• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.229-232
• /
• 2001

4H-SIC(silicon carbide) MESFET large signal model was studied using modified Materka-Kacprzak large signal MESFET model. 4H-SiC MESFET device simulation have been conducted by Silvaco's 2D device simulator, ATLAS. The result is modeled using modified Materka large signal model. simulation and modeling results are -8V pinch off voltage, under $V_{GS=0V}$, $V_{DS=25V}$ conditions, $I_{DSS=270㎃}$mm, $G_{m=45㎳}$mm were obtained. Through the power simulation 2GHz, at the bias of $V_{GS=-4V}$ and $V_{DS=25V}$, 10dB Gain, 34dBm(1dB compression point)output power, 7.6W/mm power density, 37% PAE(power added efficiency) were obtained.d.d.d.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.3
• /
• pp.33-38
• /
• 2003

Marine sediment capping is a technique where clean sand is placed over contaminated sediment to reduce the migration of contaminants to the environment. The design of in-situ caps placed over marine sediment must take into consideration the self-weight consolidation of the cap and the consolidation of the sediment as a result of adding the cap layer. Centrifuge tests were adopted to simulate the effects of consolidation settlement of capped marine sediment caused by the placement of a clean sand layer. The modeling of models technique was utilized to verify the correct modeling procedures used in this study. Two centrifuge tests were conducted with the same boundary conditions at different gravitational accelerations of 100 g and 50 g. There was good agreement between these tests. It can be concluded that the centrifuge experiment is able to model consolidation settlement of capped marine sediment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.318-321
• /
• 2017

Most of wearable platforms(i. e. Samsung Gear, Android Wear) are using most of Tizen mobile platform features without any changes. However wearable devices have unique characteristics due to wearable type, small battery, screen shape, poor network and relative short but frequent user interfaces. In general, a wearable device has a process to be paired with the mobile device, which includes capability exchange that includes information such as device model name, network capability (3G, LTE, Wi-Fi and so on), manufacturer and supported languages. In other word, a wearable device depends heavily on the companion device (i. e. phone, tablet), so wearable platform should consider this. In this paper, we provide the effective application management mechanism using these characteristics of wearable platform to enhance user experience and to reduce sluggish of wearable platform.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.6
• /
• pp.687-695
• /
• 2002

Media-specific FEC techniques, suggested to confront with VoIP speech packet loss, improve speech quality at the expense of generating additional one-frame delay. In this paper, we suggest new media-specific FEC, i.e, LSF FEC technique which is able to improve speech quality with much shortened additional delay. In the proposed technique, the LSF parameters of the future frame are utilized to recover a lost packet. To evaluate performance of the proposed technique, we use ITU-T G.723.1 and G.729 Codec and apply Gilbert packet loss model and estimate MOS per every packet loss rate using PESQ speech quality estimation algorithm. The proposed technique has effect of shortening delay over from 6.5ms to 27ms compared with existing media-specific FEC techniques. Simulation results for comparison of reconstructed speech quality show this novel technique improves the MOS over 0.1 in practical lossy environment of 5 % packet loss rate.

• Polymer(Korea)
• /
• v.26 no.2
• /
• pp.227-236
• /
• 2002

The structure of pregel state in thermoreversible poly(vinylidene fluoride)(PVDF) /propylene carbonate(PC) system was investigated by laser light scattering. It was found that the PVDF chain did not exist as a separate chain even in a very dilute concentration(i.e. 100 times more dilute than the gel formation concentration) but as a large spherical aggregate with the radius of gyration $R_G$, of 232 nm and the effective hydrodynamic radius $R_H$= of 407 nm at $40^{\circ}C$. Based upon experimental results such as $R_H/R_G$=ratio of 1.75 and the pattern of scattering intensity with a minimum, a core-shell type sphere model was suggested as a structure of the aggregate. According to this model, the radius of core part was estimated as 215 nm, the shell thickness as 192 nm, and the ratio of monomer density of the shell part to that of the core part as about 0.075.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.26 no.3
• /
• pp.262-272
• /
• 2023

