• 제목/요약/키워드: Homogeneous coefficient

검색결과 217건 처리시간 0.022초

라인강 유량의 추계학적 수문분석에 관한 연구 (네덜란드의 Lobith지점을 중심으로) (The Stochastic Hydrological Analysis for the Discharge of River Rhine at Lobith (For River Rhine at Lobith in the Netherlands))

  • 최예환
    • 한국농공학회지
    • /
    • 제23권4호
    • /
    • pp.46-52
    • /
    • 1981
  • The aim at this study has the stochastic hydrological analysis for the annual mean discharge and monthly discharge which were observed at Lobith of River Rhine in the Netherlands from 1901 to 1972. After this study was analysed by computer IBM 370 and Hewlett Parkard 9800, the results were as follows; 1.When 72 data was divided into two groups of subsample data as 36 data, they do not have their properties to be non-homogeneous and inconsistent due to F-test and t-test. 2.The credit limits of the serial correlation coefficient was fluctuated $\pm$0. 231 which was shown in Fig. 3. at significant level 99% by Anderson's test. 3.The correlogram at short term was shown to be no short-term persistence as Fig. 3. 4.Since the correlogram at long term has displayed that Hurst's coefficient was 0.6144 between 0.6 and 0.7, it was to be no long-term persistence. 5.The stochastic model with annual discharge of this River Rhine was shown with $\chi$t=2195+483. 8 $\varepsilon$t as $\chi$t=$\mu$+oet and $\varepsilon$t=$_1$ø$\varepsilon$t-$_1$+ζt where t=1,2,3,..., ζt is an independent series with mean zero and variance (1-ø2), $\varepsilon$t is the dependent series, and 4' is the parameter of the model. 6.The serial correlation coefficient of monthly discharge was explained as $\chi$$_1$ = 0.34 . sin(6-$\pi$t+$\pi$) as Fig.4. and the River Rhine has no large fluctuation and smoothly changed during that time.

  • PDF

세 물체 간 마찰 완전 접촉 문제의 응력 특이성 거동 (Stress Singularity Behaviour in the Frictional Complete Contact Problem of Three Bodies)

  • 김형규
    • Tribology and Lubricants
    • /
    • 제35권4호
    • /
    • pp.229-236
    • /
    • 2019
  • This study investigates the stress singularity that occurs at the contact edge of three bodies in a frictional complete contact. We use the asymptotic analysis method, wherein we constitute an eigenvalue problem and observe the eigenvalue behavior, which we use to obtain the order of the stress singularity. For the present geometry of three bodies in contact, a contact between a cracked indenter and half plane is considered. This is a typical geometry of the PCMI problem of a nuclear fuel rod. Thus, this paper, specifically presents the characteristics of the PCMI problem from the perspective of stress singularity. Consequently, it is noted that the behavior of the stress singularity varies with the difference in the crack angle, coefficient of friction, and material dissimilarity, as is observed in a frictional complete contact of two bodies. In addition, we find that the stress singularity changes essentially linearly with respect to the coefficient of friction, regardless of the variation in the crack angle and material dissimilarity. Concurrently, we find the order of singularity to be 0.5 at a certain coefficient of friction, irrespective of the crack angle, which we also observe in the crack problem of a homogeneous and isotropic body. The order of singularity can also exceed 0.5 in the frictional complete contact problem of three bodies. This implies that the propensity for failure when three bodies are in frictional complete contact can be even worse than that in case of a failure induced by a crack.

HOMOGENEOUS SOLUTION FOR SW LACERTAE

  • Kim, Kyung-Joo;Kang, Young-Woon
    • Journal of Astronomy and Space Sciences
    • /
    • 제13권1호
    • /
    • pp.19-31
    • /
    • 1996
  • We have analyzed collected photoelectric light curves for light variations of SW Lac. The method of Fourier analysis was adopted to quantify the light variation from season to season. We found the linear relation between the Fourier coefficient, B1 and the magnitude difference between two maxima. The total light of the system has been decreased as much as 0m.04 during approxiamately 20 years time interval. Photoelectric parameters including spot parameters for all light curves were obtained by the method of the Wilson and Devinney differential correction in order to secure the variations of parameters from season to season. SW Lac, not like RS CVn type stars, required to adjust all parameters as well as spot parameters for a reasonable fit to the observations of each epoch. A surface temperature of cooler star is one of the most sensitive parameters to affect a shape of light curve of SW Lac. We conclude that the shape of light curve of SW Lac varies even during one season as well as season to season. The light curve is mainly caused by inhomogeneous surface temperature due to strong chromospheric activity of the system.

  • PDF

Complexity Reduction of an Adaptive Loop Filter Based on Local Homogeneity

  • Li, Xiang;Ahn, Yongjo;Sim, Donggyu
    • IEIE Transactions on Smart Processing and Computing
    • /
    • 제6권2호
    • /
    • pp.93-101
    • /
    • 2017
  • This paper proposes an algorithm for adaptive loop filter (ALF) complexity reduction in the decoding process. In the original ALF algorithm, filtering for I frames is performed in the frame unit, and thus, all of the pixels in a frame are filtered if the current frame is an I frame. The proposed algorithm is designed on top of the local gradient calculation. On both the encoder side and the decoder side, homogeneous areas are checked and skipped in the filtering process, and the filter coefficient calculation is only performed in the inhomogeneous areas. The proposed algorithm is implemented in Joint Exploration Model (JEM) version 3.0 future video coding reference software. The proposed algorithm is applied for frame-level filtering and intra configuration. Compared with the JEM 3.0 anchor, the proposed algorithm has 0.31%, 0.76% and 0.73% bit rate loss for luma (Y) and chroma (U and V), respectively, with about an 8% decrease in decoding time.

