• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.643-648
• /
• 2003

The problem considered in this paper is that the tip position of a flexible cantilever beam is controlled to follow a command signal, using a pair of piezoelectric actuators at the clamped end. The beam is lightly damped and so the natural transient response is rather long, and also since the sensor and actuator are not collocated, the plant response is non-minimum phase. Two control strategies were investigated. The first involved conventional PID control in which the feedback gains were adjusted to give the fastest closed-loop response to a step input. The second control strategy was based on an internal model control (IMC) architecture. The control filter in the IMC controller was a digital FIR device designed to minimize the expectation of the mean square tracking error. The IMC controller designed fur the beam was found to have very much reduced settling times to a step input compared with those of the PID controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.40-46
• /
• 1993

In this paper, we design a multirate controller for a given multirate sampled-data system which has a periodic output measurement scheme. A sufficient condition for maintaining observability in multirate sampled-data systems is given first. The design strategy for disturbance rejection is proposed. The proposed controller has IMC structure, and can be deomposed into a disturbance estimator and the inverse of fast plants.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.255-256
• /
• 2007

본 논문에서는 주파수 응달특성의 해석을 통하여 제어기를 설계하는 방법을 제안하였다. 모델의 오차가 없다는 가정 하에 완벽 제어가 가능한 IMC-PID 구조를 사용 한으로 하나의 변수인 제어 조절 인자만으로 제어기를 설계하였다. 이 변수를 선정하는 방법으로는 위상여유와 이득여유를 고려한 방법을 수학적으로 유도하였다. 이는 설계자가 이미 알고 있는 일반적인 유도 식을 이용함으로 설계를 보다 쉽게 할 수 있다. 이를 통하여 원하는 설계사양을 만족 시키도록 하는 IMC-PID제어기의 설계 변수 값들을 수학적으로 제시하고, 그 유용성을 사례 연구와 분석을 통해 검토하였다.

• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.422-424
• /
• 1997

In this paper, we characterize the whole class of vector fields that can be linearized by a given nominal state transformation and a feedback linearizing controller. The necessary and sufficient condition for a given uncertain vector field to be so-called "completely linearizable by the nominal coordinate transformation" is given in terms of Lie Bracket of uncertain vector fields and some suitable vector fields of the nominal system.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.11a
• /
• pp.111-116
• /
• 2004

In this paper, parameters of a given DC motor system are estimated using the model adjustment technique and the real coded genetic algorithm(RCGA) technique. A number of tuning methods, based on experience and experiment, such as Ziegler-Nichols, Cohen-Coon, IMC, L-ITAE Method have been proposed to obtain parameters for the PID controller. This paper proposes estimating parameters of PID controller using RCGA. The performance of the proposed algorithm is demonstrated through simulations and experiences.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.422-425
• /
• 1997

We consider the robust control problem for nonminimum phase(NMP) systems with parametric uncertainty which appear often in aircraft and missile control. First, a new method that makes such an uncertain NMP system to be factored as a interval minimum phase(MP) transfer function and a time delay term in the Pade approximation form has been presented. The controller to be proposed consists of a compensator $C_{Q}$(s) with Smith predictor in the internal model control(IMC) structure, so that it can have good robustness and performance against the structured uncertainty and the time delay behaviour due to NMP plant the $C_{Q}$(s) is designed on the MP model by using QFT. The stability and performance of overall system has been evaluated by the generalized Kharitonov theorem.rem.

• Journal of Institute of Control, Robotics and Systems
• /
• v.2 no.2
• /
• pp.73-80
• /
• 1996

This paper proposes a stabilizing controller for the multirate sampled-data systems which have a periodic output measurement scheme. A sufficient condition for maintaining observability in the multirate sampled-data system is derived and a design strategy for disturbance rejection is proposed. The proposed controller has IMC structure, and can be decomposed into the disturbance estimator and the inverse of the fast uniform sampled plant. We assume that the plant is open-loop stable and the disturbance consists of a sum of finite number of sinusoids with different frequencies. An example is presented for illustrations.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1571-1574
• /
• 2003

A shared compliant control scheme based on IMC is proposed for the position-force force reflecting control system. The controller of the slave manipulator is designed by IMC method for the open loop unstable plant. The compliant control is implemented by first order low pass filter. In the proposed scheme, the slave manipulator well tracks the position of the master manipulator in free space and the compliance of the slave manipulator is autonomously controlled in contact condition. The simulation results show that the excellence of the proposed controller.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.66-68
• /
• 2004

PID제어기를 플랜트 파라미터를 이용하여 구성하는 IMC-PID제어에 대해 연구한다. 특히 변하는 플랜트에 대해서는 자기동조(ST, Self-Tuning)를 사용하여 시스템을 식별하여 활용한다. 특히 실시간으로 개루프의 위상여유 및 이득여유를 모니터링하여 정해진 구역을 벗어나게 되면 식별된 시스템파라미터를 이용하여 IMC-PID제어기를 구성한다. 또 시간영역 지표로 과도한 오차가 발생하는 경우에도 제어기를 갱신함으로서 전체적으로 보면 견실 PID제어기 형태를 갖게 한다.

• Journal of Power Electronics
• /
• v.9 no.3
• /
• pp.456-463
• /
• 2009

The paper presents a method for controlling induction motors using a nonlinear internal model control (IMC) approach. The process model and the inverse model are developed in the rotor flux coordinate. The main advantage of the proposed method is that it easily specifies the performance (steady state error, transient response, etc.) and the robustness of the controller by means of the IMC filters. Simulation results illustrate the effectiveness of the proposed method. Results on a real time system show that the control system has good performance and robustness against changes in motor parameters (rotor and stator resistances, rotor and stator inductances, rotor inertia).