• 한국토양비료학회지
• /
• 제32권3호
• /
• pp.274-278
• /
• 1999

토성 조사 특히 토양 중의 점토 함량의 측정은 토양과 관련된 연구에서 흔히 이루어지는 분석이다. 본 연구에 관련된 연구에서 흔히 이루어지는 분석이다. 본 연구에서는 현재까지 점토 함량 측정에 널리 이용되고 있는 표준 hydrometer법이나 pipette법과 비교하여 보다 간편하고 신속한 분석법으로 제안되어 있는 micro-pipette법의 이용 가능성을 검토하였다. Micro-pipette법과 hydrometer법으로 측정된 점토 함량은 유의성이 높은 1:1의 상관관계를 가졌으며. micro-pipette법치 분석의 정밀도는 hydrometer법에 비교하여 크게 떨어지지 않는 것으로 나타났다. 또한 micro-pipette법은 짧은 침강 시간과 작은 침강 용기를 사용함으로써 작은 실험실 공간에서 많은 시료를 분석할 수 있었다.

• 대한건축학회논문집:구조계
• /
• 제34권5호
• /
• pp.13-18
• /
• 2018

In this research, regarding the type three blast furnace slag (BS) regulated by KS F 2563 and supplied to actual ready mixed concrete plant, the fineness on specification and actually measured fineness by Blain test were compared, and by applying the hydrometer method used for early prediction of concrete strength, the feasibility of the hydrometer method for acquisition inspection of BS was analyzed. Additionally, the influence of various fineness of BS on properties of cement mortar was also assessed. According to the experimental results of this research, correlation of fineness values between specification and actually measured data were not matched. In the case of the rapid evaluation method using hydrometer, a good relation was shown between the fineness data obtained from hydrometer and Blain test. furthermore, from the cement mortar properties test, there was a good relation was obtained between fineness data from rapid evaluation method by hydrometer and cement mortar properties, while there was no clear relation between fineness data from specification and cement mortar properties. Hence, as a qulity controlling method of BS fineness, a rapid evaluation method using hydrometer is suggested as a new method.

• 한국건설순환자원학회논문집
• /
• 제6권1호
• /
• pp.43-49
• /
• 2018

본 연구에서는 고로슬래그의 원료인 수쇄슬래그를 Ball mill로 분말도에 다양한 변화를 주어 제조한 다음 종전에 진행되었던 Hydrometer를 이용한 비중계법 콘크리트 조기 강도 추정의 원리를 적용하여 BS의 분말도 품질을 저렴하면서도 간편하고 신속하게 평가함으로써 BS 분말도 수입검사에 효과적으로 활용할 수 있도록 함에 있어 그 가능성을 분석하고자 하였다. 실험 결과 BS의 분말도가 클수록 액체밀도계의 침하시간이 지연되는 것으로 나타났으며, 3분의 혼탁액 밀도와 분말도의 상관관계 회귀식 y = 198 120 x - 193 936(R=0.9398)을 활용할 시 BS 분말도의 신속한 품질평가가 가능할 것으로 판단되었다. 따라서 레미콘 인수검사에서 BS의 분말도 품질 신속평가로 본 연구에서 제시하는 방법을 적용할 경우 저렴하고 간단하며 신속하게 BS 분말도 평가가 가능할 수 있을 것으로 분석되었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.20-21
• /
• 2017

There have been reports in the media about some refineries that omit the refining process and deliver raw material for reasons of cost reduction, shortening of production time, etc. Also, in most RMC factories acceptance inspection is not conducted on account of issues with the proficiency of the equipment and cost issues; instead only scores are relied upon. Therefore this study sought to analyze the relation between the value of the density of FA actually delivered to RMC companies, attained with the Hydrometer method, and its fineness, to see whether the quality of FA can be evaluated statistically. Results led to the conclusion that there is a problem in terms of credibility in the fineness of FA shown on the test report. Upon analyzing the difference between the fineness of FA as measured using Blaine's air permeability method and its density of the Hydrometer method, the correlation was found to be satisfactory; therefore the possibility of a FA fineness quality evaluation could be proved as well.