유체로 채워진 보어홀 속의 파이프 종진동에 있어서 방사손실에 의한 감쇠 (Damping due to Radiation Loss for Axial Vibration of the Pipe in a Fluid-filled Borehole)

  • 이현엽;류황진
    • 소음진동
    • /
    • 제7권4호
    • /
    • pp.631-636
    • /
    • 1997
  • A method to estimate the radiatio power to the surrounding formation due to axial vibration of the pipe in a fluid-filled borehole has been developed, by using the propagation modes of stress wave in an infinitely-long and uniform drilling borehole surrounded by a radially-infinite homogeneous formation. Also, the equivalent damping coefficient for the axial vibration of the pipe has been derived. As an example, results for a real drilling borehole has been presented. The analysis of the elastic motion of the infinite formation which has cylidrical cavity is simplified with the geometric axisymmetry and the low-frequency assumption so that the analytic solution is obtained.

  • PDF

Time Series Simulation of Explosive Charges In Shallow Water Using Ray Approach

  • Hahn, Jooyoung;Lee, Seongwook;Na, Jungyul
    • The Journal of the Acoustical Society of Korea
    • /
    • 제22권3E호
    • /
    • pp.133-140
    • /
    • 2003
  • A time series simulation is presented by a ray approach for the simulating the received waveform of a broadband acoustical signals interacting with the ocean boundaries. The environment is assumed to be horizontally stratified, and the seafloor is described in terms of homogeneous fluid half-space. The ray approach includes the effects of reflection from the air-water, water-sediment interface and phase shifts due to boundaries interaction. To generate time series, we assume that the acoustic energy propagates from source to receiver along eigenrays and represent the action of the bottom on the incident wave by a linear filter and characterized in the frequency domain by the transfer function. As example application, the time series for an explosive source in a shallow water environment is calculated and analyzed in terms of acoustical process. good agreement with measured time series is demonstrated.

다공질매체내의 유체유동 특성에 관한 연구 (A Study on the Liquid Flow Characteristics in Layer Porous Media)

  • 이충구;황춘복
    • 설비공학논문집
    • /
    • 제5권4호
    • /
    • pp.243-248
    • /
    • 1993
  • In this research, unsteady groundwater flow in unconfined and homogeneous three layer aquifers is studied theoretically and experimentally. Numerical solutions are obtained by Runge Kutta and Runge Kutta Gill method after transforming the governing nonlinear partial differential equations to nonlinear ordinary differential equations. Experimental apparatus includes a test section filled with fine, medium and coarse sands. Experimental results are compared with the numerical solutions and both experimental and numerical results correspond well with each other. This numerical approach may be also applied to the cases which have more aquifers.

  • PDF

Non-homogeneous Linear Differential Equations with Solutions of Finite Order

  • Belaidi, Benharrat
    • Kyungpook Mathematical Journal
    • /
    • 제45권1호
    • /
    • pp.105-114
    • /
    • 2005
  • In this paper we investigate the growth of finite order solutions of the differential equation $f^{(k)}\;+\;A_{k-1}(Z)f^{(k-l)}\;+\;{\cdots}\;+\;A_1(z)f^{\prime}\;+\;A_0(z)f\;=\;F(z)$, where $A_0(z),\;{\cdots}\;,\;A_{k-1}(Z)\;and\;F(z)\;{\neq}\;0$ are entire functions. We find conditions on the coefficients which will guarantees the existence of an asymptotic value for a transcendental entire solution of finite order and its derivatives. We also estimate the lower bounds of order of solutions if one of the coefficient is dominant in the sense that has larger order than any other coefficients.

  • PDF

강제교반법으로 제조된 Al-Pb계 베어링 합금의 마모특성 (Wear properties of Al-Pb alloys produced by a forced stirring method)

  • 임화영;허무영;임대순
    • Tribology and Lubricants
    • /
    • 제8권1호
    • /
    • pp.70-77
    • /
    • 1992
  • Al-Pb-Si bearing alloys were produced by a forced stirring method and a rapid solidification process to study wear properties of bearing alloys. A homogeneous distribution of Pb particles in Al matrix could be obtained by means of the forced stirring and the rapid cooling during the casting. The wear properties of bearing alloys were tested by a pin-on-disc wear tester. The change in microstructure according to the alloy manufacturing variables was observed by the backscattered electron images. Al-Pb and Al-Si binary alloys showed a transition from mild to severe wear. The transition was not found in Al-Pb-Si ternary alloys. It could be concluded that the lubricatioin effect of Pb and the strengthening effect of Si in the ternary alloys enhanced the bearing properties. A Al-25%Pb-13%Si alloy showed the lowest coefficient of friction in this experiment. It indicated that the optimum concentration of alloy was 25% Pb and 13% Si when the forced stirring of melt and water-cooled-copper-mold solidification were adopted.

단일 모드 광섬유 표면의 비정질 Chalcogenide 열 증착 (Thermal Evaporation of Amorphous Chalcogenide on Single-mode Optical Fiber)

  • 황성태;조규만;강봉훈;주기태
    • 한국세라믹학회지
    • /
    • 제47권2호
    • /
    • pp.142-145
    • /
    • 2010
  • We made a film of a few ${\mu}m$ thickness by evaporating $As_2S_3$ piece to perpendicularly cut optical fiber by thermal evaporation process. Linear refractive index(n) and linear absorption coefficient(k) of amorphous $As_2S_3$ are 2.525 and $1.727{\times}10^{-3}$, respectively. A surface roughness did not exceed 2 nm and a transmission spectrum showed that the sample of thermal evaporation was homogeneous.