• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제34권5호
• /
• pp.299-310
• /
• 2012

Purpose: The purpose of this study was to evaluate the histological healing process of 3 different types of xenogenic tooth bone graft material and xenogenic bone graft material. Methods: Three types of human tooth bone graft material (chips, crowns, and roots) and BioOss (Geistlich Pharma AG, Wolhausen, Switzerland) was filled at the preformed 4 round-shaped calvarial bone defects of beagle dogs. The beagles were sacrificed at 2, 4, 8, and 12 weeks, respectively, for radiological and histological evaluation. Results: Increased strength and radiopacity were detected in all graft material groups in time-dependent manner. New bone was formed and matured surrounding the graft material histologically. Also, a new bone was directly integrated with graft material. Conclusion: It was expected that newly developed tooth bone graft material would show good bone healing capacity if it was used as a graft material for the restoration of bony defect.

• 구강회복응용과학지
• /
• 제25권2호
• /
• pp.191-200
• /
• 2009

줄기세포는 미분화 상태의 세포로 지속적인 자가 분열능과 특정 세포로 분화 할 수 있는 분화능을 지니고 있으며 이러한 특성으로 말미암아 난치병의 새로운 장을 열 것이라는 기대감을 얻고 있다. 즉, 세포이식 후 특정 세포로 분화 유도를 시켜 기존의 치료 방법으로는 치료가 되지 않았던 많은 의학적 난제들을 풀 수 있는 열쇠인 것이다. 치아는 평생에 걸쳐 발거되는 조직으로 치아줄기세포는 얻기가 비교적 쉬워서 다른 성체줄기세포들보다 더 높이 평가되고 있다. 과잉치는 전 세계 다양한 인종에서 발견되는 중요한 임상적 질환이다. 과잉치의 유병율은 관련 연구 보고서마다 다양하나 소아치과 의사들의 경우 임상에서 자주 과잉치를 발거하고 있다. 그러나, 현재까지 진행된 줄기세포 관련 연구들을 살펴보면 과잉치의 줄기세포에 관한 보고는 없으며, 이는 줄기세포로 이용 가능한 중요한 자원을 파기하고 있는 것은 아닌지 의문이 생긴다. 그러므로 본 연구는 과잉치에 포함된 세포가 줄기세포의 특징을 가지고 있는지를 밝혀내기 위해 진행되었다.

• 대한치과교정학회지
• /
• 제38권5호
• /
• pp.337-346
• /
• 2008

교정치료 본질인 치아이동을 보다 효과적으로 하기 위한 기계적 힘외의 다른 자극원으로서 전기적 자극에 대한 효용성이 부각되고 있다. 본 연구는 임상에서 초소형 전기장치에 의한 전기 자극이 교정적 치아이동에 미치는 효과를 실증하기 위해 시행되었다. 교정용 미니 스크류를 식립한 성인 여성 교정 환자 7명의 상악 견치 후방 견인 시 실험측에 150 gm의 기계적 교정력 외에 $20{\mu}A$의 직류 전류를 공급하는 초소형 전기 장치를 고안, 제작, 장착하여 견치의 근원심에 1일 5시간씩 4주간 전류 자극을 흘리고, 대조측에는 기계적 자극만을 가한 후, 매 주간 치아 이동량을 측정하여 치아이동에 있어서 전기자극의 효과를 검증하였다. 실험기간 동안 치아이동률에 있어서 실험군에서 대조군에 비해 1, 2째주에서 33%, 3, 4째주에서 21,4% 증가된 치아이동을 보였다. 실험군의 평균 치아 이동량은 1, 2째주가 3, 4째주에 비하여 컸으며, 그 차이는 각각 47%, 24% 증가된 치아 이동량을 보였다. 실험을 통하여 미세 전류가 적용되어 치아이동을 촉진할 수 있다는 것이 임상적으로 실증되었다. 생물학적으로 최적의 치아이동을 계획하여 치료계획을 단축시킬 수 있는 방법은 기계적 교정력과 전기자극을 동시에 가하는 것이라고 제안한다.