• 대한건축학회논문집:구조계
• /
• 제34권6호
• /
• pp.29-34
• /
• 2018

In this research, regarding the cement supplied to ready mixed concrete plant, the feasibility of rapid acquisition test for cement fineness using hydrometer which used for early strength evaluation of concrete was analyzed. Additionally, regarding the rapid test with hydrometer control factors were provided. As a result of analysis, quality control using hydrometer was possible with the regressive equation obtained in five minute between density of suspension and fineness of cement powder. As the control factors, dispersing admixture, replacing kerosene as a medium, and temperature of cement and water were evaluated. According to the control factor evaluation, the tap water was optimum as a medium and calibration of keeping the temperature of water to $20^{\circ}C$ or correction factor was needed for density results. Finally, it is considered that the suggested rapid quality evaluation method using hydrometer is cheaper and easier method than currently used Blaine test.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.167-168
• /
• 2017

With the recent increase in demand for construction there has been an increase in the use of the raw material cement when mixing concrete; managing quality of cement powder, therefore, is most important. Therefore this study sought at first to develop a rapid appraisal using the Hydrometer method researched previously, for it was thought that when suspending cement in a solution and applying the Hydrometer method to it the temperature changes in the solution would have a great effect on the density value of the Hydrometer method; yet there has been no report of such influence factors. Therefore after analyzing the influence factors that the type of suspending solution and changes in temperature could have on rapid appraisal of fineness, using the Hydrometer method, this study was able to determine that using water at 20℃ was the most appropriate, and with every temperature increase of 10℃ the value of fineness should also be increased above or below 7% as well.

• 센서학회지
• /
• 제12권6호
• /
• pp.258-264
• /
• 2003

본 연구에서는 영상처리를 통한 부액계의 교정방법을 연구한다. 이 방법은 부액계를 교정하기 위해 선정된 부액계의 측정눈금과 기준액체의 수평면을 교정자의 조작 없이 자동으로 일치시킨다. 이 시스템은 CCD카메라, frame grabber, 스텝모터, 영상처리를 포함한 시스템프로그램으로 구성된다. 영상처리프로그램은 부액계의 측정눈금부위와 기준액체의 수평면사이에서 발생하는 메니스커스를 검색하여 눈금을 일치시키는 부분과 스텝모터를 제어하는 부분으로 구성한다. 본 연구에서 개발한 시스템의 성능을 검증하기 위하여 교정자의 눈으로 직접 메니스커스와 측정눈금을 관측한 수동교정방법의 교정결과와 비교한다 각각의 교정값의 차이가 $0.004\;kg/m^3$ 이하로서 교정값의 측정 불확도 $0.06\;kg/m^3$을 고려하면 두 방법의 교정결과가 거의 같은 연구결과를 얻었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.87-88
• /
• 2018

The change in the degree of powder in cement is very important because it plays a major role in the reaction in the concrete. In this study, we intend to apply the principle of early estimation of concrete strength using the non-middling method previously conducted to the quality evaluation of cement powder. In other words, it is proposed to analyze the potential of Hydrometer density values and the data of temperature variation in the trust solution to propose a method of acceptance inspection. According to the experimental results, the quick evaluation of the cement distributorship will be possible if the resulting regression results are used : y = 161867.4 x₁ + 117.953 x₂ - 165437 (R = 0.9158).

• 한국토양비료학회지
• /
• 제39권5호
• /
• pp.315-320
• /
• 2006

토성 측정법인 비중계법의 정도시험을 10개 표준토양을 선정하여 침강실린더내 토양현탁액의 온도를 모니터링하면서 피켓법과 비교하여 수행하였다. 토양현탁액은 $13^{\circ}C$에서 $28^{\circ}C$까지 범위로 온도가 분포하였으며 현탁액의 온도변이는 $0.2^{\circ}C$에서 $4.4^{\circ}C$ 범위였다. 비중계법에 의한 점토함량은 피켓법과 -6.4%에서 4.0%까지 차이가 발생하였다. 이 때의 양과 음의 양극단의 높은 차이는 각각 점토함량이 매우 낮은 토양과 유기물함량, 교환성칼슘, pH가 상대적으로 높은 토양이었다. 이 두 토양을 제외한 나머지 토양에서는 차이가 3%이하였으며 점토함량이 25% 이상인 토양에서는 거의 0에 가까웠다. 모래함량에서 -1.5%에서 2.0%까지 차이가 발생하였다. 차이가 가장 큰 토양은 점토함량에서와 유사하게 모래함량이 가장 낮은 토양에서 나타났다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.226-227
• /
• 2017

Basic lot tests via textile and visual examinations are conducted on FA carried into in-service RMCs. The system of evaluating quality by taking samples from each lot and examining them, or evaluating quality based on the score reports submitted by the deliverer during in-service training have on some instances been called into doubt as to their reliability in evaluating the quality of FA. Therefore this study sought to measure the density value of FA that is actually delivered to RMC companies according to the Hydrometer method and analyze its correlation to its test scores, to in turn analyze the reliability of the test reports and the characteristics of the quality of FA. The results led to the conclusion that the fineness and density marked on the score reports were problematic, and therefore accurate experiments and adjustment of significant digits on the test report are necessary.