• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.1
• /
• pp.66-75
• /
• 2002

For the theoretical performance analysis of Viterbi Decoder for wireless LAN with data rate 12Mbps, code rate 1/2 and constraint length 7 defined in IEEE 802.11a, the transfer function is derived using Cramer's rule and the first-event error probability and bit error probability is derived under the AWGN. In the design process, input symbol is quantized into 16 steps for 4 bit soft decision and register exchange method instead of memory method is proposed for trace back, which enables the majority at the final decision stage. In the implementation, the Viterbi decoder based on parallel architecture with pipelined scheme for processing 12Mbps high speed data rate and AWGN generator are implemented using FPGA chips. And then its performance is verified in real time.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.7
• /
• pp.413-420
• /
• 2006

The speed of present-day network technology exceeds a gigabit and is developing rapidly. When using TCP/IP in these high-speed networks, a high load is incurred in processing TCP/IP protocol in a host CPU. To solve this problem, research has been carried out into TCP/IP Offload Engine (TOE). The TOE processes TCP/IP on a network adapter instead of using a host CPU; this reduces the processing burden on the host CPU. In this paper, we developed two software-based TOEs. One is the TOE implementation using an embedded Linux. The other is the TOE implementation using Lightweight TCP/IP (lwIP). The TOE using an embedded Linux did not have the bandwidth more than 62Mbps. To overcome the poor performance of the TOE using an embedded Linux, we ported the lwIP to the embedded system and enhanced the lwIP for the high performance. We eliminated the memory copy overhead of the lwIP. We added a delayed ACK and a TCP Segmentation Offload (TSO) features to the lwIP and modified the default parameters of the lwIP for large data transfer. With the aid of these modifications, the TOE using the modified lwIP shows a bandwidth of 194 Mbps.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.2
• /
• pp.335-343
• /
• 2024

Real-time target signal processing techniques for FMCW LiDAR are described in this paper. FMCW LiDAR is gaining attention as the next-generation LiDAR for self-driving cars because of its detection robustness even in adverse environmental conditions such as rain, snow and fog etc. in addition to its long range measurement capability. The hardware architecture which is required for high-speed data acquisition, data transfer, and parallel signal processing for frequency-domain signal processing is described in this article. Fourier transformation of the acquired time-domain signal is implemented on FPGA in real time. The paper also details the C-FAR algorithm for ensuring robust target detection from the transformed target spectrum. This paper elaborates on enhancing frequency measurement resolution from the target spectrum and converting them into range and velocity data. The 3D image was generated and displayed using the 2D scanner position and target distance data. Real-time target signal processing and high-resolution image acquisition capability of FMCW LiDAR by using the proposed parallel signal processing algorithms based on FPGA architecture are verified in this paper.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.5 s.37
• /
• pp.123-132
• /
• 2005

In this Paper, we present an improvement of switch node for wavelength multiplex optical network. Currently because of quick increase of internet traffic a big network capacity is demanded. Wavelength multiplex optical network Provides the data transfer of high speed and the transparent characteristic of the data. Therefore optic network configuration is the most powerful technology in the future. It will be able to control the massive traffic from the optical network in order to transmit the multimedia information of very many quantify. Consequently the node where the traffic control is Possible, is demanded. The optical switch node which manages efficiently the multiple wavelength was Proposed. This switch is composed of a optical switch module for switching and a wavelength converter module for wavelength conversion. It will be able to compose the switch fabric without optical/electro or electro/optical conversion using optical MEMS(Micro Electro Mechanical Switches) module. Finally, we present the good test result regarding the operational qualify of the switch fabric and the performance of optical signal from the switch node. The proposed switch node of the optic network will be able to control the massive traffic with all optical.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.6B
• /
• pp.1113-1122
• /
• 1999

