• 한국세라믹학회지
• /
• 제49권6호
• /
• pp.498-504
• /
• 2012

Oxide layers were prepared by an environmentally friendly plasma electrolytic oxidation (PEO) process on an Al-1050 substrate. The electrolyte for PEO was an alkali-based solution with $Na_2SiO_3$ (8 g/L) and NaOH (3 g/L). The influence of the electrical parameters on the phase composition, microstructure and properties of the oxide layers formed by PEO were investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The voltage-time responses were recorded during various PEO processes. The oxides are composed of two layers and are mainly made of ${\alpha}$-alumina, ${\gamma}$-alumina and mullite phases. The proportion of each phase depends on various electrical parameters. It was found that the surface of the oxides produced at a higher current density and Ia/Ic ratio shows a more homogeneous morphology than those produced with the electrical parameters of a lower current density and lower Ia/Ic ratio. Also, the oxide layers formed at a higher current density and higher Ia/Ic ratio show high micro-hardness levels.

• 생약학회지
• /
• 제29권4호
• /
• pp.271-276
• /
• 1998

The inhibitory effects of MeOH extracts of 100 medicinal herbs on monoamine oxidase (MAO) activity were investigated. MAO was purified from mouse brain and its activity was determined by fluorospectrophotomer using kynuramine as a substrate. Nine kinds of MeOH extracts of herbs including Artemisia iwayomogi showed a mild inhibitory effect with ${100}-{200}\;{\mu}/ml$ in their $IC_{50}$ values on MAO activity. Seventeen MeOH extracts including Juglans mandshurica exhibited a weak inhibition of MAO activity with ${200}-{300}\;{\mu}/ml$ in their $IC_{50}$ values.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권7호
• /
• pp.351-363
• /
• 2001

This paper presents an experimental investigation on the heat trensfer characteristic of micro pipe (MHP) array with 38 triangular microgrooves. A heat pipe is an effective heat exchanger operating without external power. The heat pipe transfers heat by means of the latent heat of vaporization and two-phase fluid flow driven by the capillary force. The overall size of the MHP array can be put undermeath a microelectonic die and integrated into the electrronic package of a microelectronin device to dissipate the heat from the die. The MHP array is fabricated by micromachining with a silicon wafer and a glass substrate. The MHP was filled with water and sealed. The experimental results show the temperature decrease of 12.1$^{\circ}C$ at the evaporator section for the input power of 5.9 W and the improvement of 28% in the heat transfer rate.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.531-534
• /
• 2005

This paper presents a new data line sharing technique for TFT-LCD panels. This technique reduces the number of data driver IC's to half by having two adjacent pixels share the same data line. This in turn doubles the number of gate lines, which are integrated directly on the glass substrate of amorphous silicon for further cost reduction and more compactness. The proposed technique with new pixel array structure was applied to 15.4 inch WXGA TFT-LCD panels and has proven that the number of driver IC's were halved with nearly 41% circuit cost reduction and 5.3% reduction in power consumption without degrading the image quality.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2005년도 춘계 학술대회
• /
• pp.79-83
• /
• 2005

IT 기술, 반도체 산업 등의 급격한 발전에 힘입어 최근의 첨단 전자, 통신제품은 초경량 초소형화와 동시에 고기능 복합화의 발전 추세를 보이고 있다. 이런 추세에 발맞추어 전자제품, 통신제품의 핵심적인 부품인 IC chip도 소형화되고 있다. IC chip 패키징 기술의 하나인 Filp Chip Package는 Module Substrate 위에 Chip Surface를 Bumping 시킴으로서 최단의 접속길이와 저열저항, 저유전율의 특성도 가지면서 초소형에 높은 수율의 저 원가생산성을 갖는 첨단의 패키징 기술이다. 이런 패키징 기술은 수요증가와 더불어 폭발적으로 늘어나고 있으나 까다로운 공정기술에 의해 아직 여러 회사에서 장비가 출시되고 있지 못한 상태이다. 이에 본 연구에서는 최근 수요가 증가하는 LCD Driver IC용 COF 장비를 위한 Flip chip Bonding 장비 및 시스템을 설계, 제작하였다.

