loop. The speed of the QPSK demodulator implemented in FLEX10K chip can be guaranteed approximately 2[Mbpsl] transmission speed. In practical designed by ASIC, the speed is faster than that of CPLD by 5-6 times.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.2B
• /
• pp.151-159
• /
• 2002

Frequency synthesizer is an essential part for developing high speed frequency hopping radio. A high speed synthesizer using DDS driven PLL technique is designed and implemented for a X-band portable satellite terminal. It generates transmitter and receiver frequency ranging 6600∼7100MHz and 6140∼6640MHz, respectively by using 102.4MHz local oscillator, Its lock time is below 15 $\mu$sec and Its phase noise is below -754dBc at 1KHz offset Sequency.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.55 no.2
• /
• pp.59-61
• /
• 2006

In our country most of transmission lines are double-circuit lines. In these lines, the combining method of increasing conductor height and installation of passive shield-loop to mitigate magnetic field near a transmission line, is a good and feasible method. The basic principle of passive shield loop is that the field from the current induced in the shield loop conductors counteracts the field from the phase conductors. This method applied to domestic transmission lines to meet the magnetic field level, 100, 30, 10 and 4 mG, respectively. In each magnetic field level, the minimum conductor height and passive loop height are presented for the implementation of the practical design.