• 대한소아치과학회지
• /
• 제24권2호
• /
• pp.460-474
• /
• 1997

The purpose of this study was to evaluate and compare the effectiveness of various low-viscosity resin systems used as rebonding agents to prevent microleakage at the margins of class I composite resin restorations. Seventy sound human premolars were selected for experiment. Class I cavities were prepared and each cavity was conditioned with a 37% phosphoric acid for 15 sec, rinsed with water for 15 sec, and dried with compressed air. Bonding agent(Scotchbond Multipurpose, 3M Co.) was applied and a hybrid composite resin (Z-100, 3M Co.) was placed using an incremental technic. The excess cured composite resin was carefully removed with Sof-Lex discs(3M Co.) to expose the original margins of the cavity. The following seven groups were established : group 1 was not rebonded and used as control group ; group 2 was rebonded with a Scotchbond Multipurpose(3M Co.) and finished ; group 3 was rebonded with a Fortify(BISCO) and finished ; group 4 was rebonded with a Concise white sealant(3M Co.) and finished ; group 5 was rebonded with a Concise white sealant(3M Co.) and not finished ; group 6 was rebonded with a P&F sealant(BISCO) and finished; group 7 was rebonded with a P&F sealant(BISCO) and not finished. The specimens were then subjected to 500 thermocycles between 5 & 65 with a 10 see dwell time and immersed in 2% methylene blue dye solution for 24 hours and sectioned with low-speed diamond cutter into two part under water condition. The extent of microleakage at rebonded margins was evaluated microscopically and scored for dye penetration according to the following scale : 0=no dye penetration ; 1=dye penetration to half-way along axial wall between enamel surface and DEJ ; 2=dye penetration beyond halfway along axial wall between enamel surface and DEJ ; 3=dye penetration to the full depth of DEJ or beyond DEJ. Selected samples were prepared for SEM observation to determine the depth of penetration of the rebonding agent into the marginal interface. The obtained results were as follows: 1. In the group 2 and 3, which is rebonded with a Scotchbond Multipupose and Fortify, dye penetration score were decreased significantly than that of group 1 (P<0.05), but group 4 and 6 were not statistically different from group 1(P>0.05). 2. There were significant differences between group 4, 6 and group 5, 7 when compared by dye penetration score (P<0.05). 3. In the SEM observation, Scotchbond Multipurpose and Fortify were penetrated within $30-40{\mu}m$ depth of the outermost surface. However, both sealants were failed to penetrate into the debonded interface.

• 한국산학기술학회논문지
• /
• 제18권4호
• /
• pp.527-535
• /
• 2017

연료전지 배터리 하이브리드 UPS용 연료전지 파워 팩 내부에 설치한 연료전지의 화학반응에 의해 생성되는 열을 제거하는데 어려움이 있다. 열을 제거하지 못할 경우 연료전지의 내구성과 성능에 영향을 끼쳐 수명 단축의 원인이 된다. UPS용 연료전지 파워 팩 제작을 위하여 연료전지의 적절한 냉각 방법을 선정하고 제시하는 것이 본 연구의 목표이다. 냉각방법 선정을 위해 냉각 성능에 영향을 주는 각각의 설계 인자를 변화시키면서 연구를 수행하였다. 전산해석은 상용프로그램인 COMSOL Multiphysics로 수행하였다. 먼저 연료전지 스택의 냉각 팬의 위치를 상단과 하단에 배치했을 때 1 kW급 연료전지 스택 표면온도를 비교하였으며, 각각의 위치에 따른 냉각 팬의 회전속도를 2,500, 3,000, 3,500, 4,000 RPM으로 변경하여 적절한 냉각 팬의 속도를 결정하였다. 또한 파워 팩 외부에서 내부로 들어오는 공기의 입구인 그릴의 타공면적을 달리하여 내부로 들어오는 공기의 유량이 냉각에 미치는 영향을 비교하였다. 본 연구는 UPS용 연료전지 파워 팩 내부 연료전지의 열관리 기술개발에 효과적으로 활용될 수 있을 것으로 판단된다.

