• 한국전기전자재료학회논문지
• /
• 제16권7호
• /
• pp.634-640
• /
• 2003

This paper is to be researched into ozone generation character of Bi-Ti-Si type high dielectric yield ceramic catalyst discharge tube. And conditions of basic experiment are the outside diameter of discharge tube : 52 mm, the length of discharge tube : 350 mm, the frequence : 900 Hz, the temperature of cooling water : 25 $^{\circ}C$, quantity of flow : 5, 10, 20 l/min, pressure : 1.2, 1.4, 1.6 atm, and distance of discharge gap : 0.4, 0.6, 0.8 mm. Ozone generation characteristics were measured to consumption power. At quantity of flow : 20 l/min, discharge gap : 0.6 mm, pressure : 1.6, and consumption power : 150 W, Maximum ozone generation efficiency of 175 g/kWh was obtained. Maximum ozone generation efficiency was measured below the flow quantity of 20 l/min at below pressure of 1.6 atm. However, Maximum ozone generation efficiency was measured over the flow quantity of 20 l/min at over pressure of 1.6 atm.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.612-621
• /
• 2008

For the purpose of improving accuracy in jet noise prediction and investigating its generation mechanism, high subsonic jets were computed by using compressible Large Eddy Simulation(LES), wherein the inflow forcing or disturbance added in the inflow shear layer was incorporated. The far-field Sound Pressure Levels(SPL) as well as the flow field resulted in good agreement with available experimental data by applying only the high azimuthal modes among the inflow forcing parameters. We found that this result was due to an important role of the inflow forcing upon breaking down the axiymmetric vortices that caused high amplitude velocity and pressure fluctuations. In order to examine generation mechanism of the dominant noise component, wavelet transformation was introduced to reveal the presence of a well-organized structure of pressure fluctuations that originated mainly from vortex motions near the end of the jet potential core. This structure took a train of alternately positive and negative wavelet-transformed pressure regions along the jet distance, spreading towards the downstream with advection and propagation. It was concluded that this structure and its dynamic motion are the reason why a high subsonic jet produces the dominant noise with a particular downstream directivity.

• 한국표면공학회지
• /
• 제34권5호
• /
• pp.367-377
• /
• 2001

Plasma is generated by electrical discharge. Most plasma generation has been carried out at low-pressure gas typically less than one millionth of atmospheric pressure. Plasmas are in general generated from impact ionization of neutral gas molecules by accelerated electrons. The energy gain of electrons accelerated in an electrical field is proportional to the mean free path. Electrons gain more energy at low-pressure gas and generate plasma easily by ionization of neutrals, because the mean free path is longer. For this reason conventional plasma generation is carried out at low pressures. However, many practical applications require plasmas at high-pressure. In order to avoid the requirement for vacuum pumps, researchers in Korea start to develop plasmas in high-pressure chambers where the pressure is 1 atmosphere or greater. Material processing, environmental protection/restoration and improved energy production efficiency using plasmas are only possible for inexpensive bulk plasmas. We thus generate plasmas by new methods and plan to set foundations for new plasma technologies for $21^{st}$ / century industries. This technological research will play a central role in material processing, environmental and energy production industries.

• Journal of Welding and Joining
• /
• 제30권6호
• /
• pp.10-14
• /
• 2012

Recently the low alloy steel plate made with manganese-molybdenum is used widely in steam drum and separator of the new coal-fired power plant boiler. This material is suitable for the vapor storage of high pressure and high temperature. The high temperature creep strength of Mn-Mo alloy is higher than the carbon plate(SA516) that used in the subcritical pressure boiler. It reduces the thickness of the pressure vessel and makes the lightweight possible. Recently in the power plant boiler operation and production process, the damage has happened frequently in the heat affected zone and base material according to the hydrogen crack and delayed crack. This paper describes the research result about the damage case experienced in the boiler steam drum production process and present the optimum manufacture method for the similar damage prevention of recurrence.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.501-501
• /
• 2012

A 2.45 GHz electron cyclotron resonance (ECR) plasma source with a belt magnet assembly configuration (BMC) was developed for hyperthermal neutral beam (HNB) generation. A plasma source for high flux HNB generation should be satisfied with the requirements: low pressure operation, high density, and thin plasma. The ECR plasma source with BMC achieved high density at low operation pressure due to electron confinement enhancement caused by high mirror ratio and drifts in toroidal direction. The 2.45 GHz microwave launcher had a circularly bended WR340 waveguide with slits. The microwave E-field profile induced by the microwave launcher was studied in this paper. The E-field profile was a cups field perpendicular to B-filed at ECR zone. The optimized E-field profile and B-field were found for effective ECR heating.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2242-2244
• /
• 1999

Recently, An important research field of pulsed power is high voltage, high power generation with exploding wire opening switch. Another point of view exploding wire effects have been researched for generation of the pulsed high pressure shock wave. Theoretical considerations of the shock pressure generation along with experiment results are presented in this paper and. Some experimental results of hard rock fracturing show the possibilities of commercial using.