In this paper, we propose MSS(Multicast Synchronization Server) and QCS(QoS Conversion Server) models that can support IP multicast and QoS(Quality of Service) over the ATM network more efficiently. In the MSS model, it is possible to establish shortcut VCs(Virtual Circuits) among all hosts in the ATM network and to transfer multicast data at high speed. Also the MSS model is more scalable, because the number of inter-cluster VCs needed in the MSS model is less than that of EARTH. In the QCS model, ATM switch is modified to support one QoS service and best effort service through the one point-to-multipoint VC at the same time so required network resources are reduced, and dedicated server is used for QoS conversion to accept heterogeneous receivers more efficiently. In this Paper, the proposed MSS model and QCS model have solved both efficiency problem and scalability problem. It is proved through the comparison of the VCs required in each model.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.4341-4348
• /
• 2012

This paper presents a web-based real-time monitoring system for a photobioreactor using an WiFi wireless network. An WiFi interface can support high speed data transfer, up to 11Mbps and it can be compatible with commercial wireless LAN environment. Thus, the proposed cell culture based on WiFi network can be easily applied to the reconfigurable system and real-time monitoring system. In this paper, we integrate the commercial WiFi module to the various bio-sensors and sensor control board to configure the wireless network. After we evaluate application S/W for monitoring the environment within incubator, we verify the proposed sensor networks for a cell culture system and its monitoring system. This result can be applicable for various bio-applications that require the network configuration and real-time monitoring system.

• 한국ITS학회:학술대회논문집
• /
• v.2007 no.10
• /
• pp.225-229
• /
• 2007

Recently, wireless sensor networks are deployed in various applications range from simple environment monitoring systems to complex systems, which generate large amount of information, like motion monitoring, military, and telematics systems. Although wireless sensor network nodes are operated with low-power 8bit processor to execute simple tasks like environment monitoring, the nodes in these complex systems have to execute more difficult tasks. Generally, MAC protocols for wireless sensor networks attempt to reduce the energy consumption using duty cycling mechanism which means the nodes periodically sleep and wake. However, in the duty cycling mechanism. a node should wait until the target node wakes and the sleep latency increases as the number of hops increases. This sleep latency can be serious problem in complex and sensitive systems which require high speed data transfer like military, wing of airplane, and telematics. In this paper, we propose a solution for reducing transmission latency through distributed duty cycling (DDC) in wireless sensor networks. The proposed algorithm is evaluated with real-deployment experiments using CC2420DBK and the experiment results show that the DDC algorithm reduces the transmission latency significantly and reduces also the energy consumption.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.269-272
• /
• 2011

Recently, all areas of IT has been rapidly in land. As a result, the location is very important in everyday life. But in ship are limits network with communication Equipment and service. As a result, be far removed from information age. Currently, ship is connected with the outside world via satellite on the voyage. But, because high billing, ship is possible data transfer using low speed bandwidth. Because ship is not possible using LAN, only limit ship's crew some use internet in limited space. So, ship is required construction of the network. In this paper, because composition of basic IT environment with information need of crew and customer from ship to cruises, there construct LAN in ship and propose network design for network of ship.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.187-190
• /
• 2010

Lately, IT has been rapidly in land. as a result, mobile device come into wide use and is very important in everyday life. But in ship are limits network with communication Equipment and service. as a result, be far removed from information age. Currently, ship Is connected with the outside world via satellite on the voyage. but, because high billing, ship is possible data transfer using low speed bandwidth. because ship is not possible using LAN, only limit ship's crew some use internet in limited space. so, ship is required construction of the network. in this paper, because composition of basic IT environment with information need of crew and customer from ship to cruises, there construct LAN in ship and propose network design for network of ship.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.735-737
• /
• 2015

In this paper, SaaS (Software as a Service) based transport and construction process safety management systems by utilizing the construction work process management and safety management and schedule, and results for various types of construction process, achieved through high-speed wireless Internet access by applying to ensure a systematic means for safety and can quickly and accurately manage all made within the process control system. The operator should be indicated by using a smart phone to work as a supervisor report the current status and results of the operation. Also be reported to the supervisor immediately in an emergency situation and there is no vibration occurs over a period of time the smartphone is to check the danger to the operator. If the commissioner is directed to specific business processes that establish and verify the results obtained and the result is satisfied by presenting the part down the measures insufficient command of the field workers risk situations. In the case of software (server) to store all the data relating to the operation member in charge of management and security.