• Bulletin of the Korean Chemical Society
• /
• v.33 no.10
• /
• pp.3458-3460
• /
• 2012

• Nuclear Engineering and Technology
• /
• v.53 no.4
• /
• pp.1218-1223
• /
• 2021

A hydrophobic ionic liquid including an amino moiety ([DiOcAPmim][NTf₂]) was synthesized. Its extraction behaviors towards Pd(II), Ru(III), Rh(III) were investigated in nitric acid aqueous solution as a function of contact time, effect of concentration of nitric acid, effect of temperature, and effect of co-existing metal ions. The extraction kinetics of Pd(II) was fairly fast and extraction equilibrium can be attained within only 5 min under the [HNO₃] = 2.05 M. When [HNO₃]< 1 M, the extraction percentage of Pd(II), Ru(III), Rh(III) were all above 80%. When [HNO₃] reached 2 M, all of the extraction percentage decreased and in an order of Pd(II)>Ru(III)>Rh(III). When [HNO₃]> 2 M, the extraction performance gradually recovered. The effect of temperature can slightly affect the extraction performance of Pd(II). Furthermore, in simulated high-level liquid waste, [DiOcAPmim][NTf₂] showed a better preference towards Pd(II) under the interference of various other co-existing metal ions.

• Journal of Institute of Convergence Technology
• /
• v.4 no.2
• /
• pp.23-26
• /
• 2014

As an effective separation method for biomolecules, aqueous two-phase systems based on ionic liquids were suggested. Hydrophobic ionic liquids are more expensive and viscous in spite of their usage in the ionic liquid/water biphasic extraction compared with hydrophilic ionic liquids. In case of aqueous two-phase systems using hydrophilic ionic liquids, they can be diluted in aqueous phase. Experimental results show that aqueous two phase systems can be formed by adding appropriate amount of ionic liquids to aqueous salts solutions. The viscosity of ionic liquid aqueous phase is proportional to the cation chain length in ionic liquids. It is founded that the ionic liquid based aqueous two phase systems are effective for the separation of biomolecules such as acrylic acid.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.9
• /
• pp.2867-2872
• /
• 2012

SAN/$BMIPF_6$ nanofibers were fabricated by an electrospinning process and used as chemiresistors for sensing alcohol vapours. A hydrophobic and air-stable ionic liquid, $BMIPF_6$, was used to impart electrical conductivity to insulating SAN nanofibers. The effects of $BMIPF_6$ addition on the morphology of the nanofibers were explained in terms of surface tension, viscosity and conductivity. After exposing the SAN/$BMIPF_6$ nanofibers collected on an interdigitated electrode to alcohol vapours (ethanol, 1-propanol and 1-butanol), the resistance of the nanofibers decreased due to adsorption of alcohol molecules. The electrospun SAN/$BMIPF_6$ nanofibers sensor exhibited good sensitivity and reproducibility.

• Applied Chemistry for Engineering
• /
• v.32 no.3
• /
• pp.277-282
• /
• 2021

Two hydrophobic imidazolium based ionic liquids including 1-benzyl-3-butylimidazolium hexafluorophosphate [BzBIM]PF₆ and 1-pentyl-3-butylimidazolium hexafluorophosphate [PBIM]PF₆ having the same anion and different cation parts were synthesized. The structural composition of these ionic liquids were confirmed with Fourier-transform infrared spectroscopy (FT-IR) and proton nuclear magnetic resonance (¹H-NMR). Their physiochemical properties such as viscosity, ionic conductivity and thermal stability alongside electrochemical potential window range for both ionic liquid electrolytes were characterized and compared to each other. The overall results revealed that [BzBIM]PF₆ has higher thermal and electrochemical stabilities and viscosity than that of [PBIM]PF₆ probably due to the presence of benzyl ring in the imidazolium cation providing strong intermolecular π-π interactions.

• Applied Chemistry for Engineering
• /
• v.8 no.1
• /
• pp.29-38
• /
• 1997

In the w/o concentrated emulsion, the volume fraction of the dispersed is greater than 0.74 and the hydrophilic liquid is dispersed in the hydrophobic liquid of the continuous phase. The emulsion has the same appearance and behaviour as a gel. The polarity of the hydrophilic liquids and hydrophobic liquids, the pH and the ionic strength of the hydrophilic liquid are found to be important factors in the stability at the polymerization temperature such as $50^{\circ}C$. The lower the polarity of the hydrophobic liquid and the higher the polarity of the hydrophilic liquid, the more stable the emulsion. Electron microscopy studies of the hydrophilic-hydrophobic polymer composites show that the particles of polyacrylamide, the dispersed phase, are separated by he network of the thin film of polystyrene, the continuous phase. This hydrophilic-hydrophobic polymer composites show higher permselectivity to water in the mixture of water-ethanol. The pervaporation experiment shows that the selectivity of the membrane ranges between 4-40 and increases with increasing enthanol concentration in the feed. The rate of permeation decreases with increasing ethanol concentration in the feed.

