• 한국농공학회논문집
• /
• 제55권4호
• /
• pp.1-11
• /
• 2013

Unsaturated hydraulic conductivity function is one of key parameters to solve the flow phenomena in problems of landslide. Prediction models for hydraulic conductivity function related to soil-water retention curve equations in many geotechnical applications have been still used instead of direct measurement of the hydraulic conductivity function since prediction models from soil-water retention curve equations are attractive for their fast and easy use and low cost. However, many researchers found that prediction models for the hydraulic conductivity function can not predict the hydraulic conductivity exactly in comparison with experimental outputs. This research introduced an inverse analysis to evaluate the hydraulic conductivity function corresponding to experimental output from the flow pump system. Optimisation process was carried out to obtain the hydraulic conductivity function. This research showed that the inverse analysis with flow pump system was suitable to assess the hydraulic conductivity in unsaturated soil, and the prediction models for the hydraulic conductivity were led to the significant discrepancy from actual experimental outputs.

• 환경영향평가
• /
• 제9권1호
• /
• pp.25-37
• /
• 2000

This paper presents a study of hydrological and hydraulic model applications in environmental impact statements which were submitted during recent years in Korea. In many cases (almost 70 %), the hydrological and hydraulic changes were neglected from the impact identification processes, even if the proposed actions would cause significant impacts on those environmental items. In most cases where the hydrological and hydraulic impacts were predicted, simple equations were used as an impact prediction tool. Computer models were used in very few cases(5%). Even in these few cases, models were improperly applied and thus the predicted impacts would not be reliable. The improper applications and the impact neglections are attributed to the fact that there are no available model application guidelines as well as no requirements by the review agency. The effects of mitigation measures were not analyzed in most cases. Again, these can be attributed to no formal guidelines available for impact predictions until now. A brief guideline is presented in this paper. This study suggested that the model application should be required and guided in detail by the review agency. It is also suggested that the hydrological and hydraulic items shoud be integrated with the water quality predictions in future, since the non-point source pollution runoff is based on the hydrologic phenomena and the water quality reactions on the hydraulic nature.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2006년도 학술발표회 논문집
• /
• pp.1726-1731
• /
• 2006

본 연구에서는 임하다목적댐의 비상여수로 설계를 위하여 수리모형실험과 수치모형실험을 수행하였다. 수치모의에는 3차원 수치모형인 FLOW-3D를 사용하였다. 비상여수로 설계를 위하여 접근수로부, 월류웨어부, 천이부 및 도류부, 그리고 감세부로 나누어 수리모형실험과 수치모형실험의 수리현상 결과를 비교하였다. 최적의 비상여수로 설계를 위하여 기본계획안에 대하여 모의하고 이에 대한 보완점과 문제점들을 찾아내고 해결책을 제시하였다. 수치모의를 통하여 수리모형실험에서 쉽게 수행하기 어려운 다양한 조건을 모의하고 최적의 결과에 찾아 이를 수리모형실험으로 검증함으로써 비상여수로 기본설계안을 도출하였다.

• 대한토목학회논문집
• /
• 제31권6A호
• /
• pp.425-433
• /
• 2011

본 연구에서는 파랑하중에 의해 부유구조체 하면에서 발생하는 파압 현상을 규명하기 위한 실험적 연구를 수행하였다. 서로 다른 측면 형상과 하면 형상을 갖는 4개의 폰툰형 시험체를 제작하여 5 종류 파랑하중에 대한 수리모형실험을 실시하였다. 시험체의 하면에는 6개의 파압센서를 설치하였으며, 수리모형실험 동안 시험체 하면에 작용하는 파압을 측정하였다. 측정된 파압을 분석한 결과, 와플형의 하면 형상은 부유구조체 하면에 작용하는 파압에 거의 영향을 미치지 않으며, 하이브리드형의 측면 형상은 파압에 상당한 영향을 미치는 것으로 나타났다. 이것은 하이브리드형의 측면에 형성된 에어갭(Airgap)이 부유구조체에 작용하는 파랑의 충격 에너지를 일부 흡수하여 파압을 저감시키는데 기여하는 것으로 판단된다. 기존의 상자형 폰툰과 비교하였을 때 하이브리드형의 파압은 선수부에서 약 83%, 중간부에서 약 74% 및 선미부에서 약 53% 수준인 것으로 나타났다.

