• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.952-960
• /
• 2009

Foundation soils are greatly influenced on the stability of structures. The soft clay deposited in Incheon Port area is named either nomally consolidated clay or unconsolidated clay. New harbor structures will be constructed in Incheon Port area. Not sufficient soil boring datum are obtained from the filed soil exploration due to limited time and cost. The harbor construct site is pretty large area and the soils are not homogenous. This paper presented the result of reliability analysis which was performed by both Bayesian approach and analysis of variance.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.731-733
• /
• 1988

This paper describes a design of hardware system for real time automatic diagnosis of ECG arrhythmia based on pipeline processor consisting of the three microcomputer. ECG data is acquisited by 12 bit A/D converter with hardware QRS triggered detector. Four diagnostic parameters - heart rate, morphology, axis, and ST segment - are used for the classification and the diagnosis of arrhythmia. The functions of the main CPU were distributed and processed with three microcomputers. There-fore the effective data process and the real time process using microcomputer can be obtained. The interconnection structure consisting of two common memory units is designed to decrease the delay time caused by data transfer between processors and by which the delay time can be taken 1 % of one clock period.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.2071-2074
• /
• 2002

This paper introduces an encoder design method of Turbo TCM (Trellis Coded Modulation) with symbol puncturing. TTCM consists of two simple trellis codes in parallel and modulator. To obtain an good encoder, we calculate the free distance by the assumption that the punctured symbol is transmitted from the subset that consist of signals with the same systematic bit at random. We develop a search program to find the component encoder which maximize the free distance. Especially, for 8-PSK with code rate 2/3, we search for the component codes. We find a new encoder which has better BER performance than that of Robertson′s encoder. We verify the results through the simulation."

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.33-38
• /
• 2008

A ground-loop heat exchanger in a ground source heat pump system is an important unit that determines the thermal performance of a system and its initial cost. The Size and performance of this heat exchanger is highly dependent on ground thermal properties. A proper design requires certain site-specific parameters, most importantly the ground effective thermal conductivity, the borehole thermal resistance and the undisturbed ground temperature. This study was performed to investigate the effect of some parameters such as borehole lengths, various grouting materials and U-tube configurations on ground effective thermal conductivity. In this study, thermal response tests were conducted using a testing device with 9-different ground-loop heat exchangers. From the experimental results, the length of ground-loop heat exchanger affects to the effective thermal conductivity. Among the various grouting materials, the bentonite-based grout with silica sand shows the largest thermal conductivity value.

• Journal of Industrial Technology
• /
• v.18
• /
• pp.379-384
• /
• 1998

Conventional short-term load forecasting techniques have limitation in their use on holidays due to dissimilar load behaviors of holidays and insufficiency of pattern data. Thus, a new short-term load forecasting method for special days in anomalous load conditions is proposed in this paper. The proposed method uses two Artificial Neural Networks(ANN); one is for the estimation of load curve, and the other is for the estimation of minimum and maximum value of load. The forecasting procedure is as follows. First, the normalized load curve is estimated by ANN. At next step, minimum and maximum values of load in a special day are estimated by another ANN. Finally, the estimate of load in a whole special day is obtained by combining these two outputs of ANNs. The proposed method shows a good performance, and it may be effectively applied to the practical situations.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.687-689
• /
• 2003

Recently, issues regarding environment and the diversification of dependence in oil are watched with keen interest. Wind power attracts most interest because of its high-energy efficiency with environment friendly functions. The paper discusses the development of a coreless axial-flux permanent magnet (AFPM) generator for a wind power system. Analyzed the Coreless AFPM generator by electromagnetic, and designed wind power generator with this. The 3 phase output of stator is rectified and fed to a common do link. The overall machine structure has high compactness and lightness, because of the lack of the iron core. The test results with a resistive load confirm the satisfactory operation of generator. Compared with conventional generator, the design has lower weight, lower Power loss and improved efficiency.

• Journal of Sensor Science and Technology
• /
• v.20 no.4
• /
• pp.254-259
• /
• 2011

In this paper, a current stimulator circuit with adaptive supply regulator for retinal prosthesis is proposed. In current stimulation systems, the stimulating circuits with wide voltage swing range are needed due to the high impedance of the retina cell and microelectrodes. Thus, previous researches adopt the high voltage architecture to obtain the enough operating range. The high voltage architecture, however, could increase the power consumption and can damage the retina cells. The proposed circuit provides the adaptively regulated supply voltage by measuring the difference between desired stimulation current and the actual stimulation current. The proposed circuit can achieve the extended range of the allowable cell impedance, improved accuracy of the stimulation current, and higher biosafety.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.551-555
• /
• 2008

In these days, compressed file is useful in internet environment and has many advantages. So a lot of data hiding algorithms works on JPEG compressed file. Of course they know basic rules of transformation and quantization and they utilize those rules to implement their programming. But most of them evaluate the affection of data hiding after data modification. We propose how to predict the affection of data modification in course of data hiding process. Through some kind of experiments, several valuable facts are revealed which used in data hiding in compressed domain such as JPEG. These facts will improve existing data hiding algorithms (F3, F4 and F5 which including Matrix Encoding)[1],[5],[6].

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.170-171
• /
• 2005

Generally when Power MOSFET is operated, a heat sink is attached to it to emit heat caused by the operation. As the surface area of a heat sink is smaller, the thermal impedance is larger, which causes a negative influence on the characteristics of the chips and the devices and shortens the lifespan of them. In this experiment, we've compared and analysed different effects of heat sinks with 5 different surface areas on the characteristics of Thermal Transient when they are applied respectively.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.1
• /
• pp.67-76
• /
• 2013

We present an innovative real-time laser welding monitoring technique employing the correlation analysis of the plasma plume optical emission generated during the process. The plasma optical radiation emitted during Nd:YAG laser welding of S45C steel samples has detected with a Photodiode and analyzed under different process conditions. The discrete DC voltage difference, filter methods and wavelet transform has been used to decompose the optical signal into various discrete series of sequences over different frequency bands. Considering that wavelet analysis can decompose the optical signals, extract the characteristic information of the signals and define the defects location accurately, it can be used to implement process-control of laser welding.