• Restorative Dentistry and Endodontics
• /
• 제27권1호
• /
• pp.16-23
• /
• 2002

Physical properties of composite resins such as strength, resistance to wear, discoloration, etc depend on the degree of conversion of the resin components. The purpose of this study was to evaluate the degree of conversion of the composite resins according to the thickness of tooth structure penetrated by light and applied light curing time. The coronal portions of extracted human teeth (one anterior tooth, three posterior tooth) was embedded by pink denture material. the mounted teeth were cut into three illumination sections (1mm thickness enamel section, 1mm thickness dentin section, 2mm thicknes dentin section) and one backing section with cutting wheel. Thin resin films were made by using 6kg pressure between slide glass during 5 minutes Thin resin film was light cured on coupled illumination section during 40sec, 80sec and 120sec. each illumination section was coupled as follows; no tooth structure(X), ename section(E), enamel section + 1mm dentin section(ED1), enamel section + 2mm dentin section(ED2), enamel section + 1mm dentin section + 2mm dentin section(EDD). To simulate the clinical situation more closely, thin resin films was cured against a backing section of tooth structure. The degree of conversion of carbon double bonds to single bonds in the resin films were examined by means of Fourier Transform Infrared Spectrometer. The results were obtained as follows ; 1 As curing time was increased, conversion rate was increased and as tooth thickness which was penetrated by curing light was increased, conversion rate was decreased. 2. At all tooth thickness groups, conversion rate between 80sec and 120sec was not significantly increased(P＞0.05). 3. At 40sec group and 80sec, conversion rate between no tooth structure(X) group and 1mm enamel section(E) group was not significantly decreased(P＞0.05). 4. At 80sec group and 120sec, conversion rate between 1mm enamel section(E) group and 1mm enamel section + 1mm dentin section(ED1) group was not significantly decreased(P＞0.05).

• The Journal of Advanced Prosthodontics
• /
• 제9권2호
• /
• pp.85-92
• /
• 2017

PURPOSE. The aim of this study was to evaluate the effect of tooth surface pre-treatment steps on shear bond strength, which is essential for understanding the adhesive cementation process. MATERIALS AND METHODS. Shear bond strengths of different cements with various tooth surface treatments (none, etching, priming, or etching and priming) on enamel and dentin of human teeth were measured using the Swiss shear test design. Three adhesives (Permaflo DC, Panavia F 2.0, and Panavia V5) and one self-adhesive cement (Panavia SA plus) were included in this study. The interface of the cement and the tooth surface with the different pre-treatments was analyzed using SEM. pH values of the cements and primers were measured. RESULTS. The highest bond strength values for all cements were achieved with etching and primer on enamel ($25.6{\pm}5.3-32.3{\pm}10.4MPa$). On dentin, etching and priming produced the highest bond strength values for all cements ($8.6{\pm}2.9-11.7{\pm}3.5MPa$) except for Panavia V5, which achieved significantly higher bond strengths when pre-treated with primer only ($15.3{\pm}4.1MPa$). Shear bond strength values were correlated with the micro-retentive surface topography of enamel and the tag length on dentin except for Panavia V5, which revealed the highest bond strength with primer application only without etching, resulting in short but sturdy tags. CONCLUSION. The highest bond strength can be achieved for Panavia F 2.0, Permaflo DC, and Panavia SA plus when the tooth substrate is previously etched and the respective primer is applied. The new cement Panavia V5 displayed low technique-sensitivity and attained significantly higher adhesion of all tested cements to dentin when only primer was applied.

• International Journal of Oral Biology
• /
• 제41권4호
• /
• pp.243-251
• /
• 2016

This study was undertaken to achieve a high bleaching efficacy with plasma, through longer application and reparative bleaching processes, by different shade evaluation methods. Extracted human teeth were divided into 6 groups (n=10). All teeth were treated in pairs. Low concentration of 15% carbamide peroxide (CP) was applied, with and without plasma, for 10, 20, and 30-min tooth bleaching, respectively. The bleaching procedure was repeated once daily for four days. The teeth were maintained in a moist environment provided by artificial saliva. The Vitapan Classical shade guide and Commission Internationale de L'Eclairage (CIELAB) color system were collectively used to measure the bleaching efficacy. Color evaluation was statistically analyzed using Student t-test and one-way analysis of variance (ANOVA) complemented by Tukey's test. Combining the plasma with 15% CP showed significantly greater color changes compared to bleaching without plasma (p<0.05). A high bleaching efficacy with plasma is proportional to the repetitive application and the treatment time. A 30-min application with plasma provided the best bleaching. Repetitive bleaching showed lower probability of color relapse of the bleached tooth. The color change by shade guide correlated with the changes in CIELAB color system. A value of 1 color change units (CCU) conversion factor for overall color change (${\Delta}E$) values comparisons was 3.724 values. The two measuring methods provide a more accurate correspondence of color change. The repetitive and longer application for tooth bleaching, combined with plasma, has a strong bleaching effect and produces whiter teeth.

