• 자원환경지질
• /
• 제27권3호
• /
• pp.281-287
• /
• 1994

이 논문은 transverse 이방성(異方性) 매질내 Love 채널파동 수치해석에 관한 연구를 요약한 것이다. 먼저, 이를 위하여 상기한 매질내 SH파동방정식으로부터 2차 근사 양(陽)유한차분식을 유도하였다. 이 유한차분식은 매 격자점마다 상이한 물성을 정해줄 수 있기 때문에, 복잡한 모델구조를 추가로, 내부 경계조건 처리를 함이 없이, 매우 효율적으로 해석할 수 있을 것이다. 등방성(等方性) 석탄층에 대한 해석결과, 본 연구에서 작성한 탄성파기록이 기존의 Korn and $St{\ddot{o}}ckl$의 것과 본질적으로 동일함을 확인하였다. 다음, 이방성(異方性) 석탄층에 대한 해석에서는, Love 채널파동의 군(群)속도가 석탄층의 수평방향 속도의 증감에 따라 증감됨을 알 수 있었다. 그러나 현재의 연구단계에선, Love 채널파동을 이용하여 저(低) 속도층의 조성(組成), 층서(層序), 균열등에 관한 정보를 이끌어 낼 수는 없었다. 이러한 정보는 석유탐사 및 개발의 측면에서 중요하기 때문에, 앞으로 이와 관련된 채널파동 연구가 기대된다.

• Journal of Communications and Networks
• /
• 제5권2호
• /
• pp.116-123
• /
• 2003

In this paper, we address the problem of designing multirate codes for a multiple-input and multiple-output (MIMO) system by restricting the receiver to be a successive decoding and interference cancellation type, when each of the antennas is encoded independently. Furthermore, it is assumed that the receiver knows the instantaneous fading channel states but the transmitter does not have access to them. It is well known that, in theory, minimummean- square error (MMSE) based successive decoding of multiple access (in multi-user communications) and MIMO channels achieves the total channel capacity. However, for this scheme to perform optimally, the optimal rates of each antenna (per-antenna rates) must be known at the transmitter. We show that the optimal per-antenna rates at the transmitter can be estimated using only the statistical characteristics of the MIMO channel in time-varying Rayleigh MIMO channel environments. Based on the results, multirate codes are designed using punctured turbo codes for a horizontal codedMIMOsystem. Simulation results show performances within about one to two dBs of MIMO channel capacity.

• 한국기계가공학회지
• /
• 제20권1호
• /
• pp.48-56
• /
• 2021

In this study, the heat transfer process around the finned channel tubes is numerically examined. Serially arranged tubes of an evaporator were used for heat exchange. The numerical analysis results confirmed that the vortex generated at the rear of the channel pipe was caused by the fin. Furthermore, it was also confirmed that the temperature difference was large between the inlet and outlet ends of the fin. The temperature of the location where the fin was attached to the channel pipe was found to be close to the surface temperature of the channel wall. However, the temperature rose rapidly closer to the ambient air temperature of 350 K towards the fin end, located at a distance of 0.035 m; it was found to have a significant influence on the heat transfer around the fin-attached channel tube. The wider the vertical flow path, the lower the total heat transfer coefficient. However, the overall heat transfer coefficient increased as the horizontal flow path narrowed. The increment is attributed to an increase in the heat transfer amount due to increased heat transfer surface.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2003년도 하계학술대회 논문집
• /
• pp.26-26
• /
• 2003

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권2호
• /
• pp.244-251
• /
• 2009

Porous media have especially large surface area per volume, which contain complex fluid passage. If porous media can be applied to cool a CPU or an electronic device with large heat dissipation, it could result in heat transfer enhancement due to the enlargement of the heat transfer area and the flow disturbance. This study is aimed to identify the heat transfer and pressure drop characteristics of high-porosity metal foams in a horizontal channel. Experiment is performed with the various heat flux, velocity and pore density conditions. Permeabilities, which is deduced from Non-Darcy flow model, become lower with increasing pore density. Nusselt number also decreases with higher pore density. High pore density with same porosity case shows higher pressure loss due to the increase of surface area per unit volume. The fiction factor decreases rapidly with increase of Reynolds number in Darcy flow region. However, it converges to a constant value of the Ergun coefficient in Non-Darcy flow region.