• 한국임상약학회지
• /
• 제8권2호
• /
• pp.139-142
• /
• 1998

The effects of MeOH extracts from 28 herbal medicines on monoamine oxidase (MAO) activity were investigated. MAO was purified from mouse brain and its activity was determined by fluoro-photometry using kynuramine as a substrate. Three MeOH extracts, Coptis japonica, Cinnamomum cassia and Poncirus trifoliate from the herbal medicines showed a strong inhibitory effect with less than $100\;{\mu}g/ml$ in their inhibitory amounts of $50\%$ ($IC_{50}$ values) on MAO activity. Four MeOH extracts including Evodia officinalis exhibited a mild inhibition of MAO activity with $100-200\;{\mu}g/ml$ in their $IC_{50}$ values.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2002년도 추계기술심포지움논문집
• /
• pp.177-179
• /
• 2002

A1$_2$ $O_3$기판재료의 $K_{IC}$ 증가를 위한 재료설계를 시도하였다. 먼저 A1$_2$ $O_3$기판을 구성하는 A1$_2$ $O_3$다층구조물에 적절한 다공성 중간층을 삽입하는 샌드위치 구조물을 제조하였다. 제조된 A1$_2$ $O_3$구조물의 미세구조를 관찰하였고, Vickers 경도와 three-point bending test를 통해서 단일조성 구조물과 샌드위치 구조물의 경도와 인성 측정치를 비교하였다. 다공층을 삽입한 A1$_2$ $O_3$샌드위치 구조물의 Single-Edge Notched Beam이 단일 조성의 구조물에 비해 파괴강도와 인성이 향상되는 결과를 얻었다.

• 한국재료학회지
• /
• 제3권6호
• /
• pp.645-651
• /
• 1993

Bulk반절연 기판 웨이퍼에 이온 주입법에 의한 기존의 GaAs집적회로 제작시 발생하는 문제점을 보완하고자 반절연 기판 위에 반절연성의 고저항 GaAs 에피층을 성장하는 연구를 수행하였다. 먼저 반절연 기판의 EPD분포를 조사하고, MOCVD와 MBE법을 이용하여 undeped GaAs반절연성 에피층을 성장시켜 실제 집적회로의 제작에 적합한지를 평가하였다. 평가방법은 반절연성 에피\ulcorner을 buffer층으로 성장시킨 에피 기판에 ungated FET를 제작하여, 이 반절연성 에피\ulcorner을 통한 누설전류를 측정하고, 또한 반절연 기판의 EP분호의 영향을 조사하였다. 누설 전류의 측정결과 비교적 주설 전류가 큰 1$\mu\textrm{m}$ 두께의 MOCVD시료에서도 270nA/mm로 FET의 pinch-off에는 영향을 주지 못하는 매우 작은 누설 전류 값을 나타내었다. 또한 누설전류의 분포가 반절연 기판의 EPD분포와 일치하는 것을 발견하여, 에피층의 quality에 기판의 결함이 미치는 영향을 확인하였다. MBE법으로 성장한 2$\mu\textrm{m}$ 두께의 undoped burrer층 시료는 휠씬 좋은 특성을 나타내었으며, 매우 균일하고 낮은 누설전류(40nA/mm)가 측정되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.2105-2107
• /
• 2004

In this study, Spiral inductors on the $SiO_2$/Si(100) substrate were fabricated by the magnetron sputtering method. Cu thin film with the thickness of 2 ${\mu}m$ was deposited on the substrate. Also we fabricated square inductors through the wet chemical etching technique. The inductors are completely specified by the turn width and the spacing between spirals. Both the width and spacing between spirals were varied from 10 to 60 ${\mu}m$ and from 20 to 70 ${\mu}m$, respectively. Inductance and Q factor dependent on the RF frequency were investigated to analyze performance of inductor arrays. Also, We recommend that the reasonable Q-factors, spec's turns and thickness of the coil for inductors cab be set to be ideal condition.

• 한국초전도ㆍ저온공학회논문지
• /
• 제10권1호
• /
• pp.6-9
• /
• 2008

We have investigated the MOD process successfully for the fabrication of the YBCO thick film on the $LaAlO_3$(001) single crystalline substrate. The cracking problem in YBCO thick film, a serious problem in the conventional TFA-MOD method, could be overcome with a careful control of precursor materials. Thus coating solution was prepared for the YBCO thick film by using fluorine-free precursor material. The precursor solutions were coated on the LAO(001) single crystalline substrate using the dip coating method, calcined at the temperature up to $500^{\circ}C$, and fired at various high temperatures for 2 h in a reduced oxygen atmosphere. Optimally processed YBCO thick film exhibited high critical current($I_c$) over 200 A/cm-width at 77K in self-field.