• 한국자원식물학회지
• /
• 제21권2호
• /
• pp.117-127
• /
• 2008

본 연구는 금원산 생태수목원 조성 부지의 관속식물상을 조사한 후 희귀 및 특산식물, 식물구계학적 특정식물종, 귀화식물 등을 분류함으로써, 생태수목원 조성을 위한 기초자료를 제공하고자 수행한 바 다음과 같은 결론을 도출하였다. 금원산 생태수목원 조성 부지의 관속식물상은 84과 217속 319종 43변종 7품종으로 총 369분류군이 확인되었다. 희귀식물은 구상나무(보존우선순위; 73번)와 산작약(97번)이 확인되었다. 특산식물은 개비자나무, 구상나무(식재), 지리대사초, 떡버들, 키버들, 할미밀망, 은꿩의다리, 털조록싸리, 네잎갈퀴나물, 노각나무, 큰고추나물, 오동(식재), 병꽃나무, 벌개미취(식재) 등 12과 14속 11종 3변종 1교잡종으로 총 15종류가 확인되었다. 식물구계학적 특정식물종은 V등급에 산작약, IV등급에는 확인되지 않았으며, III등급에 구상나무(식재), 중나리, 거제수나무, 물박달나무, 당느릅나무, 참조팝나무, 개벚지나무, 꽝꽝나무(식재), 노각나무, 개회나무, 선백미꽃, 털괴불나무, 병풍쌈 등 13종류, II등급에 처녀치마, 털괭이눈, 복자기, 민둥뫼제비꽃, 곽향등 5종류, I등급에 홍지네고사리, 개비자나무, 전나무(식재), 잣나무(식재), 큰천남성, 흰여로, 퉁둥굴레, 왕버들, 박달나무, 물오리나무, 굴참나무, 투구꽃, 금낭화, 애기괭이눈, 노랑물봉선, 대팻집나무, 피나무, 들메나무, 덩굴꽃마리 등 19종류로 정리되어 총 38종류가 확인되었다. 귀화식물에는 큰조아재비, 큰김의털, 오리새, 호밀풀, 애기수영, 돌소리쟁이, 아까시나무, 족제비싸리, 토끼풀, 달맞이꽃, 개망초, 봄망초, 미국가막사리, 원추천인국, 서양민들레 등 5과 13속 15종류가 확인되었으며, 귀화율은 전체 369종류의 관속식물 중 4.1%로 분석되었다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1991년도 춘계학술대회
• /
• pp.65-70
• /
• 1991

A hybrid model which uses a probabilistic model and a MLP(multi layer perceptron) model for pattern recognition of EMG(electromyogram) signals is proposed in this paper. MLP model has problems which do not guarantee global minima of error due to learning method and have different approximation grade to bayesian probabilities due to different amounts and quality of training data, the number of hidden layers and hidden nodes, etc. Especially in the case of new test data which exclude design samples, the latter problem produces quite different results. The error probability of probabilistic model is closely related to the estimation error of the parameters used in the model and fidelity of assumtion. Generally, it is impossible to introduce the bayesian classifier to the probabilistic model of EMG signals because of unknown priori probabilities and is estimated by MLE(maximum likelihood estimate). In this paper we propose the method which get the MAP(maximum a posteriori probability) in the probabilistic model by estimating the priori probability distribution which minimize the error probability using the MLP. This method minimize the error probability of the probabilistic model as long as the realization of the MLP is optimal and approximate the minimum of error probability of each class of both models selectively. Alocating the reference coordinate of EMG signal to the outside of the body make it easy to suit to the applications which it is difficult to define and seperate using internal body coordinate. Simulation results show the benefit of the proposed model compared to use the MLP and the probabilistic model seperately.

• Korean Chemical Engineering Research
• /
• 제51권2호
• /
• pp.171-180
• /
• 2013

금속유기구조체(metal-organic frameworks, MOF)는 넓은 비표면적, 규칙적인 구조 및 높게 분산된 금속 성분 등 뛰어난 물리화학적 특성으로 인해 활발한 연구가 이뤄지고 있는 다공성 물질이며, 특히 가스의 흡착, 분리 매체로서 뛰어난 성능이 보고되고 있다. MOF를 이용한 온실가스 이산화탄소의 흡착 연구는 상온 고압 영역에서 이산화탄소 저장 공정과 상온 저압 영역에서 이산화탄소 흡착 공정의 두 범주로 나눌 수 있으며, MOF의 넓은 비표면적 외에도 (1) MOF의 빈 배위결합 자리, (2) MOF의 기능화, (3) MOF의 상호 침투 효과, 및 (4) 이온 교환 효과를 이용한 연구 결과가 보고되고 있다. MOF 물질들은 비교적 낮은 수분 및 열에 대한 안정성이 문제로 제기되고 있으며, 제올라이트 유사 구조체(zeolitic imidazolate frameworks, ZIF) 또는 유기 골격 구조체(covalent organic frameworks, COF) 물질의 이산화탄소 흡착 특성이 거론되고 있다. 본 소고에서는 MOF를 이용한 이산화탄소 흡착에 대한 최근의 연구 결과를 본 연구실의 실험 결과를 중심으로 간략히 소개하고자 한다.

• Journal of Power Electronics
• /
• 제4권3호
• /
• pp.138-151
• /
• 2004

In this paper, a constant frequency phase shifting PWM-controlled voltage source full bridge-type series load resonant high-frequency inverter using the $4^{th}$ generation IGBT power modules is presented for innovative consumer electromagnetic induction heating applications, such as a hot water producer, steamer and super heated steamer. The bridge arm side link passive capacitive snubbers in parallel with each power semiconductor device and AC load side linked active edge inductive snubber-assisted series load resonant tank soft switching inverter with a constant frequency phase shifted PWM control scheme is evaluated and discussed on the basis of the simulation and experimental results. It is proved from a practical point of view that the series load resonant and edge resonant hybrid high-frequency inverter topology, what is called, DE class type, including the variable-power variable-frequency regulation function can expand zero voltage soft switching commutation area even under low output power setting ranges, which is more suitable and acceptable for newly developed induction heated dual pack fluid heaters. Furthermore, even the lower output power regulation mode of this high-frequency load resonant tank inverter circuit is verified so that this inverter can achieve ZVS with the aid of the single auxiliary inductor snubber.

