• 기술사
• /
• 제16권2호
• /
• pp.1-11
• /
• 1983

The resistance property of a high speed passenger craft (: "DOL-PIN HO" designed by the author in 1972) is investigated as follows; -. The Resistance property of the craft is determined by savitsky′s method and blount-Fox′s method. The theoretical results are also compared with the full scale data. The comparison reveals that the result when using blount/fox′s method are in much closer agreement with the full scale data than savitsky′s. -. The effects of ship speed on the positions of the center of pressure and of the longitudinal center of gravity (L.C.G.) are investigated. The investigation shows that the position of L.C.G. of the craft is almost constant although the ship speed is changed. -. The effect of transom flap on the Resistance property of the craft is studied using savitsky/brown′s method. From the study it is found that the resistance of the craft is decreased and hence speed gain (about 3% of the service speed) can be obtained, when using transom flap for the craft.

• 해양환경안전학회지
• /
• 제5권1호
• /
• pp.1-8
• /
• 1999

During the last 10 years, the various type of high speed craft have been greatly developed, and since around of 1990 the large size of high speed passenger and/or cargo vessels are also introduced and took into the service in the various routes over the world. In a marine traffic way some bridge need to build across a rivers, cannals or a waterways. This one will be an obstruction and potential risk of collision in the way of high speed craft. Accordingly some of collision accident have been reported, which were caused by a lost control, wind and hydrodynamic forces, fog or human errors. In this paper a high speed craft having 40 m length is assumed to be collided with a circular type of bridge piers at right angle. The mode of deformation, penetration depth of collapse, impact forces, reduction of speed, loss of kinetic energy, and influence of scantlings, etc. have been calculated in each speed with a time variation to find a maximum values within a limit, and are graphically presented.

• 대한조선학회논문집
• /
• 제46권4호
• /
• pp.373-381
• /
• 2009

The running attitude of a high-speed planing craft may change significantly depending on its speed in seaway. Other variables that may influence its running attitude are its weight, center of gravity, sea conditions, and so on. In this paper, planing craft model tests were carried out with respect to above variables in SNU towing tank, and vertical motion responses of a planing craft in regular head waves were analyzed. The experimental results in regular waves were compared with those in calm water, and compared with the theoretical estimations. Finally, the effects of running speeds of a planing craft on its motion amplitudes are confirmed.

• 한국해양공학회지
• /
• 제25권2호
• /
• pp.113-119
• /
• 2011

The Korea navy has a vital national interest in maritime security. The national strategy for maritime security focuses on preventing terrorism, crime, and hostile acts in the maritime domain. This requires the development of high speed crafts for maritime security in the South Korea domain. This paper reviews the state of the art on the development of high speed craft internationally, including efforts by the U.S. navy, and analyses the riverine environment to operate high speed crafts in South Korea. This paper makes specific proposals for high speed craft such as their main dimensions, speed, endurance, hull structure material, propulsion system, and general arrangement and 3D shape. This paper was used in the generation of basic resources for future ROC (requirement of capability) of high speed crafts using an engineering methodology.

• 대한조선학회논문집
• /
• 제42권4호
• /
• pp.341-349
• /
• 2005

With increasing demands of high speed transportation, recently a lot of high speed marine vehicles, such as SWATH, semi-planing craft, planing craft, hydrofoil craft, SES and so on, have been paid attention especially in high speed region over the Froude number 0.5. The resistance characteristics of the vehicles should be experimentally evaluated in the towing tank. At the Seoul National University, a light-weight cantilever type towing carriage was devised and installed in the towing tank. Wireless measurement devices were also provided for appropriate data acquisition during high-speed towing tests. With the new carriage system, a series of model tests were performed to investigate the hydrodynamic characteristics of a stepped planning hull in the towing tank and the resistance performances of the hull are introduced in this report.

• 한국항해항만학회지
• /
• 제32권8호
• /
• pp.583-588
• /
• 2008

활주형선은 고속 운항시 선저에 동적압력을 발생시켜 선체를 부상시킴으로서 저항이 감소하게 되어 고속의 항주가 가능하게 된다. 일반적으로 선저에 스텝을 적용한 선형은 일체형 활주형선에 비하여 고속 주행시 선저 공기공급에 따른 접수면 감소로 인하여 전체저항 감소에 따른 속도향상과 연비절감 효과가 있다. 본 논문에서는 고속 선형시험이 가능한 실 해역모형시험을 이용하여 선저 스텝개수에 따른 고속 Stepped Hull 선형의 저항성능을 비교, 분석하였다. 시험결과, 2개의 스텝을 가지는 선형이 최소저항 선형임을 확인할 수 있었다.

• 대한조선학회논문집
• /
• 제47권4호
• /
• pp.496-507
• /
• 2010

It is well known that when a high-speed planing craft travels in following seas it experiences long-periodic motions due to low encounter frequency, and it often loses its course keeping stability. Therefore, it is necessary to study the sea-keeping performance and stability of it in the following seas. In this paper, the vertical motions of a planing craft were measured in following regular waves, and the test results were compared with the theoretical results. In the case of the same encounter frequency, non-dimensionalized motion amplitudes become larger as Froude number is higher, and non-dimensionalized motion amplitudes in head waves are larger than those in following waves. The mean values of the motions in following waves are similar to the running attitudes of a craft in calm water at the same Froude number.

• 한국해양공학회지
• /
• 제20권1호
• /
• pp.32-36
• /
• 2006

The initial hull form of a 100 tan, 45 knot class high-speed craft is newly developed. The resistance performances are investigated using a model test at high speed in a circulating water channel. The effect of the initial trim is studied together. Wave patterns are observed to clarify the relationship between the resistance performance and the wave characteristics. It can be found that the initial trim plays a role in increasing the resistance performance above a certain velocity.

• 대한조선학회논문집
• /
• 제45권4호
• /
• pp.396-402
• /
• 2008

As demands for high speed sea transportations have recently been increased, various high speed ships appear. Among them the WIG is believed to be one of the next generation of the sea transportation system. Test flight of the 20 seaters WIG craft, Haenarae-X1, developed by MOERI was a success in August, 2007. Development of the large WIG is now ongoing, and it is expected to be commercialized in the near future. In this study we designed a remote controled WIG Craft and carried out its performance test in order to establish engineering design procedures of an Unmanned WIG (U-WIG) craft.

• 한국항해항만학회지
• /
• 제32권10호
• /
• pp.759-764
• /
• 2008

활주형선이 수면 위를 활주하여 고속이 가능하기 위해서는 특별하게 설계되어 진다. 대부분의 활주형선은 충격하중을 줄이고 황요, 종요 등의 운동성능을 개선시키기 위하여 스프레이 스트립을 설치하며, 고속에서는 파형개선과 양력발생으로 스프레이저항과 마찰저항이 감소되는 것으로 알려져 있다. 이에, 본 논문에서는 모형시험을 통하여 스프레이 스트립의 부착 유무에 따른 고속 활주형선의 저항특성을 비교, 분석하였으며, 시험결과, 스프레이 스트립 부착 고속 활주형선이 미 부착 선형에 비해서 $3.0{\sim}5.0%$의 저항감소 효과를 확인할 수 있었다.