• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.227-228
• /
• 2006

In this paper, we introduce the design and fabrication of 60 GHz low noise amplifier MMIC for IEEE802.15.3c WPAN system. The 60 GHz LNA was designed using ETRI's $0.12{\mu}m$ PHEMT process. The PHEMT shows a peak transconductance ($G_{m,peak}$) of 500 mS/mm, a threshold voltage of -1.2 V, and a drain saturation current of 49 mA for 2 fingers and $100{\mu}m$ total gate width (2f100) at $V_{ds}$=2 V. The RF characteristics of the PHEMT show a cutoff frequency, $f_T$, of 97 GHz, and a maximum oscillation frequency, $f_{max}$, of 166 GHz. The performances of the fabricated 60 GHz LNA MMIC are operating frequency of $60.5{\sim}62.0\;GHz$, small signal gain ($S_{21}$) of $17.4{\sim}18.1\;dB$, gain flatness of 0.7 dB, an input reflection coefficient ($S_{11}$) of $-14{\sim}-3\;dB$, output reflection coefficient ($S_{22}$) of $-11{\sim}-5\;dB$ and noise figure (NF) of 4.5 dB at 60.75 GHz. The chip size of the amplifier MMIC was $3.8{\times}1.4\;mm^2$.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.133-136
• /
• 2008

In this paper, the parallel coupled line(PCL) band-pass filter satisfying IEEE 802.11a (a:$5.15{\sim}5.25$, b:$5.25{\sim}5.35$, c:$5.725{\sim}5.875$ [GHz]) has been designed for 5[GHz]band W-Lan RX-System applications. The designed PCL Band-Pass filter is of advantage to make a design formula that is small, light and approximate accuracy. It choose a microstrip plane figure because it is possible that a multiplicity of resonator was designed. It was shown that bandwidth was 14% from 5.15GHz to 5.92GHz at the -3dB designed filter. As a result, it is enough to use the designed filter at W-LAN RX-system of the 5GHz band.

• Electronics and Telecommunications Trends
• /
• v.19 no.5 s.89
• /
• pp.87-94
• /
• 2004

기존의 통신 시스템에 비해 매우 넓은 대역폭을 사용하는 UWB 시스템은 기존의 유선장치를 무선장치로대치할 수 있는 유일한 고속 무선 전송기술로서 가정내 멀티미디어 데이터 전송을 위한 근거리 무선 홈네트워크 기술로 부각되고 있다. 현재 IEEE802.15의 TG3a에서는 UWB 기술을 이용한 고속 WPAN의 물리계층에 대한 표준화가 진행되고 있으며, MBOA에서 주도하고 있는 MB-OFDM 시스템과 Motorola에서 주도하고 있는 DS-UWB 시스템의 2가지 제안서로 압축되어 표준화가 진행되고 있다. 본 논문에서는 현재까지의 표준화 진행 상황 및 양측에서 제안된 UWB 물리계층 표준화 기술 동향에 관하여 살펴본다.

• Journal of Communications and Networks
• /
• v.2 no.1
• /
• pp.46-57
• /
• 2000

Ongoing standardization effort on 3G cellular system in 3GPP (UNTS) is based on GPRS core network and promises a global standard for systems capable of offering ubiquitous access to internet for mobile users. Considered radio access systems(FDD CDMA, TDD CDMA, and EDGE) are optimized for robust mobile use. However, there are alternative relatively high-rate radio interfaces being standardized for WLAN (IEEE802.11 and HIPER-LAN/2) which are capable of delivering significantly higher data rates to static or semi-static terminals with much less overhead. Also WPANs(BLUETOOTH, IEEE802.15), which will be present in virtually every mobile handset in the near future, are offering low cast and considerable access data rate and thus are very attractive for interworking scenarios. The prospect of using these interfaces as alternative RANs inthe modular UMTS architecture is very promising. Additionally, the recent inclusion of M-IP in the UMTS R99 standard opens the way for IP-level interfacing to the core network. This article offers an overview into WLAN-Cellular interworking. A brief overview of GPRS, UMTS cellular architectures and relevant WLAN standards is given. Possible interworking architectures are presented.

