• 제목/요약/키워드: Impedance Matching Enhancement

검색결과 17건 처리시간 0.025초

대역폭 향상을 위한 소형 MCR 구조를 갖는 Ultra-Wide Band 안테나 설계 (Design of Ultra-Wide Band Antenna with Compact MCR Structure for BW Enhancement)

  • 이람 나담;김영진
    • 한국통신학회논문지
    • /
    • 제42권4호
    • /
    • pp.798-805
    • /
    • 2017
  • 본 논문은 슬롯이 삽입된 접지, 수정된 급전선 및 서로 다른 반지름을 갖는 원형 링 구조의 패치 안테나를 제시한다. 안테나의 크기는 $15{\times}12mm^2$이며, 전체 면적 $180mm^2$ 및 전기적 치수 $0.14{\lambda}{\times}0.12{\lambda}$(초단 주파수)를 갖는다. 제안된 안테나는 3.1 GHz ~ 12.3 GHz 대역을 포함하며, 대역폭 비 4.13:1, 비 대역폭 122%, 반사계수 최대 -38dB의 결과를 보인다. 소형화된 크기를 증명하기 위해 대역폭 크기 비율이 계산되었다. 공급 라인에 삽입 된 얇은 슬롯은 전체 주파수 대역에서 우수한 임피던스 정합을 제공한다. 제안된 안테나의 시뮬레이션은 반사 계수 ${\leq}-10dB$, VSWR 2:1, 방사 패턴 및 군지연 (ns)을 시뮬레이션 결과로 제시하였다. 제안된 안테나는 우수한 임피던스 정합 및 매우 작은 크기의 장점을 보이며, 대역폭 향상 및 UWB 단거리 고속 무선통신을 제공한다.

이중층 패치와 부분 제거된 접지면을 이용한 광대역 평판형 역 F 안테나의 설계 (Design of Wideband Planar Inverted-F Antenna Using Two-Layer Patches and Modified Ground Structure)

  • 이광재;이용희;강연덕;이택경
    • 한국전자파학회논문지
    • /
    • 제18권9호
    • /
    • pp.1015-1022
    • /
    • 2007
  • 본 논문에서는 이중층의 패치와 제거된 접지면을 이용하여 광대역 평판형 역 F 안테나(PIFA)를 설계하였다. 제안된 안테나는 급전부를 공유하게 한 이중 층 패치의 슬릿을 통해 공진점을 조절하였고 접지면을 부분 제거하여 임피던스 정합을 개선하였다. 대역폭은 VSWR 2 이하 기준 1,492 MHz(BW: 67.7 %, 1,457${\sim}$2,949 MHz)와 VSWR 2.5 이 하 기준 1,170 MHz(BW: 21 %, 4,970${\sim}$6,140 MHz)를 얻었다. 이는 DCS 1800, DCS1900, UMTS (W-CDMA), WiBro, WLAN(IEEE 802.11b), Satellite DMB, WLAN (IEEE802.11a) 총 7개의 무선 통신 서비스를 만족한다. 방사 패턴은 전 방향에서 신호의 송수신이 가능하였고 대역 내에서 주파수별 서로 유사한 형태를 가졌다.

Efficiency Enhancement of Wireless Power Transfer with Optimum Coupling Mechanism for Mid-range Operation

  • Anowar, Tanbir Ibne;Kumar, Narendra;Ramiah, Harikrishnan;Reza, Ahmed Wasif
    • Journal of Electrical Engineering and Technology
    • /
    • 제12권4호
    • /
    • pp.1556-1565
    • /
    • 2017
  • This paper depicts the design, implementation and analysis of efficient resonant based wireless power transfer (WPT) technique using three magnetic coupled coils. This work is suitable for mid ranged device due to small form factor while minimizing the loading effect. A multi turned loop size resonator is exploited for both the transmitter and receiver for longer distance. In this paper, class-E power amplifier (class-E PA) is introduced with an optimum power tracking mechanism of WPT system to enhance the power capability at mid-range with a flat gain. A robust method of finding optimum distance is derived with an experimental analysis of the designed system. In this method, the load sensitive issue of WPT is resolved by tuning coupling coefficient at considerable distances. Our designed PA with a drain efficiency of 77.8% for a maximum output of 5W is used with adopted tuning technique that improves the overall WPT system performance by 3 dB at various operating points.