• 대한기계학회논문집B
• /
• 제23권5호
• /
• pp.637-645
• /
• 1999

Horizontal two-phase flow pressure drop within rectangular channels with small gap heights have been examined experimentally. The gap heights range from 0.4mm to 4mm corresponding to aspect ratios(the channel height divided by the width) from 0.02 to 0.2. Water and air were used as the test fluids with the superficial velocity ranges being 0.03-2.39m/s and 0.05-18.7m/s, respectively. The experimental results In rectangular channels were compared with the Lockhart-Martinelli correlation, which are widely used for conventional round tube. The Lockhart-Martinelli correlation turned out to be Inappropriate to represent the present experimental data. In this respect, considering the aspect ratio and gap-height effects, an empirical correlation on two-phase flow pressure drop was proposed. The proposed correlation successfully covers the bubbly, plug, slug and annular flow regimes.

• 대한전자공학회논문지
• /
• 제25권5호
• /
• pp.572-579
• /
• 1988

In this paper, a system of automatic placement and routing for gate array layout design is proposed. In the placement stage, the circuit is partitioned and using the concept of min-cut slicing, and each partitioned module is placed, so that the routing density over the entire chip be uniformized and the total wiring length be minimized. In the global routing stage, the concept of the probabilistic routing density is introduced to unify the wiring congestions in each channel. In the detailed routing stage, the multi-terminal nets are partitioned into the two-terminal nets. The ordered channel graph is proposed which implies the vertical and the horizontal constranint graphs simultaneously. And using the ordered channel graph, the proposed routing algorithm assigns the signal nets to the tracks. Also the proposed placement and routing algorithms are implimented on IBM/PC-AT to construct PC-level gate array layout system.

• Journal of the Optical Society of Korea
• /
• 제7권4호
• /
• pp.269-274
• /
• 2003

In this paper, a Gaussian apodization technique applied to a transmission volume hologram for holographic demultiplexer is proposed. The Gaussian apodized grating of 15 mm ${\times}$ 11mm size, $38{\mu}m$ thickness and 3.2 mm horizontal standard deviation of the Gaussian index modulation profile was fabricated. A 22-channel demultiplexer based on that grating has been optically demonstrated. The channel spacing, the interchannel cross-talk level and the channel uniformity of 0.8 nm, -30 dB and 1.5 dB, respectively, were obtained.

• 전자공학회논문지A
• /
• 제29A권10호
• /
• pp.49-56
• /
• 1992

A new global routing algorithm which dynamically adjusts its cost parameters depending on the given routing poroblem to find a near optimum solution has been developed. The proposed algorithm efficiently performs global routing on general area in which all the pin positions are given. This algorithm is composed of two phases`In the first phase, it routes each net by searching a minimum cost path while ignoring the channel capacity. In the second iterative phase, it rips up nets which pass the channel at which the horizontal or vertical routing density exceeds the capacity and then it reroutes them using a modified set of cost parameters. Applying the above phases, paths for nets are found such that routing density doesn't exceed the capacity in each channel and that nets are routed with minimum cost. Experimental results for several benchmark examples including difficult-4, difficult-8, difficult-16, Primary1 and Primary2 show that our method generates better results than other published ones.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.487-490
• /
• 2002

The real chip and similarity model were used to investigate the thermal behavior and velocity distribution of air from the heat source with the location and the amount of heat experimentally and numerically, and compared. The heat generated in the block is not cooled by convection and show the high temperature by the stagnation of heat flow. After maintaining the high temperature of block by the natural convection, the sudden drop of temperature with the air flow was shown in the channel but the decreasing rate was small with the time. The inward block was effected by infinitesimal air flow generated between block and channel and outward block was effected by the entry condition.