• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.223-224
• /
• 2005

In this paper, multiple regression analysis of the electrical characteristics for $HfO_2$ thin films grown by metal organic molecular beam epitaxy (MOMBE) was investigated. The electrical properties, such as, the accumulation capacitance and the hysteresis index, are the main factors to determine the characteristics of $HfO_2$ thin films. The input factors on the process are the substrate temperature, Ar gas flow, and $O_2$ gas flow. For statistical analysis, the design of experiments was carried out and the effect plots were used to analyze the manufacturing process. This methodology can predict the electrical characteristics of the thin film growth mechanism related to the process conditions.

• Elastomers and Composites
• /
• 제56권4호
• /
• pp.201-208
• /
• 2021

In this study, the effect of petroleum resin on the mechanical strength, morphology, and vibration damping characteristics of natural rubber (NR) composites was observed. The NR composites plasticized by adding petroleum resin showed decreased hardness and mechanical properties. A morphology analysis indicated that as the amount of petroleum resin increased, carbon black aggregates (or agglomerates) observed at the fracture surface decreased, resulting in an improvement in the dispersibility. In addition, as 20 phr of petroleum resin was added, the effective damping temperature range increased by approximately 11.4%, the hysteresis loss rate increased by 15.2%, and the resilience decreased by 36.6%. Therefore, it was confirmed that the vibration damping characteristics improved with the addition of petroleum resin. This was because the rubber-filler interaction between the NR molecular chain of the NR composite and the carbon black particles improved by the addition of petroleum resin.

• 한국자기학회지
• /
• 제21권1호
• /
• pp.15-22
• /
• 2011

강자성체를 정밀해석하기 위해서는 포화자화 현상과 히스테리시스 현상을 모두 고려해 주어야만 한다. Preisach 모델링은 변화율이 심한 히스테리시스 현상을 매우 잘 표현해 낼 수 있는 수치모사 방법이다. 하지만 정자기 유한요소법과 Preisach 모델링을 사용한 자화해석 반복 과정에서 수렴성이 떨어진다는 큰 문제점을 가지고 있다. 특히 자화율의 기울기가 급격히 변화할 경우 수렴에 많은 문제점을 가지고 있다. 이러한 문제점은 일반적인 M-H 변수를 사용하지 않고, M-B 변수를 사용하면 해결할 수 있다. 본 논문에서는 일반적인 M-H를 이용한 Preisach 모델링의 평면 분포로부터 M-H 변수를 M-B 변수화 시키는 방법을 제안하고 있고, 2차원 정자기 유한요소법과 M-H, M-B 변수를 이용한 Preisach 모델링을 비교 분석하여 Preisach 모델링의 수렴성 문제를 해결하는 방법에 대해 기술하였다.

• 전기학회논문지
• /
• 제58권10호
• /
• pp.1849-1854
• /
• 2009

This paper describes the design, evaluation and implementation of a compensating algorithm for an iron-cored measurement current transformer (CT) that removes the effects of the hysteresis characteristics of the iron-core. The exciting current resulting from the hysteresis characteristics of the core causes an error of the CT. The proposed algorithm decomposes the exciting current into the core loss current and the magnetizing current and each of them is estimated. The core loss current is calculated from the secondary voltage and the voltage-core loss current curve. The core flux linkage is calculated and then inserted into the flux-magnetizing current curve to estimate the magnetizing current. The exciting current at every sampling interval is obtained by summing the core loss and magnetizing currents and then added to the measured current to obtain the correct secondary current. The voltage-core loss current curve and flux-magnetizing current curves, which are different from the conventional curves, are derived in this paper. The performance of the proposed algorithm is validated under various conditions using EMTP generated data. The experimental test results of an iron-core type electronic CT, which consists of the iron-core and the compensation board, are also included. The results indicate that the proposed algorithm can improve the accuracy of the measurement CT significantly, and thus reduce the size and the cost of the CT.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권2호
• /
• pp.18-22
• /
• 2012

This paper presents a method and the experimental measurement system for the determination of Jiles-Atherton model parameters of the 30ZH120 electrical steel sheet. The paper utilizes Epstein Square devices to proceed with the experiment and measurement on a group of hysteresis loops of some certain transformers which use the 30ZH120 electrical steel sheet under two different lap ways. The approach relies on the simulated annealing optimization method in order to minimize the error between the measured and modeled hysteresis curves and yield the best five Jiles-Atherton model parameters. A convenient program, based on the Simulink platform, that can identify the J-A model parameters automatically from the experimental saturated hysteresis loop which is used to model the nonlinear characteristics of the electrical steel sheet, is developed. Research shows that the simulated annealing optimization method gets satisfactory results.

