• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8B
• /
• pp.812-821
• /
• 2009

This paper proposes a novel dynamically reconfigurable switch for various multimedia applications in hybrid NoC systems. Current NoC systems, which adopt hybrid NoC structure with fixed switch and job distribution algorithms, require designers to precisely predict the property of applications to be processed. This paper proposes a reconfigurable switch which minimizes buffer overflow in various multimedia applications running on an NoC system. To verify the performance of the proposed system, we performed experiments on various multimedia applications running on embedded systems, such as MPEG4 and MP3 decoder, GPS positioning system, and OFDM demodulator. Experimental results show that buffer overflow has been decreased by 41.8% and 29.0%, respectively, when compared with NoC systems having sub-clusters with mesh or star topology. Power usage has been increased by 2.3% compared with hybrid NoC systems using fixed switches, and chip area has been increased from -0.6% to 5.7% depending on sub-cluster topology.

• KSBB Journal
• /
• v.6 no.2
• /
• pp.123-128
• /
• 1991

The production of bassinosteroid-like substances of two hybrid types of Korean rice, Jangseongbyeo, Taebackbyeo were investigated. The shoots at the maximum tillering stage were extracted and purified by solvent fractionation, silica gel adsorption chromatography Sephadex LH-20 chromatography, charcoal adsorption chromatography, Bondesil chromatography and HPLC of reverse phase, successively. Biological activities of each purification step were monitored by the rice lamina inclination test. Higher activities against the rice lamina inclination test in the each purification step showed that the shoots of two cultivars biosynthesize brassinosteroids. Two cultivars also showed a similar distribution of biological activities of endogenous brassinosteroids detected by HPLC.

• Journal of the Korean Statistical Society
• /
• v.23 no.2
• /
• pp.421-444
• /
• 1994

Reliability acceptance sampling is concerned with whether to accept or reject a collection of items based upon the information obtained from life testing. Although various reliability acceptance sampling plans have been developed, little is known about their relatvie performances. This paper compares reliability acceptance sampling plans under Type II censoring, Hybrid censoring, and Time-Truncated Type II censoring assuming that the lifetimes of items in a lot follow an exponential distribution. The three plans are compared in terms of the power, the expected number of failures, and the expected time required to reach a decision. Computational experiments are conducted and the results are tabulated to provide guidelines for selecting an appropriate plan for a given situation.

• Journal of Korean Institute of Industrial Engineers
• /
• v.20 no.1
• /
• pp.15-25
• /
• 1994

The Bayesian approach to reliability acceptance sampling has several advantages over the non-Bayesian approach. For instance, the former usually requires less amount of testing time and smaller sample sizes than the latter. In this article, a Bayesian acceptance sampling plan(ASP) based on a failure-free period life test is developed under the assumption of exponential lifetime distribution, and is compared with the corresponding Bayesian hybrid ASP in terms of the expected completion time. It is found that the proposed ASP tends to have a smaller expected completion time than the Bayesian hybrid ASP as the prior assessment of the reliability of a lot becomes optimistic, and vice versa. Tables of failure-free period Bayesian ASP's are also included.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.598-602
• /
• 2002

This paper presents the 3-phase hybrid series active power filter with dynamic voltage restorer(DVR) which serve as an energy buffer and current harmonics blocking resistor connected to sensitive loads, such as, to compensate voltage dips and current harmonics in power distribution system. The DVR is to inject a dynamically controlled voltage generated by a forced commutated converter in series to the bus voltage by means of a booster transformer. The momentary amplitudes of the three injected phase voltages are controlled such as to eliminate any detrimental effects of a bus fault to the load voltage. The proposed system is able to simultaneously compensate current harmonics, voltage fluctuating and voltage unbalance in power distribution systems. The reference phase angle detected by synchronized with the positive sequence component of the unbalanced source by using symmetrical component transformation. The effectiveness of proposed system is verified by the computer simulation.

• Computational Structural Engineering : An International Journal
• /
• v.3 no.1
• /
• pp.19-29
• /
• 2003

In the present study, finite element linear buckling analysis is performed for grid-stiffened composite plates. A hybrid element with drilling degrees of freedom is employed to reduce the effect of the sensitivity of mesh distortion and to match the degrees of freedom between skins and stiffeners. The preliminary static stress distribution is analyzed for the determination of accurate load distribution. Parametric study of grid structures is performed and three types of buckling modes are observed. The maximum limit of buckling load was found at the local skin-buckling mode. In order to maximize buckling loads, stiffened panels need to be designed to be buckled in skin-buckling mode.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.76-81
• /
• 2007

The shopping center in underground passage increased for efficient space utilization in urban area. This study describes operation characteristics of all air type and hybrid type with local ventilation and fan coil unit fixed to ceiling. In order to compare energy saving, thermal environment and installation space, etc., integrated simulator with heat production and indoor distribution system is designed and constructed. Energy saving of the hybrid system is calculated as over 30% compared to conventional all air type. And also the results showed that humidity decreased about 6%, also indoor thermal distribution is improved as temperature variation of around $1^{\circ}C$.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.4B no.3
• /
• pp.134-145
• /
• 2004

This paper presents and analyses protection schemes for a series active compensator, which consists of a Unified Power Quality Conditioner (UPQC) or a hybrid active power filter. The proposed series active compensator operates as a high impedance "k(D)" for the fundamental components of the power frequency during over current conditions in the distribution system. Two control strategies are proposed in this paper. The first strategy detects the fundamental source current using the p-q theory. The second strategy detects the fundamental component of the load current in the Synchronous Reference Frame (SRF). When over currents occur in the power distribution system momentarily, the proposed schemes protect the series active compensator without the need for additional protection circuits, and achieves excellent transient response. The validity of the proposed protection schemes is investigated through simulation and compared with experimental results using a hybrid active power filter systems.

• Macromolecular Research
• /
• v.15 no.3
• /
• pp.211-215
• /
• 2007

Hybrid thin film nanostructures composed of metal nanoparticles (NPs) and self-assembled polymer films with different spatial distributions of NPs were analyzed by optical waveguide spectroscopy (OWS). Specifically, the dielectric constants were calculated using effective medium theory for the incorporation of 1 vol% Au NP into the block copolymer (BCP) films having a cylindrical nanodomain morphology. Three cases were considered: uniform distribution of NPs in the film; selective distribution of NPs only in the cylindrical domains; and segregation of NPs to the center of the cylindrical domains. The optical waveguide spectra derived from the calculated dielectric constants demonstrate the feasibility of experimentally distinguishing the composite nanostructures with different inner morphologies in the hybrid metal NP-BCP nanostructures, by the measurement of the dielectric constants using OWS.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.68 no.1
• /
• pp.52-60
• /
• 2019

In this paper, four types of insulation coils were fabricated by adding various kinds of glycols to improve the flexibility and adhesion of insulating coils in varnish dispersed with PAI / Nano Silica_15wt%. The applied voltage and frequency were 1.5 kV / 20 kHz for accelerated life evaluation. Through the 6th temperature stress level, the cause of the insulation breakdown of the coil was ignored and only the breakdown time was measured. The Arrhenius model was chosen based on the theoretical relationship between chemical reaction rate and temperature for estimating the insulation life of the coil due to accelerated thermal stress. Three types of distributions (Weibull, Lognormal, Exponential) were selected as the relationship between thermal stress model and distribution. The average insulation lifetime was estimated under the temperature stress of four types of insulation coils through the relationship between one kind of model and three kinds of distributions.