• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.431-432
• /
• 2014

Recently, the demand of LED(light-emitting diode) lighting is gradually enlarged by governmental saveenergy policy, which the LED lighting has been established compulsorily in new buildings, public institutions, and residential installations etc.. The LED lighting is driven by SMPS (switching mode power supply). The SMPS requires high efficiency because the SMPS changes a commercial ac power source to low voltage dc power source. Harmonic components that occur in the conversion process of SMPS decrease system power factor and deal great damage in electric power system. To improve such problems, this paper proposes a SMPS of high efficiency. The switching devices in the proposed SMPS are operated by soft switching technique using a new quasi-resonant circuit. The input ac current waveform in the proposed SMPS becomes a quasi-sinusoidal waveform proportional to the magnitude of input ac voltage under constant switching frequency. As a result, the proposed SMPS obtains low switching power loss and high efficiency, and its input power factor is nearly in unity.

• 한국산업융합학회 논문집
• /
• 제22권3호
• /
• pp.365-371
• /
• 2019

Recently, the demonstration and research on the power transmission using high voltage DC such as HVDC(High Voltage DC), Smart Grid, DC transmission and distribution have been actively conducted. In order to control the power converter in high-voltage DC power transmission system, SMPS(Switching Modulation Power Supply) for power converter control using high-voltage DC input is essential. However, the demand for high-pressure SMPS is still low, so the development is not enough. In the low-output SMPS using the high-voltage input, it is difficult to achieve high efficiency due to the switching transient loss especially at light load. In this paper, we propose a new switching scheme for high power SMPS control for low output power. The proposed method can provide better efficiency increase effect in the light load region compared to the existing PWM method. To verify the feasibility of the proposed method, a 40 W SMPS for HVDC MMC(Modulation Multi-level Converter) was designed and verified by simulation.

• 한국전기전자재료학회논문지
• /
• 제17권5호
• /
• pp.502-507
• /
• 2004

The forward planar transformer, which had power capacity of 300 W, input voltage of 220 V, output voltage of 15 V, and switching frequency of 300 KHz, was designed and manufactured by using the planar core with large effective area and the flat copper leadframes for miniaturization and high efficiency of the switching mode power supply (SMPS). As well as, a forward converter equipped with the above mentioned planar transformer was manufactured and electromagnetic characteristics were investigated. The numerical value of turns for 1st and 2nd winding were 15 and 2 respectively The self inductance of 1st winding was 1.592 mH, very low leakage inductance of 2.7 $\mu$H, and the coupling factor of 0.928 were obtained at switching frequency of 300 KHz. The high efficiency of 88.62 % for the SMPS equipped with planar transformer was obtained at power capacity of 300 W.

• 전자공학회논문지
• /
• 제50권11호
• /
• pp.70-77
• /
• 2013

본 논문에서는 새로운 기법의 PWM 발생기를 이용한 저면적, 고효율 SMPS를 제안한다. 제안된 회로에서 PWM의 duty ratio는 pseudo relaxation-oscillation technique를 이용한 PWM 발생기의 내부 커패시터 전압 기울기를 제어하는 방식으로 결정된다. 기존의 SMPS들에 비해, 제안된 제어 방식은 loop bandwidth 보상을 위해 기존의 아날로그 제어방식의 SMPS에서 요구되는 필터회로나 디지털 제어방식의 SMPS에서 요구되는 디지털 compensator가 필요 없기 때문에 단순한 구조로 구성된다. 또한, 제안된 회로는 PWM 발생기의 내부 캐패시터 용량 변화를 통해 1MHz~10MHz까지 스위칭 주파수를 사용자가 선택할 수 있다. 시뮬레이션 수행결과 제안된 SMPS는 10MHz 스위칭 주파수를 선택했을 때 내부회로에서 소모되는 전류는 최대 2.7mA, 파워 Trail을 제외한 전체 시스템의 전류 소모는 15mA였다. 또한, 제안된 SMPS는 시뮬레이션으로 3.3V출력에서 9mV의 최대 리플 전압이 발생하였다. 본 논문에서는 동부하이텍 BCD $0.35{\mu}m$ 공정 파라미터를 이용한 시뮬레이션 및 칩 테스트를 통해 제안된 회로를 검증하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 방전 플라즈마 유기절연재료 초전도 자성체연구회
• /
• pp.19-22
• /
• 2004

The resonant planar transformer, which had power capacity of 300 W, input voltage of 220 V, output voltage of 15 V, and switching frequency of 500 kHz, was designed and manufactured by using the planar core with large effective area and the flat copper lead frames for miniaturization and high efficiency of the switching mode power supply (SMPS). As well as, a resonant converter equipped with the above mentioned planar transformer was manufactured and electromagnetic characteristics were investigated. The numerical value of turns for 1st and 2nd winding were 12 and 2 respectively. The self inductance of 1st winding was 33.2 ${\mu}H$, very low leakage inductance of 1.27 ${\mu}H$, and the coupling factor of 0.98 were obtained at switching frequency of 300 kHz. The high efficiency of 88.21 % for the SMPS equipped with planar transformer was obtained at power capacity of 300 W.

