DOI QR코드

DOI QR Code

A Study on the Design and Testing of 155mm Howitzer Silencer

155mm 화포의 소음기 설계 및 시험평가에 관한 연구

  • 여철모 (현대위아 주식회사) ;
  • 박성호 (국방과학연구소 종합시험본부) ;
  • 이해석 (국방과학연구소 종합시험본부) ;
  • 김영섭 (현대위아 주식회사) ;
  • 정한식 (경상대학교 에너지기계공학과) ;
  • 정효민 (경상대학교 에너지기계공학과)
  • Received : 2014.07.23
  • Accepted : 2014.09.10
  • Published : 2014.10.31

Abstract

The silencer of 155mm caliber howitzer is developed to reduce its firing loud noise. This kind of research of a large gun was seldom because its big firing noise does not make significant effect even if to use silencer. Nowadays, military facilities became closely located civilian residential area. The noise would be regarded environmental pollution. So the noise reducing research becomes reconsidered. The previous silencer researches were only dealt with small guns as pistols and rifles moreover their theories was not properly analyzed for a large caliber silencer. The reason was previous researches of a large caliber silencer as 155mm howitzer were limited because their data based on simulation results without actual test by using computational fluid dynamics. In this study, the entire processes of silencer of 155mm caliber howitzer which were design, manufacturing, actual firing test, and analysis of its theories, were performed and showed. In particular, the actual noise of with silencer and without was measured and the results were compared to analyze the effect of silencer.

Keywords

References

  1. G. Klingenberg and J. M. Heimerl, 2004, "Gun Muzzle Blast and Flash", Progress in Astronautics and Aeronautics.
  2. D. L. Cler, N. Chevaugen, M. S. Shepherty J. E. Flaherty and J. Remacle, 2003, "Computational Fluid Dynamics Application To Gun Muzzle Blast- A validation Case Study", Technical Report ARCCB- TR-03011, Jean- Francois Remacle.
  3. H. Rehman, S. H. Hwang, B. Fajar, H. S. Chung and H. M. Jeong, 2011, "Analysis and attenuation of impulsive sound pressure in large caliber weapon during muzzle blast", Journal of Mechanical Science and Technology, Vol. 25, No. 10, pp. 2601-2606. https://doi.org/10.1007/s12206-011-0731-2
  4. Y. H. Yu, 2007, "A Study on the Development of a Resonator to Reduce the Ship Engine Room Noise", Journal of The Korean Society for Power System Engineering, Vol. 11, No. 4, pp. 72-77.
  5. G. J. Hokenson, 1998, "Evaluation of an Add-on Muzzle Exhaust Flow Manipulator for Noise Suppression on Large Caliber Guns", DA196-601.

Cited by

  1. 화포 내부 압력의 자동 측정시스템 개발 vol.22, pp.2, 2021, https://doi.org/10.5762/kais.2021.22.2.766