• 제목/요약/키워드: High Tc phase

검색결과 189건 처리시간 0.032초

용융법에 의한 Bi계 Thick Film 합성 (A Study on the Fabrication of Bi System Thick Film Using Melting Process)

  • 이상헌
    • 전기학회논문지
    • /
    • 제58권9호
    • /
    • pp.1775-1777
    • /
    • 2009
  • BiSrCaCuO films were prepared on MgO single substerate at $885^{\circ}C$ by melt process. The films showed superconductivity above liquid nitrogen temperature (Tc= 96K). To investigate the effect of a melting temperature on the forming of the surface texturing, the samples were prepared under various temperature. The used powder was of high Tc phase. It is implies that the origin of the properties due to the heat treatment.

내인성 및 외인성 Estrogen이 관상심장질환 위험인자에 미치는 영향 -제1보 : 내인성 및 외인성 Estrogen이 혈액 지질 농도에 미치는 영향- (The Effects of Endogenous and Exogenous Estrogen on Risk Factors of Coronary Heart Disease -Part I : On Serum Lipid Levels-)

  • 박유신
    • Journal of Nutrition and Health
    • /
    • 제30권3호
    • /
    • pp.307-317
    • /
    • 1997
  • To determine the effects of endogenous and exogenous strogen on serum lipid levels, twenty nonsmoking healthy Korean women were participated in this experiment for 12 weeks. They were assigned to three groups : (1) eight women aged 22 to 30(yr) for the premenopausal(Pre) group, (2) eight, aged 49 to 60(yr) for the postmenoparusal(Pst) group, (3) four, aged 23 to 30(yr) for the oral contraceptive(OC) group which used triphasic OC formulation. Fasting blood samples representing every phase of the hormonal levels were obtained from the subjects of the Pre and the OC group. From the subjects of the Pst group, fasting blood samples were obtained once per three weeks for 12 weeks. All the serum data were adjusted for dietary effects, exercise, personality type and body mass index(BMI) by using analysis of covariation(ANCOVA). Serum lipid levels of the three groups were significantly different. While serum levels of triglycerides(TG)(p<0.0001), low density lipoprotein-chloesterol(LDL-C)/high density liporotein-cholesterol(HDL-C) ratio (LDC-C/HDL-C)(P<0.01) and total cholesterol (TC)/HDL-C ratio (TC/HDL-C)(P<0.001) were significatnly high in the Pst group, serum HDL-C(P0.001) level was significantly high in the Pre group. The OC group showed significantly low serum TC(P<0.0001) and LDL-C(P<0.0001) levels. There was no signidicant difference in the fluictuation of serum lipid levels during the menstrual cycle of the Pre group. However, in the OC group, serum TG level was significantly increased at phase 2(P<0.05) where exogenous estrogen administration was highest. Even though other serum lipid levels of the OC group were not significantly fluctuated according to the exogenous estrogen administration, there was a trend of increased levels of serum TC, LDL-C, LDL-C/HDL-C and TC/HDL-C and decreased level of HDL-C during the menstruation period. Also, serum TC level was high(P<0.005) and serum TG level was low (P<0.005) at the baseline of the OC group compared with the periods of OC administration. When screening and counseling the female population at risk for coronary heart disease(CHD), the result of this study suggest that in may be desirable to divide the population into several groups according to their personal physiological characteristics, such as age, OC administration, menstrual cycle and menopause, as well as general risk factors for CHD.