• KEPCO Journal on Electric Power and Energy
• /
• 제2권4호
• /
• pp.577-582
• /
• 2016

최근 급속한 녹색환경 정책으로 LED를 이용한 조명 광원들이 설치 운용하고 있으나, 이들 광원의 전원 공급은 안정된 직류 전원 공급을 위해서 스위칭 모드 전원 공급(SMPS) 장치로 전원을 공급하고 있다. 그러나, 이들 전원 공급 장치는 공급 단가 때문에 설계 및 설치과정에서 스위칭에 따른 전력과 변환역률, 전기적 노이즈 및 돌입전류들은 간과하고 있다. 따라서, 본 연구에서는 SMPS는 고품질의 전원을 LED 조명 부하에 공급하기 위하여 스위칭 시에 다음과 같은 3가지 관점에서 회로를 연구하였다. 첫 번째, 역률과 효율을 약 85% 확보하고, 두 번째, 노이즈(고조파 포함) 최소화, 세 번째는 스위치-온 시 3A 돌입전류를 $100{\mu}sec$ 후 최소 0.3 A로 감소하여 돌입 전류 침입을 최소화 하고자 하였다. 본 연구에서는 IC형 구동기(LNK 409)를 적용하여 입력전압과 출력상황을 귀환 형태로 감시하도록 하였으며, 정전류 출력을 위하여 정전압을 유지할 수 있는 제어회로와 시상수를 개발하였다. 그러나, 부하 변동 시 미세한 전류의 불규칙으로 인한 발열 문제는 해결하지 못하고 있다. 이를 증명하고자 LED 조명 부하 46 W급을 대상으로 효과를 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 연구회 합동 학술발표회 논문집
• /
• pp.60-63
• /
• 1998

The widely used power supply (Switched Mode Power Supply : SMPS) as a source in order to stabilize direct current for electronics or communication systems has merits, when it is compared to the existing source for stability, such as high efficiency, small size, light weight by means of switching process of the semiconductor device which controls the flow of power. However, due to existence of inductors and capacitors used for charging energy, the source part in electronic or communication systems hasn't reached the speed, that is supposed to get, for achieving smaller size and lighter weight. In order to get smallness in size, it is necessary to increase switching frequency. And that makes devices for measuring energy smaller. Nevertheless, the rise switching frequency brings increases in switching loss, inductor loss, and power loss. Also, the occurrence of surge and noise caused by high frequency switching is getting higher. The resonant converter has been considered as one of methods that give solutions for the problems of SMPS and that method have been paid attention as a source technology in electronics and communication.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.520-524
• /
• 2001

Recently, the demand of large capacity SMPS for industrial area is increasing. Full-bridge dc-dc converter with IGBT is most widely used for large capacity SMPS because IGBT has a low-conduction loss and large current capacity, But most large capacity Full-bridge do-dc converter using IGBT has low operating frequency because of switching loss at IGBT especially at turn-off by current tail and it's cause of relatively big converter size. MOSFET has low switching losses has been widely used for high frequency SMPS but it has a problem to apply to large capacity SMPS because it has large conduction resistance causing large on-time losses. In this paper, for reduction losses at switching device, MOSFET is applied at parallel with IGBT in full-bridge dc/dc converter.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 전력전자학술대회
• /
• pp.89-91
• /
• 2019

본 논문에서 넓은 입력 범위에 대응 가능한 고효율 SMPS의 구조를 제안한다. 무부하 동작 안정성과 안정적인 기동을 위한 파워 시퀸스 및 제어 기법 또한 제안하고, 제안 SMPS를 제작, 실험한 결과를 발효한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.131-133
• /
• 2006

A high efficiency half bridge converter for PDP in whole operation load range is proposed in this paper. The ZVS(Zero Voltage Switching) in whole load range and high efficiency in low load range is achieved because the proposed converter is switched by fixed frequency asymmetrical duty ratio and resonant operation.