• 보건행정학회지
• /
• 제23권4호
• /
• pp.376-386
• /
• 2013

Purpose: The purpose of study is to estimate the number of chronic disease patients and medical care expenditure at the time baby-boomers belong to 65 years old aging population, and compare with current 65 year-old aging population. Methods: Analysis method used an estimating formula devised by the researcher and estimated the number of chronic disease patients and medical care expenditure of each generation. Results: When comparing the estimated number of chronic diseases patients of each generation, 40.6% of the first generation, 76.4% of the second generation, 95.2% of third generation are expected to get chronic disease. When comparing each generation's total medical care expenditure, based on the estimated number of chronic diseases patients of each generation, the second generation( 1,206,251,224 thousand won) showed higher than other generation. This study compared the number of chronic disease patients and medical care expenditure between the second generation of the elderly and current elder generation. As a result, the second generation patients was higher than the fourth generation in high blood pressure, diabetes, psychological and behavioral disorder, and neurological diseases whereas the fourth generation is only high the number of patients in heart disease. As for total medical care expenditure, the second generation paid more in high blood pressure, psychological and behavioral disorder while the fourth generation in neurological disease and heart disease. Conclusion: It is desired that considering the number of chronic disease patients and medical care expenditure of baby boomers accounting for 14.6% of total population, in-depth follow-up study is carried out that inquires into what are issues with a current chronic disease management project, what business is needed in order to manage these issues, and how to fund to cover increasing medical care expenditure.

• 터널과지하공간
• /
• 제10권2호
• /
• pp.218-226
• /
• 2000

고성능 폭약의 성능을 결정하기 위해서는 폭발압력, 폭발속도, 열, 발생되는 가스 등이 정확히 기술될 수 있어야 한다. 본 연구에서는 실측하는데 어려움이 따르는 폭굉 시의 현상을 이해하기 위해 폭약이 폭발할 때 발생하는 압력, 부피팽창, 온도, 폭발속도 등을 이론적으로 계산하고자 하였다. 본 연구를 통해 폭발 현상을 표현하기 위한 계산 프로그램이 개발되었으며 이 프로그램을 이용하여 ANFO와 NG에 대해 폭약성능에 영향을 미치는 요소들을 이론적으로 계산하였다.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2000년도 춘계학술대회 논문집(Proceeding of the KOSME 2000 Spring Annual Meeting)
• /
• pp.77-85
• /
• 2000

LPG gains many advantages of a high octane number low emissions and low cost over conventional fuel. The fuel has been naturally used in engines to save running cost but the first generation fuel feeding system was not satisfied with stringent requirement for exhaust emissions, A liquid direct injection system into a cylinder has been suggested as a next generation system to maximize a fuel economy as well as to reduce emissions. In this paper LPG sprays are compared with diesel sprays in a high pressured surrounding condition in order to understand the high pressure spray characteristics, The spray images show that LPG spray penetrates further soon after the injection then the sprays stays in a distant. it may explain the flashing effect of LPG.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1915-1918
• /
• 2003

Atherosclerosis, which is a degenerate disease, is believed to occur in the vascular system due to deposition of cholesterol and low density lipoprotein(LDL) or thrombosis on the blood vessel. Atherosclerosis narrows arterial lumen, which is known as stenosis phenomenon of blood vessel. Pathogenesis of atherosclerosis is thought to occur mainly by aging. Restenosis phenomenon is observed in the same site of insertion of a stent and balloon angioplasty after treatment of interventional theraphy. Several hypothetical theories related to the generation of atherosclerosis have been reported: high shear stress theory, low shear stress theory, high shear stress gradient theory, flow separation and turbulence theory and high pressure theory. However, no one theory clearly explains the causes of atherosclerosis. In the present study the generation of atherosclerosis in the left coronary artery is investigated. The hypotheses are verified by using the computer simulation.