  • PDF

KURT 지하수 조건에서 셀레늄과 테크네튬의 용해도 및 주요 화학종 (Solubilities and Major Species of Selenium and Technetium in the KURT Groundwater Conditions)

  • 김승수;민제호;백민훈;김계남
    • 방사성폐기물학회지
    • /
    • 제10권1호
    • /
    • pp.13-19
    • /
    • 2012
  • 장수명 핵분열생성물인 $^{79}Se$$^{99}Tc$는 자연수 중에서 용해도가 클 뿐더러 음이온으로 존재하여 방사성폐기물 처분장에서 주요 관심핵종들로 고려되고 있다. 본 연구에서는 KURT 지하수의 다양한 pH와 산화-환원 조건에서 셀레늄과 테크네튬의 Solubility Limiting Solid Phase (SLSP)로 알려진 $FeSe_2$$TcO_2$의 용해도를 측정하였다. 또한, 지화학코드를 이용하여 실험과 유사조건에서 이들의 용해도와 주요 화학종을 계산하였다. 실험 및 계산으로부터 pH 8~9.5와 Eh=-0.3~-0.4 V 조건에서 $FeSe_2$의 용해도는 $1{\times}10^{-6}mol/L$이하이며, 주 용해 화학종은 HSe-로 판단된다. $TcO_2(s)$의 경우는 pH 6~9.5와 Eh<-0.1 V 영역에서 용해도와 주 용해 화학종이 각각 $5{\times}10^{-8}{\sim}1{\times}10^{-9}mol/L$$TcO(OH)_2$로 나타났지만, Eh=-0.35 V조건에서는 주 용해화학종이 pH가 10.5~12와 12이상에서 각각 $TcO(OH)_3^-$$TcO_4^-$로 계산되었다.

이중 H자 메타 전자파구조를 이용한 저위상잡음 발진기 (A Very Low Phase Noise Oscillator with Double H-Shape Metamaterial Resonator)

  • 이종민;서철헌
    • 대한전자공학회논문지TC
    • /
    • 제47권2호
    • /
    • pp.62-66
    • /
    • 2010
  • 본 논문은 높은 Q 특성을 갖는 이중 H자 형태의 메타 전자파구조의 공진기를 적용한 발진기를 제안하였다. 제안된 발진기는 고성능의 주파수합성부에 적용하기 위한 것으로 저위상잡음 및 높은 출력 전력을 요구한다. 특히 이중 H자 형태의 메타 전자파구조(DHM)는 전기장의 커플링을 강하게 하여 발진 주파수에서 높은 Q 값을 갖도록 설계되었다. 이러한 특성을 통해 우수한 위상잡음 특성을 얻을 수 있다. 이중 H자 형태의 메타 전자파구조를 이용한 발진기는 레이더 시스템의 주파수 합성부에 적용하기 위한 X 대역 내 발진을 형성하였으며 출력 전력은 4.33 dBm, 위상잡음은 100 kHz 옵셋에서 -108 dBc를 얻을 수 있었다.

부갑상선기능항진증 환자에서 Tc-99m MIBI 부갑상선 신티그라피를 이용한 병소 국소화 (Lesion Localization in Patients with Hyperparathyroidism Using Double-phase Tc-99m MIBI Parathyroid Scintigraphy)