• 한국해양환경ㆍ에너지학회지
• /
• 제18권4호
• /
• pp.291-297
• /
• 2015

10 MW급의 파력-해상풍력 복합발전 플랫폼 설치해역으로 고려되고 있는 차귀도 해역에서 측정된 파랑정보를 이용하여 파랑스펙트럼을 구하고, 이로부터 생성된 불규칙파에 따라 수직 운동하는 파력발전기에 Sheng et al.(2015)이 제안한 래칭 제어기법을 적용하였다. 래칭 시간을 정할 때 필요한 입사파의 주기로 불규칙파의 통계 대푯값인 피크 주기를 사용하였다. 래칭 제어기법을 불규칙파중 부이의 시간영역 해석에 적용한 결과, 약 50%의 추출파워의 증가를 가져왔다.

• BMB Reports
• /
• 제40권6호
• /
• pp.845-852
• /
• 2007

The highly evolved flowers of orchids have colorful sepals and fused columns that offer an opportunity to discover new genes involved in floral development in monocotyledon species. In this investigation, we cloned and characterized the homologous PISTALLATA-like (PI-like) gene PhPI15 ($\underline{Ph}alaenopsis$ $\underline{PI}$ STILLATA # $\underline{15}$), from the Phalaenopsis hybrid cultivar. The protein sequence encoded by PhPI15 contains a typical PI-motif. Its sequence also formed a subclade with other monocot PI-type genes in phylogenetic analysis. Southern analysis showed that PhPI15 was present in the Phalaenopsis orchid genome as a single copy. Furthermore, it was expressed in all the whorls of the Phalaenopsis flower, while no expression was detected in vegetative organs. The flowers of transgenic tobacco plants ectopically expressing PhPI15 showed male-sterile phenotypes. Thus, as a Class-B MADS-box gene, PhPI15 specifies floral organ identity in orchids.

• 컴퓨터교육학회논문지
• /
• 제4권1호
• /
• pp.43-52
• /
• 2001

본 연구의 목적은 정보통신윤리교육을 위한 네트웍 기반의 협력학습시스템(Netclass)을 개발하는 것이다. 이 시스템은 하이브리드형의 교육시스템이며, 분산 네트웍 환경, 독립적인 컴퓨팅 환경, 웹브라우저 환경이라는 3가지 학습모드를 제공한다. 협력학습 시스템을 제작하기 위하여, 다음과 같은 연구를 수행하였다. 첫째, 정보통신윤리교육과 관련 있는 딜레마 가운데 학습 컨텐츠를 선정하고, 둘째, 학습자간의 협력과 상호작용을 통하여 타인의 생각이나 감정 그리고 행동의 결과를 미리 예측하는 체계적인 과정을 의미하는 협력적 딜레마 해결 학습 모형을 설계하였다. 셋째, 표준구조 기반의 협력학습 시스템 모델을 제시하였으며, 넷째, 네트웍 컴포넌트, DB 컴포넌트, 인터페이스 컴포넌트와 같은 다수의 컴포넌트를 개발하였다.

• 대한간호학회지
• /
• 제29권3호
• /
• pp.467-484
• /
• 1999

The main objectives of this study were to investigate the concept of family function from the perspective of the contemporary Korean family, and to construct model of change of family function with chronic illness. The hybrid model approach was applied in which three phases(theoretical phase, empirical phase, and analytic phase) of concept development were explored for family functioning. The study was conducted from 1997 to 1998. In empirical phase, two groups of purposive samples were drawn : normal family group composed of six families without ill family member, and ill family group composed of seven families of which wives have rheumatoid arthritis. Only families with child(or children) in primary or secondary schools were included in the study. The results were as follows : In theoretical phase, six dimensions of family concept were emerged : affective, structural, control, cognitive, financial, and reproductive dimension. In order to analyse the Korean normal family function in middle class with middle-aged women, financial and reproductive dimension were not included. In empirical phase, five dimensions(affective, structural, control, cognitive, and external relationship) were found from the normal family data. External relationship dimension is very important factor as a resource of the support, especially when their parents or siblings had no help or support to them. In the affective dimension, Korean family emphasized harmony and balance rather than affective expression between couples and between parents and children. They also showed common goals of the families to solve their problems to control the family members. The priority of the goals was getting into the higher education of their children or helping their unhealthy parents or family members. Six dimensions (affective, structural, control, cognitive, external relationship, and financial) of family functions were emerged from the ill family data. From the analysis of ill family data, types of restructuring house chore after wives illness were developed : (a) negociated, (b) accomodated, and (c) isolated, enduring types. Although the dimensions of family functioning identified in this study are similar to the conceptualizations that exist in the western literature, there were distinct differences in the nature of major themes and subconcepts under these family function dimensions.