• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2006.05a
• /
• pp.193-198
• /
• 2006

최근의 동남아시아 발생한 지진해일(쓰나미)과 미국 뉴올리언즈 지역의 허리케인으로 등의 재난으로 인해 막대한 인명과 경제적 피해가 전 세계적으로 빈번히 발생하고 있다. 우리나라도 폭설과 태풍, 산불로 인한 피해가 해마다 증가하고 있는 실정이다. 본 연구에서는 '05년 양양지역의 대규모 산불재해지역을 중심으로 항공레이저측량, GPS/INS항공사진측량 등의 다중센서를 이용하여 GSIS자료를 취득하였다 이를 통해 수치지형도, 수치고도모형, 수치외관모형, 디지털 영상, 근적외선 영상을 처리하였으며, 과거 항공사진자료와의 비교 분석을 통해 정확한 피해면적과 피해량, 향후 산사태가 발생할 수 있는 지역 예측 및 식생에 대한 피해정도와 회생가능성을 분석하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.34-39
• /
• 1993

Presented in this paper is a complete error covariance analysis for strapdown inertial navigation system(SDINS). We have found that in SDINS the cross-coupling terms in gyrocompass alignment errors can significantly influence the SDINS error propagation. Initial heading error has a close correlation with the east component of gyro bias erro, while initial level tilt errors are closely related to accelerometer bias errors. In addition, pseudo-state variables are introduced in covariance analysis for SDINS utilizing the characteristics of gyrocompass alignment errors. This approach simplifies the covariance analysis because it makes the initial error covariance matrix to a diagonal form. Thus a real implementation becomes easier. The approach is conformed by comparing the results for a simplified case with the covariance analysis obtained from the conventional SDINS error model.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.664-667
• /
• 1996

This paper presents the error parameter estimation technique for IMU(Inertial Measurement Unit) which is core sensor of INS(Inertial Navigation System) and verifies it via laboratory test. Firstly the error characteristic of gyroscope and accelerometer which is contained in IMU is examined and the error modelling is executed. The error of IMU can be divided into deterministic and random part, and the deterministic error can be divided into static and dynamic part. This paper consider the random part as constant. Secondly the error parameter estimation technique and following procedure for laboratory test is explained. Thirdly according to the test procedure the IMU test for static error is executed using 2-axis rate table and estimation result is presented with discussion about its validity.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.3
• /
• pp.368-377
• /
• 2009

In this paper we study the gyro bias calibration method of SDINS(Strap-Down Inertial Navigation System). Generally, SDINS's calibration is performed in 2-axis(or 3-axis) rate table with chamber for varying ambient temperature. We assumed that the majority of calibration-parameter except for gyro bias is knowned. During gyrobias calibration procedure, it can be induced some disturbances(accelerometer's short-term error induced rate table rotation and anti-vibration mount's rotation). In these cases, old gyro-bias calibration methods(using velocity error or attitude error) have an error, because these disturbances are not detectable at the same time. So that, we propose a new gyro-bias calibration method(heading error minimizing using equivalent linear transformation) that can detect anti-vibration mount's rotation. And we confirm efficiency of the new gyro-bias calibration method by simulation.

• Journal of the KSME
• /
• v.34 no.7
• /
• pp.546-557
• /
• 1994

원격 조정식 비익체(이하 RPV : Remoteloted Vehicle)의 안정성을 향상시키고 조정을 간략화하기 위하여 사용되고있는 관성센서에 관해서 알아본다. 관성센서의 기본 원리는 뉴톤의 운동 제3 법칙인 관성의 법칙이고, 특징은 외부 측정기준을 필요로 하지 않은 점에 있으므로, 관성센서를 탐재한 RPV는 공중에서 운동 상태를 외부의 정보 없이 검토할 수 있다. 실제적으로 기계용으로 실용화되고 있는 센서는 관성항법장치(INS:Inertial Navigation System)라고 불리워지는 매우 고급자립형 장치로부터 자이로 컴파스로 불리워지는 방위 자이로와 자기 방위 센서를 조합한 방법까지 여러 가지가 있지만, 여기에서는 산업용 소형 RPV의 크기, 가격 및 입수성에서 이용이 가능하다고 생각되는 센서를 중심으로 원리, 종류 및 응용예를 설명한다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.3
• /
• pp.50-57
• /
• 2008

A telemetry ground station has a highly directional, parabolic tracking antenna to receive a weak telemetry signal from a target at a distance. The tracking antenna with narrow beam-width normally uses the auto-track method for the target tracking. This paper presents several issues in the auto-track method and introduces a new tracking method using Self-Slaving technique. Self-Slaving means that the tracking antenna is slaved to not data measured by RADAR but GPS/INS informations received by the telemetry system for pointing. The Self-Slaving method shows good performance in comparison with auto-track method.

• Journal of Korea Water Resources Association
• /
• v.33 no.S1
• /
• pp.20-27
• /
• 2000

The grid-based KIneMatic wave STOrm Runoff Model(Kim, 1998; Kim, et al., 1998) which predicts temporal variation and spatial distribution of saturated overland flow, subsurface flow and stream flow was evaluated at two watersheds. this model adopts the single overland flowpath algorithm and simulates surface and/or subsurface water depth at each cell by using water balance of hydrologic components. the model programmed by C-language uses ASCII-formatted map data supported by the irregular gridded map of the GRASS (Geographic Resources Analysis Support System) GIS and generates the spatial distribution maps of discharge, flow depth and soil moisture of the watershed.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.53-56
• /
• 1987

Gyroscope is a key sensor for inertial navigation system (INS) which is a navigational instrument necessary to guide and control a free vehicle, and an important instrument for defense, aeronautical, and space industries that is and will be actively involved. In this study, design parameters, scale factor and linearity, of torquer which is one of the components of two degree of freedom dynamically tuned gyroscope (DTG) are presented. The magnetic circuit of torquer is so complicated that it is difficult to analyze it with analytic method. Thus these parameters are calculated by using finite element method with analysis of magnetic vector potential for axisymmetric 3-dimension magnetic field.

• Journal of the Optical Society of Korea
• /
• v.2 no.1
• /
• pp.13-21
• /
• 1998

Based on the escape cone concepts, high-brightness light-emitting diodes (LEDs) have been analyzed. In AlGaAs or InGaAlP LEDs, photon absorption in the ohmic region under the electrode is known to be significant. Thus, ins general, a thick window layer (WL) and a transparent substrate (TS) would minimize photon shielding by the electrodes and considerably improve photon output coupling efficiency. However, the schemes do not seem to be necessary in InGaN system. Photon absorption in ohmic contact to a wide bandgap semiconductor such as GaN may be negligible and, as a result, the significant photon shielding by the electrodes will not degrade the photon output coupling efficiency so much. The photon output coupling efficiency estimated in InGaN LEDs is about 2.5 - 2.8 times that of the conventional high-brightness LED structures based on both WL and TS schemes. As a result, the extenal quantum efficiency in InGaN LEDs is as high as 9% despite the presumably very low internal quantum efficiency.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.5
• /
• pp.623-629
• /
• 2012

In this paper, we analysis the performance of position estimation when adopting Dynamic TDMA(DTDMA) in JTIDS RelNav. JTIDS RelNav is widely understood as a new navigation solution possibly capable to support or take cover of the role of conventional systems including INS or GPS no matter if they are working well or not. By maximizing the efficiency of radio resource management in MAC(Medium Access Control) layer we enhance the system performance without any replacement of hardware.