• Nuclear Engineering and Technology
• /
• 제55권3호
• /
• pp.1181-1190
• /
• 2023

Hydraulic performance and flow resistance tests were performed to confirm the main parameters of the hydraulic instrumentation that can affect the pump performance of the reactor coolant pump. The flow resistance test offers important experimental data, which are necessary to predict the behavior of the primary coolant when the circulation of the reactor coolant pump is stopped. Moreover, the shape of the hydraulic section of the pump, which was considered in the test, was prepared to compare the mixed-flow- and axial-flow-type models, the difference in the number of blades of the impeller and diffuser, the difference in the shape of the impeller blade and its thickness, and the effect of coating at the suction bell. Additionally, five models of the hydraulic part were manufactured for the experiments. In this study, the differences in performance owing to the design factors were confirmed through the experimental results.

• Journal of Biosystems Engineering
• /
• 제15권4호
• /
• pp.290-297
• /
• 1990

The purposes of this study were to perform theoretical analysis of an electronic-hydraulic hitch control system for position and draft control of tractor implements and to investigate the performance of the control system through computer simulation. Computer simulation models which could predict the responses of the system to the step and sinusoidal inputs in position and draft controls were developed using the simulation package "TUTSIM". The effects of control mode, hydraulic flow rate, deadband, and proportional constant on control performance of the system were investigated. The simulated results were compard with the experimental ones to verify the simulation models. The simulation models appeared to be a useful means for the analysis and the design of the electronic-hydraulic hitch control system.

• 한국토양비료학회지
• /
• 제42권Spc호
• /
• pp.8-13
• /
• 2009

심층토 내에서의 흐름과 이동과정을 포함하는 연구와 관리 측면에서 수학모델에 대한 관심도가 점점 증가하고 있다. 로제타는 토성이나 용적밀도 자료와 같은 대체 토양자료로부터 불포화수리특성에 대한 자료를 추정하는 프로그램이다. 이와 같은 형태의 모델은 애초 기본 토양자료를 수리특성자료로 전환하기 시작한 이래 대체 측정수단으로서 PTF라 불리워졌다. 이러한 기능은 유사-실험모델을 사용하여 예측한 자료를 근간으로 하여 직간접적으로 토양수분을 추정할 수 있다.

• 한국도로학회논문집
• /
• 제15권3호
• /
• pp.45-52
• /
• 2013

PURPOSES : This study is to construct the regression models of drainage asphalt concrete specimens and to provide the appropriate coefficients of hydraulic conductivity prediction models. METHODS: In terms of easy calculation of the hydraulic conductivity from porosity of asphalt concrete pavement, the estimation model of hydraulic conductivity was proposed using regression analysis. 10 specimens of drainage asphalt concrete pavement were made for measurement of the hydraulic conductivity. Hydraulic conductivity model proposed in this study was calculated by empirical model based on porosity and the grain size. In this study, it shows the compared results from permeability measured test and empirical equation, and the suitability of proposed model, using regression analysis. RESULTS: As the result of the regression analysis, the hydraulic conductivity calculated from the proposal model was similar to that resulted from permeability measured test. Also result of RMSE (Root Mean Square Error) analysis, a proposed regression model is resulted in more accurate model. CONCLUSIONS: The proposed model can be used in case of estimating the hydraulic conductivity at drainage asphalt concrete pavements in fields.

• 한국자동차공학회논문집
• /
• 제12권5호
• /
• pp.187-197
• /
• 2004

This paper presents the effects of cylinder shell elasticity on effective bulk modulus of oil $K_e$ in automotive hydraulic dampers. A theoretical model of cylinder shell bulk modulus $K_c$ based on the elasticity theory of thick-walled cylinder incorporating not only radial but longitudinal deformation is proposed. In a cylinder, values of $K_c$ by the new model and traditional models are computed and the discrepancies among them are discussed. In a twin-tube type automotive damper, the variation of $K_e$ under different pressure values in chambers of the damper cylinder, based on different theoretical models for $K_c$ is computed. Through these computations, it is shown that remarkable discrepancies in computed values of $K_e$ might occur according to the $K_e$ models in connection with $K_c$ models.

• 한국소음진동공학회논문집
• /
• 제13권5호
• /
• pp.393-399
• /
• 2003

Hydraulic mounts show strong1y frequency-dependent stiffness and damping characteristics in low frequency range, which result from so called inertia track dynamics. A lumped mass has been incorporated in several mechanical models of the literature to take the inertia effect of the fluid in the track into consideration. Although complex s%illness by the mechanical model showed good agreements with the measured values, there exists a critical pitfall. In this paper, the shortcomings of mechanical models with lumped mass for hydraulic founts are clearly identified by illustrating actual measurements of the stiffness parameters for a hydraulic mount. It is conclusively discussed that the inertia effect of the fluid flow through the circular track is significant but latent. As an alternative to the mechanical model, a hydraulic model is claimed to be used for further dynamic analysis of engine/mount system or whole car system.