  • 신중우;류진숙;김재승;문대혁;홍승모;공경엽;홍석준;이희경
    • 대한핵의학회지
    • /
    • 제33권2호
    • /
    • pp.120-130
    • /
    • 1999
  • 목적: 갑상선기능항진증 환자에서 병소의 국소화를 위하여 시행하는 Tc-99m MIBI를 이용한 double-phase 부갑상선 신티그라피와 SPECT 방법의 진단적 유용성을 평가하고, 부갑상선의 호산성 세포량과 Tc-99m MIBI 섭취와의 관계를 알고자 하였다. 대상 및 방법: 임상적으로 부갑상선기능항진증이 의심되어 부갑상선 신티그라피가 시행된 16명의 환자중 10명에서 수술이 시행되었고, 여기서 얻은 28개의 부갑상선 조직들을 대상으로 분석하였다. Tc-99m MIBI를 환자에게 정맥주사 후 15분과 2시간에 조기와 지연 바늘구멍 영상을 얻었고 이어서 SPECT 영상을 촬영하였다. 수술로 제거된 부갑상선 조직의 무게와 호산성 세포량을 구하였고, 신티그라피소견을 병리조직 결과와 비교하였다. 결과: 수술로 6개의 부갑상선종과 9개의 부갑상선 비대증이 진단되었다. 조기와 지연 바늘구멍 영상의 민감도, 특이도, 그리고 양성 예측률은 각각 46.7% (7/15),76.9% (10/13), 70% (7/10)과 66.7% (10/15), 92.3% (12/13), 90.9% (10/11)이었다. SPECT 영상은 바늘구멍 영상에 비해 1개의 부갑상선 증식증 병소를 더 진단할 수 있었다. 전체적으로 조기와 지연 바늘구멍 영상과 SPECT 영상을 종합하면 민감도, 특이도, 그리고 양성 예측률은 73.3% (l1/15), 100% (13/13), 100% (11/11)였다. 부갑상선기능항진증의 원인 중부갑상선종은 민감도가 100% (6/6)였으나 부갑상선 증식증은 55.5% (5/9)이었다. 호산성 세포량은 부갑상선종과 부갑상선 증식증에서 정상 부갑상선에 비해 증가되었으나(p<0.0001) 부갑상선종과 부갑상선증식증을 비교하면 호산성 세포량과 무게에는 유의한 차이는 없었다. 결론: Tc-99m MIBI를 이용한 double-phase 부갑상선 신티그라피와 SPECT는 부갑상선기능항진증 환자의 병소 국소화에 효과적인 방법으로 특히 부갑상선종의 국소화에 유용하였다. 부갑상선종과 부갑상선 증식증에서 모두 호산성 세포량이 증가되어 있었으나, 부갑상선종에서는 민감도가 높았고, 부갑상선 증식증에서는 낮았다. 부갑상선증식증에서 민감도가 낮은 원인에 대해서는 더 연구가 필요할 것으로 생각된다.

  • PDF

열처리 조건에 따른 Bi계 초전도체에서 상 생성 과정에 대한 연구 (A Study on the Phase Formation Process in Bi-system Superconductor with Heat Treatment Conditions)

  • 정진인;이준웅;박용필
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1999년도 추계학술대회 논문집
    • /
    • pp.221-223
    • /
    • 1999
  • In this work, samples were manufactured variously by changing conventional calcining and sintering conditions and we tried the utilization by making the heat treatment time, which is demanded to high-Tc phase formation, much shorter. We found out optimal heat treatment conditions with the analysis on formation process at superconducting phase in term of the change of calcining and sintering time and then, examined X-ray diffraction(XRD) patterns, scanning electron microscope(SEM) measurement and energy dispersive X-ray spectrometer(EDX) of the samples manufactured under heat treatment conditions which we suggest here. As a result, 2223 high-$T_c$, phase of (Bi,Pb)SrCaCuO superconductor starting with ($Bi_l$ xPbx,)$_2$$Sr_2$$Ca_2$$Cu_3$$O_y$, composition was formed from 1 hr sintering sample at temperature nearby melting point and also the completed sample with calcining and sintering time of 9 hr was formed high-$T_c$.low-$T_c$ phase appearing in sight above the critical temperature of liquid $N_2$.

  • PDF

DC 리액터형 고온초전도한류기의 전력계통 연계를 위한 자기철심리액터의 설계 (Design of the Magnetic Core Reactor for the connection to the Power System of DC Reactor Type High Temperature Superconducting Fault Current Limiter)

  • 임대준;배덕권;김호민;이찬주;윤경용;윤용수;고태국
    • 한국초전도저온공학회:학술대회논문집
    • /
    • 한국초전도저온공학회 2002년도 학술대회 논문집
    • /
    • pp.322-325
    • /
    • 2002
  • In this paper, the power-linking device connecting the high-Tc super-conducting(HTS) coil to the power system in the DC reactor type three-phase high-Tc superconducting fault current limiter (SFCL) has been designed. This design was triggered from the concept that the magnetic energy could be exchanged into the electrical energy each other. Ferromagnetic material is used as the path of magnetic flux. The device mentioned above was named Magnetic Core Reactor(MCR). MCR was designed to minimize the voltage drop caused by copper loss. The current density of the conductor was 1.3 A/mm$^2$ and % voltage drop was 2%.