무전극 램프 안테나의 권선수에 따른 휘도와 파라미터 특성 (Parameter and Brightness Characteristic of Antena according to Coil turns on Electrodeless Fluorescent Lamp)

  • 양종경;최기승;백광현;최용성;이종찬;박대희
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 추계학술대회 논문집 전기물성,응용부문
    • /
    • pp.281-284
    • /
    • 2004
  • In Recent, it became necessary to envelope the technology about electrodeless fluorescent lamp according to demand of the electrodeless fluorescent lamp system that used higher efficiency and advantage of long-lifetime. Especially, in the electrodeless fluorescent lamp which used H-mode, efficiency of lamp is decided from matching parameter of antena and inverter So it is of the utmost importance to design antena and inverter. Therefore, this paper used a transformer principle for efficiency rising of electrodeless fluorescent lamp and interpreted an equivalent circuit, used an impedance analyzer in order to confirm a performance enhancement of lamp along design of antenna, and confirmed parameter characteristic of R, L, C, Z, Phase, Q-factor along a change of magnetic flux density. Also, this paper confirmed a luminance characteristic of electrodeless lamp along parameter change with measuring optical characteristic along a change of magnetic flux density.

  • PDF

무전극 램프의 효율향상을 위한 안테나의 파라미타 특성 및 휘도특성 (Parameter and Brightness Characteristic Analysis of Antena for Efficiency Improvement on Electrodeless Fluorescent Lamp)

  • 양종경;최기승;백광현;최용성;이종찬;박대희
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
    • /
    • pp.531-534
    • /
    • 2004
  • In Recent, it became necessary to develope the technology about electrodeless fluorescent lamp according to demand of the electodeless fluorescent lamp system that used higher efficiency and advantage of long-lifetime. Especially, in the electordeless fluorescent lamp which used H-mode, efficiency of lamp is decided from matching parameter of antena and inverter. So it is of the utmost importance to design antena and inverter Therefore, this paper used a transformer principle for efficiency rising of electrodeless fluorescent lamp and interpreted an equivalent circuit, used an impedance analyzer in order to confirm a performance enhancement of lamp along design of antenna, and confirmed parameter characteristic of R, L, C, Z, Q-factor along a change of magnetic flux density. Also, this paper confirmed a luminance characteristic of electordeless lamp along parameter change with measuring optical characteristic along a change of magnetic flux density

  • PDF

스마트 안경용 초소형 MIMO 안테나 설계 (Design of a Compact MIMO Antenna for Smart Glasses)

  • 최세환;최재훈
    • 한국전자파학회논문지
    • /
    • 제28권4호
    • /
    • pp.351-354
    • /
    • 2017
  • 본 논문에서는 스마트 안경용 초소형 MIMO(Multiple Input Multiple Output) 안테나를 제안하였다. 제안된 MIMO 안테나는 가깝게 놓인 두 개의 대칭 IFA(Inverted-F Antenna) 안테나 사이에 접힌 T-형태의 isolator를 삽입하고, 접지면에 추가로 한 쌍의 slots을 설계함으로써 격리도 개선 및 임피던스 매칭 특성을 얻었다. 제안된 안테나는 2.4 GHz ISM(Industrial, Scientific, and Medical) 대역에서 동작하며, $35mm{\times}9mm{\times}0.8mm$의 작은 크기를 갖는다. 제안된 안테나는 phantom을 사용하여 인체의 영향을 고려해 설계하였으며, 측정실험을 통해 18 dBm의 입력하에서 1.38 W/kg의 SAR(Specific Absorption Rate)값을 가짐을 확인하였다. 제안된 안테나의 성능은 기존의 연구결과와 비교하여 검증하였다.

지상파 디지털 방송 수신용 소형 반 보우 타이 형 준-야기 안테나 (Compact Half Bow-tie-type Quasi-Yagi Antenna for Terrestrial DTV Reception)

  • 이종익;여준호;박진택
    • 한국산학기술학회논문지
    • /
    • 제14권4호
    • /
    • pp.1908-1914
    • /
    • 2013
  • 본 논문에서는 지상파 디지털 방송 수신용 광대역 평면 야기 안테나의 설계방법에 대해 연구하였다. 다이폴을 급전하는 코플래너 스트립은 스트립에 내장된 마이크로스트립과 연결되고 종단은 단락되어 있다. 급전되는 다이폴에 근접한 영역에 폭이 넓은 직사각형 스트립 도파기를 부가하여 광대역 임피던스 정합과 고주파 대역의 이득특성을 구현하였고, 접지면 반사기를 추가하여 저주파 대역의 이득 특성을 개선하였다. 안테나를 소형화하기 위해 다이폴과 반사기의 모양을 반 보우-타이(V) 형으로 변형하였으며, 여러 가지 파라미터들이 안테나 특성에 미치는 영향을 관찰하였다. 제안된 구조의 안테나를 지상파 DTV 주파수 대역인 470-806 MHz 대역에서 동작하도록 설계하였다. 최적화된 안테나를 FR4 기판 상에 제작하고 특성을 실험한 결과 VSWR < 2 인 대역 450-848 MHz, 이득 > 4.1 dBi, 전후방비 > 10.4 dB 등의 우수한 성능을 갖는 것을 확인하였다.