• 한국공간구조학회논문집
• /
• 제6권2호
• /
• pp.115-121
• /
• 2006

최근 바람 및 지진에 대한 진동제어를 목적으로 한 저항복점강재를 이용한 댐퍼가 많이 사용되고 있다. 그러나 전체 구조물의 진동에 영향을 미치는 저항복점강재의 동적특성 및 지진에너지 소산효과는 명확히 밝혀지지 않고 있다. 본 연구에서는 저항복점감재에 대한 반복재하실험 결과 및 저항복점감재를 정착한 3층 규모의 구조물에 대하여 실시한 강제진동시험의 결과에 대해 보고한다. 또한 저항복점강재의 지진에너지 소산양의 정량적인 평가를 위하여 수학적 이력형모델 및 등가선형해석법을 이용하여 평가한 결과에 대해 보고한다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1364-1369
• /
• 2005

In this paper, we have identified the mechanism of C-V hysteresis behavior often observed in pentacene organic thin-film transistors (OTFTs). The capacitance-voltage (C-V) characteristics were measured for pentacene OTFTs fabricated on glass substrates with MoW as gate/source/drain electrode and TEOS $SiO_2$ as gate insulator. The measurements were made at room temperature and elevated temperatures. From the room temperature measurements, we found that the hysteresis behavior was caused by hole injection into the gate insulator from the pentacene semiconductor for large negative gate voltages, resulting in the negative flat-band voltage shift. However electron injection was observed only at elevated temperatures

• 한국소음진동공학회논문집
• /
• 제15권3호
• /
• pp.290-296
• /
• 2005

This paper proposes the modeling scheme of the Miniature Universal Testing Machine (MUTM) composed of 36 thin-beam-type bimorph PZTs and the control algorithm to minimize the residual vibration of the MUTM in the dynamic testing of specimens. In the operation of the MUTM, hysteresis, residual displacement and vibration of it are major issues. From the analysis of the MUTM behaviors, the hysteresis is described by the curving fitting scheme with the function of an input voltage. The dynamic characteristics of the MUTM are identified by the frequency domain modeling technique based on the experimental data. The interested bandwidth is focused on 125-315HZ for effective modeling and control. For the robust vibration control of the MUTM, the sliding mode control and the Kalman filter as observer are proposed. The paper also proposes the best input signal type to operate the MUTM effectively. The feasibility of the proposed modeling scheme and control algorithm are tested and verified experimentally.

• Tribology and Lubricants
• /
• 제34권1호
• /
• pp.1-8
• /
• 2018

This paper presents the analysis of friction master curves for a sliding elastomer on rough granite. The hysteresis friction is calculated using an analytical model that considers the energy spent during the local deformation of the rubber due to surface asperities. The adhesion friction is also considered for dry friction prediction. The viscoelastic modulus of the rubber compound and the large-strain effective modulus are obtained from dynamic mechanical analysis (DMA). We accurately demonstrate the large strain of rubber that contacts with road substrate using the GW theory. We found that the rubber block deforms approximately to 40% strain. In addition, the viscoelastic master curve considering nonlinearity (at 40% strain) is derived based on the above finding. As viscoelasticity strongly depends on temperature, it can be assumed that the influence of velocity on friction is connected to the viscoelastic shift factors gained from DMA using the time-temperature superposition. In this study, we apply these shift factors to measure friction on dry granite over a velocity range for various temperatures. The measurements are compared to simulated hysteresis and adhesion friction using the Kluppel friction theory. Although friction results in the low-speed band match well with the simulation results, there are differences in the predicted and experimental results as the velocity increases. Thus, additional research is required for a more precise explanation of the viscoelastic material properties for better prediction of rubber friction characteristics.

• 대한전자공학회논문지SD
• /
• 제37권10호
• /
• pp.25-32
• /
• 2000

본 연구에서는 강유전체의 이력 특성을 정밀하게 계산하기 위한 모델을 제공하였다. 본 모델은 2중 전위우물에 근거한 반경험적 분극 천이 모델에 기초하고 있으며 프라이사흐의 이력 함수의 분포 모델의 물리적 특성과도 잘 일치되고 있음을 보였다. 본 모델은 강유전체 이력 특성의 천이 경사도와 임프린트 특성을 고려하고 있으며 인가 전압의 극성이 바뀌는 경우에 발생되는 부 이력 경로에 대해서도 정확하게 분극 전하의 변화를 표현하고 있음을 보였다. 본 모델의 예측 결과는 PZT와 SBT의 두 종류의 강유전체에 대해서 측정 결과와 잘 일치하고 있음을 보였다. 또한, 본 모델을 AHDL 코드로 구현하여 스펙트레 시뮬레이터를 통하여 회로 설계를 할 수 있는 환경을 제공하였다.