• Journal of the Korean Electrochemical Society
• /
• v.5 no.4
• /
• pp.216-220
• /
• 2002

The effects of electrolytes on electrochemical behavior from an oil thin layer interposed between a graphite electrode and an aqueous solution phase were examined. A hydrophobic electroactive species, tetrachloro-1,4-benzoquinone (TCQ), in a benzonitrile (EN) layer was employed to study ion transfer properties across the BN-water interface. Experimental results showed that hydrophobic cations as well as anions could be successfully used as ionic charge carriers. The addition of various salts into either the oil layers or the aqueous solutions offers deeper insight for the electrochemistry of the liquid thin layer system. When aqueous perchloric acid is interfaced with the BN films, the perchlorate ion of tetrahexylammonium perchlorate (THAP) substantially suppresses the dissociated proton concentration in the layer by the common ion effect while there is only a little change in the total acid concentration. Further approach by theoretical calculation makes it possible to quantitatively understand the effect of the electrolytes to the electrochemical responses of TCQ, which were previously reported (Anal. Chem. 73, 337 (2001)).

• Journal of the Korean Electrochemical Society
• /
• v.11 no.4
• /
• pp.304-308
• /
• 2008

Noble Poly (lithium 2-acrylamido-2-methyl propane sulfonate) and its copolymer with N-vinyl formamide based on trihexyl (tetradecyl) phosphonium acetate [$(C_6H_{13})_3$ P ($C_{14}H_{29}$) $CH_3COO$; $P_{66614}$ $CH_3COO$] and trihexyl (tetradecyl)phosphonium bis(trifluoromethane sulfonyl) amide ([$(C_6H_{13})_3P(C_{14}H_{29})$] [TFSA];$P_{66614}TFSA$) were prepared and analyzed to determine their characteristics and properties. The ionic conductivity of a copolymer based $P_{66614}TFSA$ ionic liquid system exhibits a higher conductivity ($8.9{\times}10^{-5}Scm^{-1}$) than that of a copolymer based $P_{66614}CH_3COO$ system ($1.57{\times}10^{-5}Scm^{-1})$. The charge on the TFSA anion is spread very diffusely through the S-N-S core and particularly in the trifluoromethane groups, and this diffusion results in a decreased interaction between the cation and the anion. The viscosity of $P_{66614}TFSA$ (39 cP at 343 K) and $P_{66614}CH_3COO$ (124 cP at 343 K), which is very hydrophobic, was fairly high. High viscosity leads to a slow rate of diffusion of redox species. The ionic conductivity of copolymer of a phosphonium ionic liquid system also exhibits higher conductivity than that of a homopolymer system. Phosphonium ionic liquids were thermally stable at temperatures up to $400^{\circ}C$.

• Proceedings of the Korean Biophysical Society Conference
• /
• 1999.06a
• /
• pp.45-45
• /
• 1999

Cytochrome c (cyt c) binds to acidic membranes at low ionic strength. Replacement of Lys-72 or Lys-87 by Glu reduced the binding affinity of cyt c toward large unilamellar vesicles (LUV) in liquid crystalline phase. The differences were smaller for LUV in gel phase. A fraction of bound cyt c was non-electrostatically associated.(omitted)

• Bulletin of the Korean Chemical Society
• /
• v.33 no.11
• /
• pp.3601-3606
• /
• 2012

Structural properties of a small hexapeptide molecule modeled after metal-binding siderochrome immersed in a room-temperature ionic liquid (RTIL) are studied via molecular dynamics simulations. We consider two different RTILs, each of which is made up of the same cationic species, 1-butyl-3-methylimidazolium ($BMI^+$), but different anions, hexafluorophosphate ($PF_6{^-}$) and chloride ($Cl^-$). We investigate how anionic properties such as hydrophobicity/hydrophilicity or hydrogen bonding capability affect the stabilization of the peptide in RTILs. To examine the effect of peptide-RTIL electrostatic interactions on solvation, we also consider a hypothetical solvent $BMI^0Cl^0$, a non-ionic counter-part of $BMI^+Cl^-$. For reference, we investigate solvation structures in common polar solvents, water and dimethylsulfoxide (DMSO). Comparison of $BMI^+Cl^-$ and $BMI^0Cl^0$ shows that electrostatic interactions of the peptide and RTIL play a significant role in the conformational fluctuation of the peptide. For example, strong electrostatic interactions between the two favor an extended conformation of the peptide by reducing its structural fluctuations. The hydrophobicity/hydrophilicity of RTIL anions also exerts a notable influence; specifically, structural fluctuations of the peptide become reduced in more hydrophilic $BMI^+Cl^-$, compared with those in more hydrophobic $BMI^+PF_6{^-}$. This is ascribed to the good hydrogen-bond accepting power of chloride anions, which enables them to bind strongly to hydroxyl groups of the peptide and to stabilize its structure. Transport properties of the peptide are examined briefly. Translations of the peptide significantly slow down in highly viscous RTILs.