• ETRI Journal
• /
• v.36 no.3
• /
• pp.352-360
• /
• 2014

This paper presents a 900 MHz zero-IF RF transceiver for IEEE 802.15.4g Smart Utility Networks OFDM systems. The proposed RF transceiver comprises an RF front end, a Tx baseband analog circuit, an Rx baseband analog circuit, and a ${\Delta}{\Sigma}$ fractional-N frequency synthesizer. In the RF front end, re-use of a matching network reduces the chip size of the RF transceiver. Since a T/Rx switch is implemented only at the input of the low noise amplifier, the driver amplifier can deliver its output power to an antenna without any signal loss; thus, leading to a low dc power consumption. The proposed current-driven passive mixer in Rx and voltage-mode passive mixer in Tx can mitigate the IQ crosstalk problem, while maintaining 50% duty-cycle in local oscillator clocks. The overall Rx-baseband circuits can provide a voltage gain of 70 dB with a 1 dB gain control step. The proposed RF transceiver is implemented in a $0.18{\mu}$ CMOS technology and consumes 37 mA in Tx mode and 38 mA in Rx mode from a 1.8 V supply voltage. The fabricated chip shows a Tx average power of -2 dBm, a sensitivity level of -103 dBm at 100 Kbps with PER < 1%, an Rx input $P_{1dB}$ of -11 dBm, and an Rx input IP3 of -2.3 dBm.

• Journal of Korea Multimedia Society
• /
• v.15 no.4
• /
• pp.516-525
• /
• 2012

In this paper, an efficient technique for enhancing the QoS of multimedia service for an WiMedia network applying distributed cooperative medium access (D-MAC) protocol is proposed. D-MAC protocol has been proposed to support high-rate Wireless Personal Area Networks (HR-WPANs) by the WiMedia Alliance. Unlike the centralized IEEE 802.15.3 MAC, the D-MAC UWB specified by WiMedia supports all devices to be self-organized and removes the SOP (Simultaneous Operating Piconet) problem, i.e., packet collisions between overlapped piconets in the centralized IEEE 802.15.3 MAC. However the WiMedia D-MAC can't prevent reduce the throughput degradation occurred by mobile nodes with low data rate. Therefore, a distributed cooperative MAC protocol for multi-hop UWB network is proposed in this paper. The proposed technique can intelligently select the transmission path with higher data rate to provide real-time multimedia services with minimum delay, thus enhances QoS of multimedia service.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.2
• /
• pp.70-80
• /
• 2007

Inter-vehicular communication suffers from a variety of the problem on the road, resulting in large delay in propagating emergency warning. An energy depletion as well as a transmission delay may induced by traffic accident. A transmission delay are caused by direct contention from nodes that can hear each other or indirect contention from nodes that can not hear each other, but simultaneously transmit to the same destination. A variety of works have been researched to solve the transmission delay and energy consumption problem in intelligent cars transportation systems. We consider a vehicle-to-vehicle communication protocol for disseminating an emergency information that include end-to-end and energy efficient transmission. In this paper, we propose A vehicle-to-vehicle communication protocol scheme for dissemination emergency information in intelligent cars communication based on IEEE 802.15.3 wireless personal area networks. Results from a simulation study reveal that our scheme can achieves low latency in delivering emergency warnings, and efficiency in consuming energy in stressful road scenarios.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.3
• /
• pp.179-184
• /
• 2010

In this paper, we analyze and simulate the performance of RAKE receiver for ultra wide band (UWB) systems in indoor multipath radio channel. Pulse position modulation-time hopping (PPM-TH) signal is considered. And we also consider three types of RAKE receivers, which are ideal RAKE, selective RAKE, and partial RAKE receivers. The indoor channel is modeled as the modified Saleh and Valenzuela (SV) model which has been proposed as a UWB channel model by the IEEE group, IEEE 802.15.SG3a.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.3
• /
• pp.258-272
• /
• 2010

The low-rate (LR) UWB is a promising technology for the ubiquitous sensor network (USN) due to its extremely low power consumption and simple transceiver implementation. However the limited communication range is a bottleneck for its widespread use. This paper deals with a new frame structure of class 4 active RFID multi-hop relay system based on ISO/IEC 18000-7 standard integrating with IEEE 802.15.4a LR-UWB PHY layer specification, which sets up a connection to USN. As a result of the vital importance of the coverage and throughput in the application of USN, further we analyze the performance of the proposed system considered both impulse radio UWB (IR-UWB) and chirp spread spectrum (CSS). Our simulation results show that the coverage and throughput are remarkably increased.

• Journal of Advanced Information Technology and Convergence
• /
• v.8 no.2
• /
• pp.147-157
• /
• 2018

In this study, we analyzed an outdoor visible light communication system and implemented it through a simulation. We designed a Reed-Solomon encoder, a variable interleaver structure, and set it to the Institute of Electrical and Electronics Engineers (IEEE) 802.15.7 PHY I specification mode. We also analyzed the performance of an additive white gaussian noise (AWGN) channel environment using a root-raised-cosine (RRC) filter, implemented a MATLAB simulation and analyzed its performance. The results showed a requirement for an additional signal-to-noise ratio (SNR) of approximately 1.5 dB in a 3-ray multipath visible light channel environment than in an AWGN environment.