• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.3
• /
• pp.72-78
• /
• 2016

In this study, we analyzed the accidental hydrogen embrittlement affecting the track nut on a self-propelled howitzer. Tracks are key components to maintain a high degree of confidence in the operation of the self-propelled howitzer and the safety of the crew. This study analyzed the fractured surface using SEM to review accidental damage of the wedge nut. In addition, we conducted revival tests and analyzed the results to identify the cause of the wedge nut damage from hydrogen embrittlement. We should carry out factor analysis and continuous improvement of the manufacturing process to determine the accidental breakage mechanism for future enhancement of the self-propelled howitzer. This study will be the useful reference for enhancing process designs in similar products.

• Journal of Power System Engineering
• /
• v.18 no.5
• /
• pp.144-149
• /
• 2014

The silencer of 155mm caliber howitzer is developed to reduce its firing loud noise. This kind of research of a large gun was seldom because its big firing noise does not make significant effect even if to use silencer. Nowadays, military facilities became closely located civilian residential area. The noise would be regarded environmental pollution. So the noise reducing research becomes reconsidered. The previous silencer researches were only dealt with small guns as pistols and rifles moreover their theories was not properly analyzed for a large caliber silencer. The reason was previous researches of a large caliber silencer as 155mm howitzer were limited because their data based on simulation results without actual test by using computational fluid dynamics. In this study, the entire processes of silencer of 155mm caliber howitzer which were design, manufacturing, actual firing test, and analysis of its theories, were performed and showed. In particular, the actual noise of with silencer and without was measured and the results were compared to analyze the effect of silencer.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.25 no.4
• /
• pp.364-371
• /
• 2022

Surface state change of ammunition generated during the storage period increases the surface roughness and this affects the flight of ammunition, but there are no research results quantitatively indicating this. In this study, the drag force for each Mach number of howitzer shells was calculated through CFD to which the surface data of the howitzer shell was applied, and analysis of trajectory was performed using drag force values as an input of the 4th Runge-Kutta method, and the degree of decrease of the maximum range caused by the surface roughness of the howitzer shell was estimated. As a result, it was confirmed that the maximum range of howitzer shell with high surface roughness was 1.12 % shorter than that of howitzer shell without roughness. It was confirmed that the effect of surface roughness on the trajectory is not negligible.

• Journal of Environmental Impact Assessment
• /
• v.16 no.6
• /
• pp.495-502
• /
• 2007

In Korea, military authorities have neglected to consider impacts of military projects on local communities and natural environment. Moreover, local communities have had difficulties in dealing with the Ministry of National Defense (MND), which was stubborn enough not to implement environmental assessment on their projects. In this situation, recent case, "EIA of Baekgol Division's Howitzer Fire Training Site" in the Supreme Court-in which judges upheld the Higher Court's decision that the division violated the Environmental Impact Assessment law by ignoring to implement EIA-reveals that military projects can no longer forgo environmental assessment. The decision has serious ramifications on the future of Environmental Impact Assessment in military-led projects. This paper examines the proper scope of EIA in military-led projects and, more specifically, fire training site and searches for how to improve it through 'probable error,' a military training method that is applied to real 'howitzer' fire training. Probable error of the artillery field manual is nothing more than an error that exceeded as often as it is not exceeded and its scientific method was demonstrated through real fire tests in the US. Army. If it is applied to improve assessment methods about the proper scope of EIA in military 'howitzer' fire training site, 'probable error' will improve effect prediction, mitigation and reliability.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.04a
• /
• pp.558-563
• /
• 2014

To reduce the transmission of large gun-generated noise from the firing test range to the community, we have tested a silencer to be used with howitzer(155mm KM114A2) after simulation. Numerical analysis was conducted by using a commercial CFD code, FLUENT. To analyze complex blast flow fields, the Spalart-Allmaras model was applied under 2 dimensional and axisymmetric conditions. Firing tests were also performed with the KM114A2 howitzer while the silencer was installed. This paper describes a result of comparison between results of computer analysis and test outcomes which were gotten by firing 155mm projectiles at the testing range. This paper will also be informative to the muffler design which will be adapted to 155mm large gun in the future.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.25 no.6
• /
• pp.553-560
• /
• 2022

This study investigates improvement of torsional strength of special wrench for K-series self-propelled howitzer power-pack maintenance. In order to maintain the power-pack, special wrench is one of the essential tools for assembling/disassemblimg the engine and transmission. However, failures(plastic deformation, fracture phenomenon and etc.) have been frequently reported even though special wrench was used within recommended standard torque range. Therefore, in this study, finite element analysis using ABAQUS was performed and modification of design parameters have been proposed. Prototypes based on the proposed parameters were manufactured and torsional experiment(torque about 130 % of recommend maximum torque) validated the newly proposed design parameters. Special wrench based on this study is applied to mass production and currently used for the maintenance.

• Journal of the military operations research society of Korea
• /
• v.31 no.2
• /
• pp.75-85
• /
• 2005

Even though K-series combat equipment's engine depot maintenance cycle of ROK army is 10years In average, that of the K-9 Self Propelled(SP) howitzer which has been fielded since 99 $3{\sim}4$years causing limitations to effective equipment operations and combat-readiness. Therefore, the current K-9 self-propelled howitzer engine operation period of 1,500 hours, which is greatly shorter than other equipments, had to be verified. In order to find the optimum depot maintenance cycle, related field operation conditions were verified and opinions were collected, and also the background on current depot maintenance cycle setting was studied.

• Journal of Korean Institute of Industrial Engineers
• /
• v.42 no.2
• /
• pp.122-128
• /
• 2016

The purpose of this study is to improve the firing elevation driving method for towed howitzer to prevent the musculoskeletal disorders. To adjust the firing elevation, it is required to rotate the hand wheel and this work has been done manually in the firing test range as the same method as field artillery troops. In the firing test range, the motor-driven firing elevation adjustment device was developed to improve the working efficiency and safety. These were compared by using posture classification scheme of RULA and REBA. It was measured elapsed time to investigate the improved operational efficiency. The optimal posture of upper body to operate the hand wheel for field artillery troops was proposed.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.11
• /
• pp.139-147
• /
• 2016

This study described the design scheme for each step of the production test for the Fire Control System(FCS) of the K-55A1 PIP business of Hanwha Thales since 2011. From the time of receipt of the product It is necessary to improve the FCS's reliability by using the Unit Test, burn-In test, System Test. FCS of K-55A1 acts as a 'head' that control the self-propelled howitzer, and connected with the electrical and physical connection of self-propelled howitzer's multiple unit (Inertial navigation systems(IN), Muzzle Velocity Radar (MVR)) for the normal operation without an inch of error in operating. We designed the production testing equipment automatically as much as possible and designed with the environment similar to the self-propelled howitzer. by using this production testing equipment, It should help for the strengthen national defense of the Republic of Korea.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.231-232
• /
• 2002

Various methods that utilize erosion rate measurement of standard cannon, 155mm Howitzer M185, as reference, are being used to calculate erosion rate of an interested unknown cannon tubes. We know ten measured erosion values of the standard cannon from 391 rounds to 4.000. An approximate function fitting these value s is derived. The new erosion equation is also suggested and computer simulations arc presented.