• The Journal of Advanced Prosthodontics
• /
• 제4권3호
• /
• pp.127-133
• /
• 2012

PURPOSE. Many dentists use desensitizing agents to prevent hypersensitivity. This study compared and evaluated the effect of two desensitizing agents on the retention of cast crowns when cemented with various luting agents. MATERIALS AND METHODS. Ninety freshly extracted human molars were prepared with flat occlusal surface, 6 degree taper and approximately 4 mm axial length. The prepared specimens were divided into 3 groups and each group is further divided into 3 subgroups. Desensitizing agents used were GC Tooth Mousse and $GLUMA^{(R)}$ desensitizer. Cementing agents used were zinc phosphate, glass ionomer and resin modified glass ionomer cement. Individual crowns with loop were made from base metal alloy. Desensitizing agents were applied before cementation of crowns except for control group. Under tensional force the crowns were removed using an automated universal testing machine. Statistical analysis included one-way ANOVA followed by Turkey-Kramer post hoc test at a preset alpha of 0.05. RESULTS. Resin modified glass ionomer cement exhibited the highest retentive strength and all dentin treatments resulted in significantly different retentive values (In Kg.): GLUMA ($49.02{\pm}3.32$) > Control ($48.61{\pm}3.54$) > Tooth mousse ($48.34{\pm}2.94$). Retentive strength for glass ionomer cement were GLUMA ($41.14{\pm}2.42$) > Tooth mousse ($40.32{\pm}3.89$) > Control ($39.09{\pm}2.80$). For zinc phosphate cement the retentive strength were lowest GLUMA ($27.92{\pm}3.20$) > Control ($27.69{\pm}3.39$) > Tooth mousse ($25.27{\pm}4.60$). CONCLUSION. The use of $GLUMA^{(R)}$ desensitizer has no effect on crown retention. GC Tooth Mousse does not affect the retentive ability of glass ionomer and resin modified glass ionomer cement, but it decreases the retentive ability of zinc phosphate cement.

• 대한치과교정학회지
• /
• 제44권2호
• /
• pp.96-102
• /
• 2014

Objective: A recent study suggested that rs6504340, a polymorphism within the homeobox B (HOXB) gene cluster, is associated with the susceptibility for malocclusions in Europeans. The resulting malocclusions require orthodontic treatment. The aim of this study was to investigate the association of rs6504340 and other dentition-implicated polymorphisms with dental and occlusal traits in Korean and Japanese populations. Methods: The study participants included 223 unrelated Koreans from the Busan area and 256 unrelated Japanese individuals from the Tokyo metropolitan area. DNA samples were extracted from saliva specimens. Genotyping for rs6504340 and four single nucleotide polymorphisms (SNPs) that have been shown to be associated with the timing of first tooth eruption and the number of teeth at 1 year of age (rs10506525, rs1956529, rs9674544, and rs8079702) was performed using TaqMan assays. The Index of Orthodontic Treatment Need (IOTN), overjet, overbite, arch length discrepancy, crown sizes, and length and width of the dental arches were measured. Spearman's correlation coefficients were calculated to evaluate relationships between rs6504340 and these dental/occlusal traits. Results: We evaluated the aesthetic components and dental health components of the IOTN in the Korean and Japanese populations and found that neither rs6504340 nor the other four SNPs showed any association with dental and occlusal traits in these East Asian populations. Conclusions: These negative results suggest that further research is needed to identify the genetic determinants of malocclusions in order to reach a consensus.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2007년도 The 1st International Symposium on Advanced Magnetic Materials
• /
• pp.98.1-98.1
• /
• 2007

• Journal of Periodontal and Implant Science
• /
• 제14권1호
• /
• pp.77.2-77.2
• /
• 1984