• Journal of the Mineralogical Society of Korea
• /
• v.20 no.3
• /
• pp.155-163
• /
• 2007

A novel route to the synthesis of tetramethoxysilane and other silicon alkoxides is described using siliceous mudstone as the raw material. The reaction of amorphous silica with triethanol-amine is enhanced by using an alkali metal hydroxide catalyst to form a range of triethanol-amnine-substituted silatrane species. These can undergo alkoxide exchange in acidic alcohols to form alkoxysilatranes, tetraalkoxysilanes, hexaalkoxydisiloxanes and higher siloxanes. Products were identified by FT-IR spectroscopy, XRD, SEM, 1H and 13C NMR spectroscopy, or gas chromatography.

• Korean Journal of Remote Sensing
• /
• v.28 no.6
• /
• pp.611-622
• /
• 2012

This study proposed two multisensor fusion methods for segment-based image classification utilizing a region-growing segmentation. The proposed algorithms employ a Gaussian-PDF measure and an evidential measure respectively. In remote sensing application, segment-based approaches are used to extract more explicit information on spatial structure compared to pixel-based methods. Data from a single sensor may be insufficient to provide accurate description of a ground scene in image classification. Due to the redundant and complementary nature of multisensor data, a combination of information from multiple sensors can make reduce classification error rate. The Gaussian-PDF method defines a regional measure as the PDF average of pixels belonging to the region, and assigns a region into a class associated with the maximum of regional measure. The evidential fusion method uses two measures of plausibility and belief, which are derived from a mass function of the Beta distribution for the basic probability assignment of every hypothesis about region classes. The proposed methods were applied to the SPOT XS and ENVISAT data, which were acquired over Iksan area of of Korean peninsula. The experiment results showed that the segment-based method of evidential measure is greatly effective on improving the classification via multisensor fusion.

• Korean Journal of Food Science and Technology
• /
• v.37 no.6
• /
• pp.1039-1041
• /
• 2005

Fibrinolytic activities of cultured medium and mycelium from 13 selected culturable mushrooms ranged 0.00-0.16 U and 0.00-0.48 U, respectively. Dry cell weight of Armillaria mellea was 6.50g/100mL, 1.9-5.0 fold higher than other tested mushrooms. Among artificially cultured mushroom fruiting bodies tested, fibrinolytic activity was lowest in Hericium erinaceus (0.17 U) and highest in Pleurotus ferulea (0.94 U).

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.244-246
• /
• 1998

Robust control for DC motor is needed according to the highest precision of industrial automation. However when a motor control system with PID controller has an effect of load disturbance, it is very difficult to guarantee the robustness of control system. As a compensation method solving this problem, in this paper, PID-supervision hybrid control method for motor control system is presented. If the PID control system (without the supervisory controller) is stable in the sense that the error is inside the constraint set, the supervisory control is idle. If the error hits the boundary of the constraint, the supervisory controller begins operation to force the error back to the constraint set. We prove that the PID-supervision hybrid control system is globally stable in the sense that the error is guaranteed to be within the tolerance limits specified by the system designer.

• Journal of Welding and Joining
• /
• v.31 no.5
• /
• pp.35-40
• /
• 2013

In this paper, we propose the Tangible Virtual Reality Representation Method to using haptic device and feature to morphology of created bead from Flux Cored Arc Welding. The virtual reality was started to rising for reduce to consumable materials and welding training risk. And, we will expected maximize virtual reality from virtual welding training. In this paper proposed method is get the database to changing the input factor such as work angle, travelling angle, speed, CTWD. And, it is visualization to bead from extract to optimal morphological feature information to using the Neural Network algorithm. The database was building without error to extract data from automatic robot welder. Also, the Neural Network algorithm was set a dataset of the highest accuracy from verification process in many times. The bead was created in virtual reality from extract to morphological feature information. We were implementation to final shape of bead and overlapped in process by time to using bead generation algorithm and calibration algorithm for generate to same bead shape to real database in process of generating bead. The best advantage of virtual welding training, it can be get the many data to training evaluation. In this paper, we were representation bead to similar shape from generated bead to Flux Cored Arc Welding. Therefore, we were reduce the gap to virtual welding training and real welding training. In addition, we were confirmed be able to maximize the performance of education from more effective evaluation system.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.4
• /
• pp.205-212
• /
• 2009

Intelligent Transport Systems(ITS) has been currently growing attention in industry as hightech traffic system and ITS infrastructure has been built not only on expressway but also on national highways. Although the effect of ITS installation on national highways is not easy to measure with quantitative methodology, it is necessary to develop the quantitative method to verify the effect accurate analysis of ITS effect. In this study, the analysis of cost efficiency of ITS project carried out by Iksan Regional Constriction Management Administration(IRCMA) was conducted. Analysis period and discount rate were assumed as 10 years and 5.5%, respectively. Several measures of the effect including reduction of travel time, CO2 discharged and fuel and the value of Variable Message Sign(VMS) information were proposed. Concludingly, ITS project implemented by IRCMA appeared to be cost effective, indicating 1.20 of B/C ratio, 12.4% of IRR and W1.48 billion of NPV.

