• Current Photovoltaic Research
• /
• v.6 no.4
• /
• pp.109-118
• /
• 2018

Silicon (Si) solar cells are the most successful technology which are ruling the present photovoltaic (PV) market. In that essence, multijunction (MJ) solar cells provided a new path to improve the state-of-art efficiencies. There are so many hurdles to grow the MJ III-V materials on Si substrate as Si with other materials often demands similar qualities, so it is needed to realize the prospective of Si tandem solar cells. However, Si tandem solar cells with MJ III-V materials have shown the maximum efficiency of 30 %. This work reviews the development of the III-V/Si solar cells with the synopsis of various growth mechanisms i.e hetero-epitaxy, wafer bonding and mechanical stacking of III-V materials on Si substrate. Theoretical approaches to design efficient tandem cell with an analysis of state-of-art silicon solar cells, sensitivity, difficulties and their probable solutions are discussed in this work. An analytical model which yields the practical efficiency values to design the high efficiency III-V/Si solar cells is described briefly.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1992.05b
• /
• pp.73-74
• /
• 1992

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2004.05a
• /
• pp.25-25
• /
• 2004

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.38-38
• /
• 2006

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.2
• /
• pp.41-46
• /
• 2020

The characteristics of the residual stress on the types of the substrate was investigated with adjusting the V/III ratio during GaN growth via the HVPE method. GaN single crystal layers were grown on a sapphire substrate and a GaN template under the conditions of V/III ratio 5, 10, and 15, respectively. During GaN growth, multiple hexagonal pits in GaN single crystal were differently revealed in accordance with growth condition and substrate type, and their distribution and depth were measured via optical microscopy(OM) and white light interferometry(WLI). As a result, it was confirmed that the distribution area and depth of hexagonal pit tended to increase as the V/III ratio increased. Moreover, it was found that the residual stress in GaN single crystal decreased as the distribution area and depth of the pit increased through measuring micro Raman spectrophotometer. In the case of GaN growth according to substrate type, the GaN on GaN template showed lower residual stress than the GaN grown on sapphire substrate.

• Korean Journal of Materials Research
• /
• v.23 no.12
• /
• pp.732-736
• /
• 2013

AlN epilayers were grown on a c-plane sapphire substrate using hydride vapor phase epitaxy (HVPE). A series of AlN epilayers were grown at $1120^{\circ}C$ with V/III ratios 1.5, 2.5 and 3.5, and the influence of V/III ratio on their properties was investigated. As the V/III ratio was increased, the surface roughness (RMS roughness), Raman shift of $E_2$ high peaks and full-width at half-maximum (FWHM) of symmetrical (002) & asymmetrical (102) of the AlN epilayers increased. However, the intensities of the Raman $E_2$ high peaks were reduced. This indicates that the crystal quality of the grown AlN epilayers was degraded by activation of the parasitic reaction as the V/III ratio was increased. Smooth surface, stress free and high crystal quality AlN epilayers were obtained at the V/III ratio of 1.5. The crystal quality of AlNepilayers is worsened by the promotion of three-dimensional (3D) growth mode when the flow of $NH_3$ is high.

• Journal of the Korean Electrochemical Society
• /
• v.8 no.3
• /
• pp.135-138
• /
• 2005

We investigated the electrochemical formation of a stoichiometric III-V compound semiconductor of InSb from an aqueous citric solution. Under an? optimized electrochemical condition, not like other research results, the electrodeposited InSb are satisfied exactly with the stoichiometry. Furthermore it retains the inherent characteristics of III-V compound semiconductor, InSb without heat treatment. EPMA, XPS and XRD were employed for confirmation of its composition/stoichiometry, chemical state, and crystallographic orientation, respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.3
• /
• pp.89-93
• /
• 2014

In this study, effects of the V/III ratio on a-plane GaN epitaxial on r-plane grown by HVPE have been investigated. According to increasing of V/III ratio, the value of FWHM of a-plane (11-20) GaN and the value of surface roughness (Ra) were decreased. Growth rate of a-plane GaN epitaxial layer were increased until V/III ratio = 7 as the increasing of V/III ratio, but it was reduced at V/III ratio = 10. At V/III ratio = 10, the FWHM of a-plane (11-20) GaN RC and the surface roughness (Ra) were 829 arcsec and 1.58 nm, respectively, as the lowest value in this study. Also for V/III ratio = 10, cracks under surface or voids were observed the lowest values in images of optical microscope. An M-shaped azimuthal dependence over $360^{\circ}$ angle range was observed for all samples. At V/III ratio = 10, the difference of FWHM of a-plane GaN between $0^{\circ}$ and $90^{\circ}$ was 439 arcsec revealed as the lowest value in the 4 samples.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1213-1218
• /
• 2004

Film growth rate of InP and GaAs using TMI, TMG, TBA and TBP is numerically predicted and compared to the experimental results. Obtained results show that the film growth rate is very sensitive to the thermal condition in the reactor. To obtain exact thermal boundary conditions at the reactor walls, we analyzed the gas flow and heat transfer in the reactor including outer tube as well as the inner reactor parts using a full three-dimensional model. The results indicate that the exact thermal boundary conditions are important to get precise film growth rate prediction.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.5
• /
• pp.442-453
• /
• 2023

Tandem or multijunction solar cells (MJSCs) can convert sunlight into electricity with higher efficiency (η) than single junction solar cells (SJSCs) by dividing the solar irradiance over sub-cells having distinct bandgaps. The efficiencies of various common SJSC materials are close to the edge of their theoretical efficiency and hence there is a tremendous growing interest in utilizing the tandem/multijunction technique. Recently, III-V materials integration on a silicon substrate has been broadly investigated in the development of III-V on Si tandem solar cells. Numerous growth techniques such as heteroepitaxial growth, wafer bonding, and mechanical stacking are crucial for better understanding of high-quality III-V epitaxial layers on Si. As the choice of growth method and substrate selection can significantly impact the quality and performance of the resulting tandem cell and the terminal configuration exhibit a vital role in the overall proficiency. Parallel and Series-connected configurations have been studied, each with its advantage and disadvantages depending on the application and cell configuration. The optimization of both growth mechanisms and terminal configurations is necessary to further improve efficiency and lessen the cost of III-V on Si tandem solar cells. In this review article, we present an overview of the growth mechanisms and terminal configurations with the areas of research that are crucial for the commercialization of III-V on Si tandem solar cells.