• Journal of Positioning, Navigation, and Timing
• /
• 제4권4호
• /
• pp.151-160
• /
• 2015

GPS L2C signal is a recently added civil signal to L2 frequency and is constructed by time division multiplexing of civil moderate (L2-CM) and civil long (L2-CL) code signals. While the L2-CM code is 20 ms-periodic and modulates satellite navigation message, the L2-CL code is 1.5s-periodic with 767,250 chips long code sequence and carries no data. Therefore, the L2-CL code signal allows receivers to perform a very long coherent integration. However, due to the length of the L2-CL code, the acquisition of the L2-CL code signal may take too long or require too much hardware resources. In this paper, we propose a three-step ultra-fast L2-CL code acquisition (TSCLA) technique for dual band GPS receivers. In the proposed TSCLA technique, a dual band GPS receiver sequentially acquires the coarse/acquisition (C/A) code signal at L1 frequency, the L2-CM code signal, and the L2-CL code signal to minimize mean acquisition time (MAT). The theoretical performance analysis and numerous Monte Carlo simulations show the significant advantage of the proposed TSCLA technique over conventional techniques introduced in the literature.

• 한국위성정보통신학회논문지
• /
• 제9권2호
• /
• pp.110-113
• /
• 2014

본 논문에서는 가우시안 이진 대칭 채널에서 쇄상부호를 사용할 때의 최적 내 외 부호율에 관하여 연구한다. 쇄상부호의 전체 부호율이 고정되어 있을 때, 내 부호율이 감소할수록 내 부호의 오류 검출 능력은 향상되지만, 반대로 외 부호의 오류 정정 능력은 감소하게 된다. 이러한 trade-off 관계를 이용하여 본 논문에서는 쇄상부호의 최대 성능 이득을 얻기 위한 내 부호와 외 부호에의 최적의 중복(redundancy) 분포에 관하여 연구한다. 분석한 결과, 가우시안 이진 대칭 채널에서는 외 부호화율을 최소화하고 내 부호화율을 최대화함으로써 전체 쇄상부호 시스템의 성능을 극대화 시킬 수 있음을 알 수 있었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.649-652
• /
• 2004

In this paper, a concatenated RS and Turbo code is proposed for OFDM system over burst error channel. The concatenated code used in this study is a RS(255,2D2) code and a rate 1/2 turbo code. The turbo code uses 2 recursive systematic convolutional (RSC) code as the constituent codes and the parity bit are punctured to get the desired code rate. It is shown by simulation that the conventional OFDM system fails when there exists burst noise. The concatenated RS and turbo code obtains at least 5dB gain over the turbo code at the bit error probability of $10^{-3}$.

• 한국산업정보학회논문지
• /
• 제9권2호
• /
• pp.17-22
• /
• 2004

In this paper, a concatenated RS and Turbo code is proposed for OFDM system over burst error channel. The concatenated code used in this study is a RS(255,202) code and a rate 1/2 turbo code. The turbo code uses 2 recursive systematic convolutional (RSC) code as the constituent codes and the parity bit are punctured to get the desired code rate. It is shown by simulation that the conventional OFDM system fails when there exists burst noise. The concatenated RS and turbo code obtains at least 5dB gain over the turbo code at the bit error probability of 10/sup -3/.

• ETRI Journal
• /
• 제33권1호
• /
• pp.60-70
• /
• 2011

Software is completely exposed to an attacker after it is distributed because reverse engineering is widely known. To protect software, techniques against reverse engineering are necessary. A code encryption scheme is one of the techniques. A code encryption scheme encrypts the binary executable code. Key management is the most important part of the code encryption scheme. However, previous schemes had problems with key management. In an effort to solve these problems in this paper, we survey the previous code encryption schemes and then propose a new code encryption scheme based on an indexed table. Our scheme provides secure and efficient key management for code encryption.

• 한국CDE학회논문집
• /
• 제19권3호
• /
• pp.224-235
• /
• 2014

Recently, Productivity of the construction industry has been decreasing than other industries. Because of this, BIM is being spread in the construction industry. However, quality criteria for BIM data is insufficient. Regulation information is an important factor for initial architectural design evaluations. However, building code and related regulation are numerous. National building code structure in Korea is much more complex than other countries. The purpose of this study is to suggest the typology method of building code and apply to real regulations. To achieve this purpose, the authors have extracted required information to from original regulation for code checking and suggested mapping methods between extracted information and information of IFC scheme. In addition, the authors have represented EXPRESS-G diagram for extracting information from IFC scheme and suggested code checking method through stair case. Output of this study can be used as a base line data for automated code checking system based on open BIM. Automated code checking system will be utilized in architectural design evaluations and supported to increase design quality. It can be used to mount in SEUMTER that is the construction administration system of Ministry of Land, Infrastructure and Transport (MOLIT).

