• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7B
• /
• pp.573-582
• /
• 2006

In this paper, we propose a hybrid two-stage AWG-based WDM-PON architecture in order to overcome the limitations of the existing PONs and single AWG-based WDM-PONs as well as to accomodate the new services and the expandability of network. The proposed architecture employs two-stage AWG for downstream transmission and single AWG and combiners for upstream one at RN. It also employs the separated fiber with multi-wavelength for both direction. It leads to high scalability, low cost, and high capacity for transmission. In downstream transmission, the transparency can be guaranteed since the traffic is transmitted to ONU through each channel. However, several ONUs share the channel for upstream one by using WDM/TDMA scheme because the asymmetrical feature of networks is considered. The performance of the proposed one is evaluated and compared with other architectures in terms of cost, network capacity and up/downstream bandwidth.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11B
• /
• pp.1394-1402
• /
• 2011

This paper describes solar light collecting system which employs parabolic reflector and Fresnel lens and its industrial application. We have introduced second-stage optical system so that it makes optical fiber overcome its numerical aperture limitation and also it makes focused light become collimated, which results in decreased light energy density. As result of these, light collecting efficiency become maximized and the system does not require separate cooling apparatus any more. The developed solar lighting system together with artificial light source like LED has been applied to plant factory as a hybrid lighting source. This makes us save electric energy for artificial lighting during day time. The intensity of LED light in the hybrid lighting system is controlled automatically according to ambient-light-sensor installed in the system so that the light intensity for a plant always keeps the same level no matter how the sun light changes. For a plant factory whose size is 330 square meters, when solar lighting system is applied, 28,080KWh electric energy can be saved per month.2 times.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.683-686
• /
• 2004

In recent years, the supercapacitor and hybrid capacitor have related with substitutional energy source focused of many scientists because of their usage in power sources for electric vehicles, computers and other electric devices. The storage energy of electrical charge is based on electrostatic interactions in the electric double layer at the electrode/electrolyte interface, resulting in high rate capability and long cycle performance compared with batteries based on Faradaic electrode reactions. So we have been considered to carbon nanofibers as the ideal material for supercapacitors due to their high utilization of specific surface area, good conductivity, chemical stability and other advantages. In this work, we aimed to find out that the capacitance have increased because of electrochemical capacitance to provide by carbon nanofibers. Also carbon nanofibers based on chemical method and water treatment have been resulted larger capacitances and also exhibit better electrochemical behaviors about 15% than before of nontreated state. And also optical observations with treated and nontrteated carbon nanofibers discussed by the TEM, SEM, EDX, BET works and specific surface area analyzer. Their results also focused on the surface area of electrode and electrical capacitance was also improved by the effect of surface treatments.

• Composites Research
• /
• v.16 no.2
• /
• pp.33-40
• /
• 2003

In order to overcome one of the most pronounced shortcomings of conventional laminated composites, such as the low damage tolerance due to delamination, the thermoplastic materials and 3D (three-dimensional) preforms have been utilized in the manufacture of composite materials. From the newly developed process termed as the co-braiding, hybrid yarns of the thermoplastic fibers (PEEK) and reinforcing fibers (carbon) have been fabricated. In order to further enhance the delamination suppression, through thickness fibers have been introduced by way of 3D weaving technique in the fabrication of textile preforms. The preforms have been thermoformed to make composite materials. Complete impregnation of the PEEK into the carbon fiber bundles has been confirmed. For the comparison of mechanical performance of 3D woven composites, quasi-isotropic laminates using APC-2/AS4 tapes have been fabricated. Tensile and compressive properties of both the composites have been determined. Furthermore. the open hole, impact and CAI(Compression After Impact) tests were also carried out to assess the applicability of 3D woven textile reinforced thermoplastic composites in aerospace structures.

• Smart Structures and Systems
• /
• v.26 no.4
• /
• pp.403-418
• /
• 2020

In recent years, the use of Fiber Reinforced Polymers (FRPs) as one of the most common ways to increase the strength of concrete samples, has been introduced. Evaluation of the final strength of these specimens is performed with different experimental methods. In this research, due to the variety of models, the low accuracy and impact of different parameters, the use of new intelligence methods is considered. Therefore, using artificial intelligent-based models, a new solution for evaluating the bond strength of FRP is presented in this paper. 150 experimental samples were collected from previous studies, and then two new hybrid models of Imperialist Competitive Algorithm (ICA)-Artificial Neural Network (ANN) and Artificial Bee Colony (ABC)-ANN were developed. These models were evaluated using different performance indices and then, a comparison was made between the developed models. The results showed that the ICA-ANN model's ability to predict the bond strength of FRP is higher than the ABC-ANN model. Finally, to demonstrate the capabilities of this new model, a comparison was made between the five experimental models and the results were presented for all data. This comparison showed that the new model could offer better performance. It is concluded that the proposed hybrid models can be utilized in the field of this study as a suitable substitute for empirical models.

• Applied Chemistry for Engineering
• /
• v.25 no.4
• /
• pp.352-356
• /
• 2014

PDMS modified epoxy resin with epoxy group (EMPDMS) was prepared from the reaction of ${\alpha},{\omega}$-aminopropylpolydimethylsiloxane and diglycidyl ether of bisphenol-A (DGEBA) based epoxy resin, and PDMS modified epoxy hybrid compound (EMPDMSH) was prepared by introducing alkylesteraminopropyl alkoxy silane to EMPDMS. Their structures were characterized using FT-IR, $^1H$-NMR and $^{29}Si$-NMR. Coating materials were prepared by mixing EMPDMSH base and solvent. Physical properties of the coating materials coated on epoxy/glass fiber composite film were measured according to the content of PDMS in EMPDMSH. Contact angle of coating film was increased 30 to 71 degree. Adhesive property of coating film was 5B degree better then epoxy or acrylate coating materials, and surface roughness was decreased as increasing in EMPDMSH.