• Korean Journal of Environmental Agriculture
• /
• v.23 no.2
• /
• pp.81-84
• /
• 2004

Biological oxygen demand (BOD) as a stream water quality indicator was monitored monthly in the Mankyeong and Dongjin river basins from June 2001 to October 2002 to evaluate water qualitied as well as to get the information on the water quality management strategy in Semangeum reclamation areas. BOD in the Mankyeong river was 5.4mg/L in average during the survey and increased after the inflow of Iksan tributary, which was contaminated with livestock wastewater. BOD of Iksan tributary was maintained at 5.4 mg/L before joining the Wanggung tributary, however, that in the downstream was increased to 13.6 mg/L in average due to the inlet of the livestock wastewater. Meanwhile, BOD of Dongjin river was the average of 2.8 mg/L during the survey periods but it showed 3.5 mg/L when Jungeup tributary which was contaminated with sewage and industrial wastewater joined into the main stream. BOD in both Mankyeong and Dongjin rivers decreased in 2002 as compared to that in 2001.

• Applied Chemistry for Engineering
• /
• v.9 no.4
• /
• pp.504-508
• /
• 1998

Experimental investigation on the adsorption of heavy metal confounds as $Fe^{2+}$, $Cu^{2+}$, $Mn^{2+}$, $Zn^{2+}$, $Ni^{2+}$, $Pb^{2+}$, $Cd^{2+}$, $Cr^{6+}$ using chitosan was carried out. The adsorption of each component of heavy metal compounds was measured by Atomic Absorption apparatus. The range of optimum pH for the removal rates of heavy metal compounds was found pH 7.0~9.0. The maximum time for the removal rate of $Fe^{2+}$ was observed about 15 min. The maximum time for the removal raters of $Cu^{2+}$, $Mn^{2+}$, $Zn^{2+}$, $Ni^{2+}$, $Pb^{2+}$, $Cd^{2+}$, and $Cr^{6+}$ was observed about 25 min. The adsorption rates of heavy metal compounds by chitosan have been found in the order of $Fe^{2+}>Cu^{2+}>Mn^{2+}>Zn^{2+}>Ni^{2+}>Pb^{2+}>Cd^{2+}>Cr^{6+}$.

• Journal of Environmental Health Sciences
• /
• v.49 no.4
• /
• pp.190-200
• /
• 2023

Background: Gunsan has been constantly affected by pollutants generated by the Saemangeum development and the construction industry since the completion of the Saemangeum seawall on April 27, 2010. However, there are limitations to its study, such as taking into consideration weather conditions, geographical factors, and foreign inflows. Objectives: In this study, we compared the Existing-CAPSS emissions of Gunsan with Recalculated-CAPSS emissions data to analyze the differences in emissions characteristics by year (2016~2019). Methods: Using Existing data on CAPSS emissions (2016~2019) and Recalculated-CAPSS emissions (2016~2019) for Gunsan, which were Recalculated following the improvement of emissions calculations for 2020, we organized CO, NO_X, SO_X, PM₁₀, VOC_S, and NH₃ emissions by substance and investigated the differences and characteristics of the Recalculated emissions by year. Results: For Re-CO and Re-PM₁₀, the emission characteristics of CO were examined as energy industry combustion and PM₁₀ emission characteristics were examined as ship cargo from non-road transportation sources, as ship leisure sources were excluded from non-road transportation source emissions. Conclusions: Comparing the emissions of Existing-CAPSS and Recalculated-CAPSS in Gunsan, the emissions of Recalculated-CAPSS by substance decreased by 39.76% for CO, 9.98% for PM₁₀, 5.53% for VOC_S, and 9.24% for NH₃, while Re-NO_X increased by 2.86% and Re-SO_X increased by 1.97%. On the other hand, when comparing the emissions characteristics of Existing-CAPSS and Recalculated-CAPSS in Gunsan, Jeonju, and Iksan, the emission characteristics of Re-NO_X, Re-SO_X, Re-VOC_S and Re-NH₃ were similar to those of Ex-NO_X, Ex-SO_X, Ex-VOC_S, and Ex-NH₃. As such, Gunsan, Iksan, and Jeonju, showed differences in the comparison of different emission characteristics due to the geographical characteristics of the region (population, area, topography, weather factors) and the characteristics of the industrial complex (metal, petrochemical).

• Journal of the Economic Geographical Society of Korea
• /
• v.3 no.2
• /
• pp.5-22
• /
• 2000

Manufacturing industry in Chonbuk region has experienced relatively consistent increase during period 1975-1999. The importance of labor-intensive sectors such as textiles and clothing, wood and furniture, and food and drink, which had been traditionally major sectors in this region, has declined over the same period. On the other hand, the shares of more complex sectors like automobile, chemistry, communication equipment, and other machinery have gone up. The structural change of Chonbuk manufacturing industry, with increasing diversity, follows the national trend of industrial development, based on national industrial policies. but the speed and level of the change has been slow and low in terms of the national standard of manufacturing development, especially with the weak development of high technology industry. In Chonbuk, the spatial distribution of manufacturing industry has shown a high degree of concentration. Although spatial concentration is apparent in the central area including the cities of Chonju, Iksan, and Kunsan, new tendency towards industrial decentralization within this area has been found. The tendency means manufacturing development at the fringe of this area. There is another tendency towards industrial dispersion into the cities of Kimje and Jeongup close to this central area. The spatial dispersion of manufacturing industry has been accelerated in the form of increasing external investment. But despite the tendency of the spatial dispersion, the development of manufacturing industry in the rest of the region still remains a marked inferiority.