• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.42 no.4
• /
• pp.63-68
• /
• 2005

In this paper, the single coaxial fed and circularly polarized patch antenna for the RFID system in 2.45GHz ISM band has been fabricated. The simulation by HFSS, electro-magnetic field simulator was executed in order to decide the location of feed which is difficult to be analysed. The simulated result has the same tendency as the measured one in the view of input impedance with the variation of feed location. VSWR of fabricated antenna is low($\leq$1.2) even in comparatively high dielectric loss epoxy substrate(FR4), and this value is enough for the application of RFID reader antenna.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.288-293
• /
• 2003

In this paper, Filter could use to IMT2000 repeater using resonator of Comb-line form that has waveguide structure and designed. Coupled resonators designed using slot in wall between resonators to compact. 5-stage resonators have equal structure and input and output part was optimized to get into minimum impedance. Band pass filter characteristic satisfied design condition as result that used Chebyshev function that have 0.2 dB ripple and analyze using simulation tool.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.12 s.115
• /
• pp.1206-1211
• /
• 2006

In this paper, a Balun-BPF with the balun and BPF characteristics is proposed by using dual-mode ring resonator of $1{\lambda}$. We obtained the property of balun with the phase imbalance by symmetrically placing each output of ring resonator. The dual mode has been made by impedance difference between input and output lines. The fabricated Balun-BPF shows bandwidth of 40 MHz and insertion loss of 2.4 dB at a center frequency of 2.45 GHz. It shows the phase imbalance of $180{\sim}184$ degree and the magnitude imbalance of within 1 dB. The measured frequency responses agree well with simulated ones.

• Journal of electromagnetic engineering and science
• /
• v.17 no.4
• /
• pp.178-180
• /
• 2017

This study presents a 2-20 GHz monolithic distributed power amplifier (DPA) using a $0.25{\mu}m$ AlGaN/GaN on SiC high electron mobility transistor (HEMT) technology. The gate width of the HEMT was selected after considering the input capacitance of the unit cell that guarantees decade bandwidth. To achieve high output power using small transistors, a 12-stage DPA was designed with a non-uniform drain line impedance to provide optimal output power matching. The maximum operating frequency of the proposed DPA is above 20 GHz, which is higher than those of other DPAs manufactured with the same gate-length process. The measured output power and power-added efficiency of the DPA monolithic microwave integrated circuit (MMIC) are 35.3-38.6 dBm and 11.4%-31%, respectively, for 2-20 GHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.9
• /
• pp.1802-1811
• /
• 1994

In this paper, the corrugated horn antenna used in the reflector feed horn of satellite is analyzed using the modal expansion method. The modal expansion method is represented by the summations of modals at each point so the exact prediction of field and phase patterns can be obtained. The least number of iterations to compute field patterns is proposed. By using this number. calculation of accurate near and far field patterns without comsuming a lot of computational effort is available. Three kinds of corrugated horn antenna is designed to verify the method and experimented. The VSWR of designed frequency is from 1.04 to 1.1. The input impedance is nearly matched to $50\Omega$.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.2
• /
• pp.135-140
• /
• 2008

In this paper, the spiral antenna with the center frequencies of 315MHz, 433MHz, and 447MHz for RKE system of a vehicle is designed on PCB. The antenna is microstrip line-fed, and applied PIFA concept near the feeding part to easily tune center frequency and input impedance. The PIFA-type spiral antenna with the size of $30mm{\times}20mm$ is designed on printed PCB by considering the effect of circuits and components on PCB, ECU case and vehicle body. Also chip inductor inserted dual-band spiral antenna of 315MHz and 447MHz is designed. We found that the antenna designed on PCB satisfied the antenna specifications through measurement and field test.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12B
• /
• pp.1747-1753
• /
• 2001

This paper describe the design and fabrication of a SMD type Wilkinson power divider for PCS basestation. It has been designed for commercial power amplifier system by HP-ADS and fabricated with the size 0.56 $\times$ 0.35 inches. As a result, the power divider was well-operated in the frequency ranges of 1.75 ∼ 1.98GHz for the application of PCS system. The power divider reveals insertion loss 0.2dB, isolation -19.8dB, amplitude balance 0.02dB, phase balance 0.5o, input and output impedance matching -20.6dB respectively.

• Journal of Broadcast Engineering
• /
• v.18 no.6
• /
• pp.911-918
• /
• 2013

The proposed print antenna using Finite Difference Time Domain(FDTD) method is analyzed in this paper. A low radiation resistance and an ultra-wide band of this antenna are also presented. The propagation process of the reflected wave and the electric field distribution in the time domain are calculated in respectively. The antenna parameters are optimized for the maximum band width, return loss, input impedance, and radiation pattern in the frequency domain using Fourier transforming. The experimental bandwidth of the antenna is 1.85GHz~6.35GHz for the VSWR less than or equal to 2.0. The measured results are relatively in good agreement with the FDTD results. The proposed antenna can be applied to various applications such as UWB, broadcasting-network system.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2326-2328
• /
• 1999

Developments of effective and economic diagnostic apparatus for industrial plastic insulated high voltage power cables are in discontented condition still. Some report told that DC high voltage was damaged plastic insulation of a partially aged power cable to lead breakdown easily. But now, we have no alternative tools of DC diagnostic apparatus, and we try to reduce a possibility of hazard DC diagnosis. DC diagnostic apparatus still have many advantages to field cable engineer like low price, portability easy applications and sufficient data. Main hazard of DC diagnosis is excessive hight of applied voltage Recent developments for DC diagnosis use considerably low voltage. But new test methods need special measuring device and manipulator, like high input impedance voltmeter, low leakage current high voltage switches, etc. So that reason, new DC diagnostic devices are normally very expensive and have low efficiency, economically. We try to design a composite test device for 3$\sim$4 newly developed method, have economical benefit th industrial engineer.

• Proceedings of the KIEE Conference
• /
• 1997.07c
• /
• pp.1124-1126
• /
• 1997

The Unified Power Flow Controller(UPFC) with a series inverter and a shunt inverter ia able to control all three line Parameters(voltage, impedance and phase angle) and so UPFC technology has the potential to enhance the implementation and broad application of the FACTS concept with improved Performance. In this Paper, the UPFC is applied in order to improve the power flow oscillation damping. The modal performance measure is minimized in order to determine the optimal parameters of UPFC controller for damping Power flow oscillations. The dynamics of the injected voltage of UPFC is represented as a first order delay element. The UPFC controller used here is of the PIO type and the input signal to the controller is the active power flow through the UPFC. The effect of UPFC application to the Power system are analyzed from the stand point of power system oscillation damping.