A polymer-based mechanical low-pass filter(m-LPF) for high-g accelerometers makes it possible to remove high-frequency transient noises from acceleration signals, thus ensuring repeatable and reliable measurement on high-g acceleration. We establish a prediction model for performance of m-LPF by combining a fundamental vibration model with the fractional derivative standard linear solid(FD SLS) model describing the storage modulus and loss modulus of polymers. Here, the FD SLS model is modified to consider the effect of m-LPF shape factor (i.e., thickness) on storage modulus and loss modulus. The prediction accuracy is verified by comparing the displacement transmissibility(or cut-off frequency) estimated using our model with that measured from 3 kinds of polymers(polysulfide rubber(PSR), silicone rubber(SR), and polydimethylsiloxane(PDMS)). Our findings will contribute a significant growth of m-LPF for high-g accelerometers.

• Electronics and Telecommunications Trends
• /
• v.27 no.3
• /
• pp.143-152
• /
• 2012

본고에서는 Machine Type Communications(MTC) 표준화 동향을 소개한다. MTC는 사람이 개입하지 않는 상태에서 기기 및 사물 간에 일어나는 통신이라고 정의하고 있고, 사물의 이동성, 도서, 산간, 해양 등을 포함하는 광범위한 서비스 지역, 네트워크의 운영 및 유지보수의 용이성, 신뢰도 높은 데이터 전송을 위한 보안, 그리고 서비스 품질 보장 등을 고려하여, 이동통신 네트워크를 기반으로 하는 사물통신을 수용하기 위한 것이다. 우선 M2M(Machine to Machine) 개념 및 3GPP(3rd Generation Partnership Project)에서 도출한 응용 분야를 기술하고, 이어서 3GPP MTC 표준화 일정을 살펴보고, 현재까지의 주요 표준 문서의 작성 내용 중 MTC 요구사항의 정의와 구조 모델의 정의, 과부하 제어를 위한 표준화가 주된 내용으로 2011년 9월에 완성된 Release 10 NIMTC(Network Improvements for MTC) 내용을 살펴보고, 마지막으로 현재 3GPP RAN(Radio Access Network)1에서 활발하게 논의되고, 작성하고 있는 저가의 MTC 단말을 지원하기 위한 방안에 대한 기술보고서의 내용에 대해서 살펴보았다.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.11a
• /
• pp.177-184
• /
• 2009

Cavitating flow simulation is of practical importance for many engineering systems, such as marine propellers, pump impellers, nozzles, injectors, torpedoes, etc. The present work has focused on the simulation of cavitating flow past cylinders with strong side flows. The governing equation is the Navier-Stokes equation based on the homogeneous mixture model. The momentum and energy equation is in the mixture phase while the continuity equation is solved liquid and vapor phase, separately. An implicit dual time and preconditioning method are employed for computational analysis. For the code validation, the results from the present solver have been compared with experiments and other numerical results. A fairly good agreement with the experimental data and other numerical results have been obtained. After the code validation, the strong side flow was applied to include the wake flow effects of the submarine or ocean tide.

• Journal of computational fluids engineering
• /
• v.9 no.2
• /
• pp.30-35
• /
• 2004

A numerical study of underexpanded jet and impingement on a wall mounted at various distances from the nozzle exit is presented. The 3-dimensional Wavier-Stokes equations and κ-ω turbulence equations are solved. The grids are constructed as overlapped grid systems to examine the distance effect. The DADI method is applied to obtain steady-state solutions. To avoid numerical instability such as the carbuncle phenomena that sometimes accompany approximate Riemann solver, the HLLE+ scheme is employed for the inviscid flux at the cell interfaces. A goal of this work is to apply a number of two-equation turbulence models based on the w equation to the impinging jet problem.

• Journal of computational fluids engineering
• /
• v.4 no.3
• /
• pp.28-34
• /
• 1999

The objective of this study is to present a numerical treatment of the pressure gradient when control volumes are sharing the interface between a homogeneous fluid and a porous medium. Two possible approaches, e.g. linear interpolation and extrapolation, are considered, and they are applied to the case of a steady and two-dimensional curved channel flow which is partially filled with a porous medium. It was found that the linear extrapolation produces a continuous velocity-field at the interface and thus is recommended. On the contrary, the linear interpolation entails a discontinuous velocity field at the interface, thereby warning its use in connection with the Brinkman-Forchheimer-extended Darcy flow model.