• Polymer(Korea)
• /
• v.27 no.1
• /
• pp.69-74
• /
• 2003

In this study, we have investigated the adsorption properties for nitrate ion in ground water using mixed resin type hybrid ion exchange (HIXF) and fiber type ion exchanger. Their swelling ratio (4.45 g/g) and ion exchange capacities (2.45 meq/g) were higer than the swelling ratio of IEC and IXF. Adsorption yield increased for nitrate $NO_3^-$ and sulfate $SO_4^{2-}$ ions were optimal at the concentration ratios of nitrate and sulfate below 1.0 and the adsorption yields were 100% and 20%, respectively. On the other hand it was shown that the degree of adsorpted for nitrate to pH 3, but it was little changed in the other pH range. We found that the selective adsorption capacity for nitrate was the optimal the mixing ratios of resin and fibrous ion exchanger of below 0.5.

• The Korea Journal of Herbology
• /
• v.34 no.5
• /
• pp.1-12
• /
• 2019

Objectives : The consumption of licorice is large in Korea, but domestic production is insufficient due to the lack of adaptability. This study aimed to provide a morphological basis for adding interspecific hybrid licorice with improved adaptability to pharmacopoeia. Methods : This study was to establish identification criteria for the original plants, external and internal morphology of the authentic herbal medicines (Glycyrrhiza uralensis, G. glabra and G. inflata), market products and artificially interspecific hybrid forms of licorice. For this purpose, previous studies were investigated and visual and histological observations were carried out. We focused on the internal morphology by microscopic observation for securing objectivity. Finally, we proposed the identification keys for precise classification of each part. Results : 1) Original plant : Licorice species in the compendium were distinguished by the number of leaflets, presence of hair on the fruit, curvature and swelling of the fruit. 2) External morphology : Licorice species were distinguished by degree of powderiness, tearing gap, radial structure in the cross section and existence of protrusion of outer epidermis. 3) Internal morphology : Licorice species were distinguished by the degree of development of phloem fiber bundle, development of obliterated sieve, whether the secondary medullary ray are branched. In the case of interspecific hybrids, the characteristics of both species used for hybridization were mixed in all observation methods. Conclusions : These results suggest that the interspecific crossbred licorice is suitable for the pharmacopoeial standard. Therefore, it can be applied as a herbal medicine through additional supplementary study.

• Journal of Animal Environmental Science
• /
• v.12 no.1
• /
• pp.35-40
• /
• 2006

This experiment was conducted to investigate the effect of application level of swine slurry on the growth characteristics and yield of sorghum$\times$sudangrass hybrid and $NO_3-N$ content in infiltration at experimental field of Grassland and Forage Crops Division, National Livestock Research Institute, RDA from 2000 to 2002. Treatments were consisted of non fertilizer(NF), chemical fertilizer(CF), 100% swine slurry(SS 100), 150% swine slurry(SS 150), 200% swine slurry(SS 200) and 100% swine slurry + CF 50%(SS100 + CF 50) with randomized complete block design and three replications. Growth of sorghum$\times$sudangrass hybrid was not nearly different among the treatments, but early growth of swine slurry treatments was better than that of CF, and regrowth after 1st cutting was shown better in CF and SS 100+CF 50 with adding application of chemical fertilizer. The sugar content(brix %) was tends to be increased with swine slurry application. Dry matter(DM) yields of SS 100 and SS 150 were lower 15 and 6% than that of CF, respectively, and SS 200 was similer to CF, but there was not found significant difference among all treatments. The content of crude protein(CP), acid detergent fiber(ADF), and neutral detergent fiber(NDF) did not show the difference. The content of $NO_3-N$ in infiltration water was not more than CF by the 55 150 application, but more than by SS 200 and 55 100+CF 50 treatment.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.32 no.3
• /
• pp.309-316
• /
• 2012

This study was performed to investigate the effects of forage cropping system and cattle slurry on productivity of whole crop rice, whole crop barley and Sorghum-Sudangrass hybrid and environmental pollution in paddy land. Forage cropping system used in this study was consisted of double-cropping whole crop barley followed by whole crop rice applied with cattle slurry (DWBRC) and double-cropping whole crop barley followed by Sorghum-Sudangrass hybrid applied with cattle slurry (DSSBC). The field experiments were conducted on the clay loam at Backsanmyun, Kimje, Chunlabukdo province in Korea for three years (May 2006 to Apr. 2009). This study was arranged in completely randomized design with three replicates. The field had been sown with whole crop rice 'Nampyung', Sorghum-Sudangrass hybrid 'Sordan79' and whole crop barley 'Younyang'. The yields of whole crop barley in DWBRC and DSSBC were 7,515 kg/ha and 8,515 kg/ha, respectively. The yields of whole crop barley in DSSBC significantly increased as compared with that of DWBRC (p<0.05). The contents of crude protein, neutral detergent fiber (NDF), acid detergent fiber (ADF), total digestible nutrient (TDN) of whole crop barley in DWBRC were not difference as compared with those of DSSBC. The pH, and contents of total nitrogen and organic matter in soil samples collected at the end of the experiment increased as compared with those at the beginning of the experiment (p<0.05). However, The content of phosphate in DWBRC was no difference as compared with DSSBC. In addition, after the end of experiment, the concentrations of exchangeable cations (Ca, Na, Mg and K) in soil samples collected at the end of the experiment were remarkably higher than those at the beginning of the experiment (p<0.05). The concentrations of $NH_4$-N, $NO_3$-N, $PO_4$-P, Cl, Ca, K, Mg and Na in leaching water were hardly influenced by the cropping system and application of cattle slurry.