• 정보처리학회논문지A
• /
• 제14A권1호
• /
• pp.31-38
• /
• 2007

주어진 입력 프로그램과 의미적으로 동등하면서 좀 더 효율적인 코드로 바꾸는 것을 코드 최적화라 하며, 이런 과정은 코드 최적화기예 의해 수행된다. 본 논문에서는 코드 최적화기를 자동적으로 생성하는 도구인 코트 최적화긴 생성기를 설계하고 구현하였다. 즉 패턴 형식에 대한 표현을 입력으로 받아 기술된 형태의 최적화 코드를 찾아내는 DFA 패턴 매칭을 위한 코드 최적화기를 자동적으로 생성하는 것이다. DFA 패턴 매칭은 패턴들의 정규화 과정을 통해 패턴 검색 시 발생하는 중복 비교를 제거하여, 패턴 형태의 단순화 및 구조를 개선함으로 비용이 적게든다. DFA 패턴 매칭을 위한 코드 최적화기의 자동적 생성은 다양한 형태의 중간코드로 바뀌더라도 해당하는 코트 최적화기를 만들어야 하는 수고를 덜어줌으로써 코드 최적화에 대한 정형화(formalism)를 할 수 있다. 또한, DFA로 구성되어 최적화를 하기 때문에 최적화 속도가 빠르고, 코드 최적화기를 만드는데 필요한 시간과 비용을 절약할 수 있는 장점을 가진다.

• Journal of Positioning, Navigation, and Timing
• /
• 제10권4호
• /
• pp.307-313
• /
• 2021

Modernized GNSS signal structures tend to use tiered codes, and all GNSSs use binary codes as secondary codes. However, recently, signals using polyphase codes such as Zadoff-Chu sequence have been proposed, and are expected to be utilized in GNSS. For example, there is Tiered Differential Polyphase Code (TDPC) using polyphase code as secondary code. In TDPC, the phase of secondary code changes every one period of the primary code and a time-variant error is added to the carrier tracking error, so carrier tracking ambiguity exists until the secondary code phase is found. Since the carrier tracking ambiguity cannot be solved using the general GNSS receiver architecture, a new receiver architecture is required. Therefore, in this paper, we describe the carrier tracking ambiguity and its cause in signal tracking, and propose a receiver structure that can solve it. In order to prove the proposed receiver structure, we provide three signal tracking results. The first is the differential decoding result (secondary code sync) using the general GNSS receiver structure and the proposed receiver structure. The second is the IQ diagram before and after multiplying the secondary code demodulation when carrier tracking ambiguity is solved using the proposed receiver structure. The third is the carrier tracking result of the legacy GPS (L1 C/A) signal and the signal using TDPC.

• 한국CDE학회논문집
• /
• 제21권4호
• /
• pp.433-442
• /
• 2016

This paper aims to define the relational logic of in-between code articles as well as within atomic sentences in Korean Building Code, as an intermediate research and development process for the automated building permit system of Korea. The approach depicted in this paper enables the software developers to figure out the logical relations in order to compose KBimCode and its databases. KBimCode is a computer-readable form of Korean Building Code sentences based on a logic rule-based mechanism. Two types of relational logic definition are described in this paper. First type is a logic definition of relation between code sentences. Due to the complexity of Korean Building code structure that consists of decree, regulation or ordinance, an intensive analysis of sentence relations has been performed. Code sentences have a relation based on delegation or reference each other. Another type is a relational logic definition in a code sentence based on translated atomic sentence(TAS) which is an explicit form of atomic sentence(AS). The analysis has been performed because the natural language has intrinsic ambiguity which hinders interpreting embedded meaning of Building Code. Thus, both analyses have been conducted for capturing accurate meaning of building permit-related requirements as a part of the logic rule-based mechanism.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.221-224
• /
• 2001

A new code: LS code was proposed for IMT-2000 CDMA system. The code has special properties during a certain time of interval: 1) perfect autocorrelation 2) perfect crosscorrelation. The perfect autocorrelation means that the autocorrelation has nMaximum for zero time-offset and zero for other times during a certain time. Moreover the perfect crosscorrelation means that the crosscorrelation has zero during a time of interest. In the LAS-DMA system, the LS code is only used in the spreading of data bits in contrast to the conventional CDMA system. Therefore the LS code pair setting and allocation order should be dealt with carefully considering the special properties of LS code. This paper is intended as an investigation of the setting LS code pair and the sequential allocation method. Firstly, the optimum LS code pair set is proposed in order to minimize PAPR. Secondly, the sequential allocation method is studied to either minimize PAPR or expand IFW.