  • PDF

고온초전도 케이블의 전기절연 설계 및 시험평가 (Electrical Insulation Design and Experimental Results of a High-Tc Superconducting Cable)

  • 곽동순;천현권;최재형;김해종;조전욱;김상현
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제55권12호
    • /
    • pp.640-645
    • /
    • 2006
  • A 22.9kV/50MVA class high temperature superconducting(HTS) power cable system was developed in Korea. For the optimization of electrical insulation design for a HTS cable, it is necessary to investigate the ac breakdown impulse breakdown and partial discharge inception stress of the liquid nitrogen/laminated polypropylene paper(LPP) composite insulation system. They were used to insulation design of the model cable for a 22.9kV class HTS power cable and the model cable was manufactured. The insulation test of the manufactured model cable was evaluated in various conditions and was satisfied standard technical specification in Korea. Base on these experimental data, the single and 3 phase HTS cable of a prototype were manufactured and verified.

DC 리액터형 고온초전도한류기를 위한 전력변환기의 dual-mode 운전특성 (The Operation Characteristics of Dual-mode Power Converter for DC Reactor Type Superconducting Fault Current Limiter)

  • 전우용;이승제;안민철;이안수;윤용수;윤경용;고태국
    • 한국초전도저온공학회:학술대회논문집
    • /
    • 한국초전도저온공학회 2003년도 학술대회 논문집
    • /
    • pp.43-46
    • /
    • 2003
  • The dc reactor type high-Tc superconducting fault current limiter(SFCL) is composed of three parts, a power converter, a magnetic core reactor(MCR) and a dc reactor. This study concerned with the power converter of the DC reactor type high-Tc SFCL. The rectifying devices which power converter of 6.6kV/200A SFCL consists of have to endure high voltage. We propose the dual mode power converter to reduce the voltage which each rectifying device endures. In the single phase the experiment and simulation of dual mode power converter and the simulation of power converter with one bridge rectifier are performed. The current of each system with different power converter has a same tendency and the voltage which rectifying device of dual mode power converter endures is reduced in half by comparison with that of power converter with one bridge rectifier. We found dual mode power converter can be applied to SFCL.

  • PDF

BSCCO 플라즈마 용사피막의 부분용융열처리 후 어닐링 시간에 따른 초전도 특성 (Characteristics of Plasma Sprayed BSCCO Superconductor Coatings with Annealing Time After Partial Melt Process)

  • 박정식;이선홍;박경채
    • 한국재료학회지
    • /
    • 제24권2호
    • /
    • pp.116-122
    • /
    • 2014
  • $Bi_2Sr_2CaCu_2O_x$(Bi-2212) and $Bi_2Sr_2Ca_2Cu_3O_y$(Bi-2223) high-Tc superconductors(HTS) have been manufactured by plasma spraying, partial melt process(PMP) and annealing treatment(AT). A Bi-2212/2223 HTS coating layer was synthesized through the peritectic reaction between a 0212 oxide coating layer and 2001 oxide coating layer by the PMP-AT process. The 2212 HTS layer consists of whiskers grown in the diffusion direction. The Bi-2223 phase and secondary phase in the Bi-2212 layer were observed. The secondary phase was distributed uniformly over the whole layer. As annealing time goes on, the Bi-2212 phase decreases with mis-orientation and irregular shape, but the Bi-2223 phase increases because a new Bi-2223 phase is formed inside the pre-existing Bi-2212 crystals, and because of the nucleation of a Bi-2223 phase at the edge of Bi-2212 crystals by diffusion of Ca and Cu-O bilayers. In this study the spray coated layer showed superconducting transitions with an onset Tc of about both 115 K, and 50 K. There were two steps. Step 1 at 115 K is due to the diamagnetism of the Bi-2223 phase and step 2 at 50 K is due to the diamagnetism of the Bi-2212 phase.