• 한국콘텐츠학회논문지
• /
• 제15권5호
• /
• pp.179-190
• /
• 2015

본 연구는 우리 사회에서 나타나는 정치적 소통 현상에 주목하여 소통 만족에 영향을 미치는 요인을 논의하였다. 정치적 소통의 주요 영향요인으로 개인의 정치적 성향과 미디어 이용을 살펴봄으로써 정치 커뮤니케이션 행위와 정치적 소통 만족도를 평가했다. 전국 16개 시도에 거주하는 만19세 이상 성인 1000명을 대상으로 면접원 설문조사를 실시한 결과, 진보적 정치성향은 온라인 미디어 이용이 많았으며, 개인의 의견을 적극 게재하는 '쓰기/대화'의 정치 커뮤니케이션 행위가 소통 만족에 긍정적인 영향을 미치는 것으로 나타났다. 반면 보수, 중도적 정치성향은 오프라인 미디어를 주로 이용하였고, 타인의 의견을 살피는 '읽기/시청'의 소극적 정치 커뮤니케이션 행위가 중점적으로 나타났다. 따라서 우리 사회에서 정치적 소통을 원활히 하기 위해서는 시민의 정치적 특성에 대한 이해가 선행되어야 하며, 이에 따른 차별화된 미디어 활용 정치커뮤니케이션이 제고되어야 함을 논의할 수 있었다.

• 산업기술연구
• /
• 제25권A호
• /
• pp.151-156
• /
• 2005

Auto exhausts and air pollution can become trapped in the cabin of vehicle, reducing the amount of oxygen available for breathing. Driver may feel sleepy, headaches, nausea, confusion, dizziness and lower levels of oxygen can damage the driver's general health. Consequently, oxygen generator purified oxygen into the car to help driver get the oxygen driver's body needs. In this study, in order to evaluate the oxygen generator performance, the samples that the various conditions(humidity(50%, 100%), flow and oxygen concentration) were examined. There were three types of oxygen generator; sample 1($2.5{\ell}/min$, $36%O_2$), sample 2($4.5{\ell}/min$, $41%O_2$) and sample 3($5{\ell}/min$, $39%O_2$). As the humidity increased from 50% to 100%, the oxygen concentration of the sample 1(36%), 2(41%) and 3(39%) was reduced $31%O_2$, $38%O_2$ and $38%O_2$, respectively. Also, the each sample measured that effect of human in car on oxygen concentration, if the oxygen concentration is one person in car, each sample of oxygen concentration was $20.8%O_2$, $23.7%O_2$ and $21.2%O_2$. From the above results, it was shown that oxygen generator for car, if the oxygen concentration is increased, effect of humidity is reduced, and that in the sample of supplying a high-rate of oxygen, the oxygen concentration is increased. It was suggested that effect of humidity on oxygen generator for car can be reduced according to the supply of oxygen.

• 한국건설순환자원학회논문집
• /
• 제4권4호
• /
• pp.425-430
• /
• 2016

산업의 급격한 발달과 함께 사회 또한 급격한 발달을 이루면서 전 세계는 편리한 생활을 이룰 수 있게 되었다. 하지만 이러한 산업의 발달의 이면에는 환경오염으로 인한 지구온난화와 산업부산물 대량 발생 등의 문제가 발생하고 있는 실정이다. 이에 본 연구는 건축분야에서 $CO_2$ 배출 비율이 높은 시멘트의 사용량을 줄이고자 산업부산물인 고로슬래그와 순환 유동층 연소 플라이애시를 사용하였으며, 국내 염색공단에서 배출되고 있는 20만 톤 이상의 슬러지를 재활용하는 방안을 검토하기 위해 염색슬러지 탄화물을 활용한 무시멘트 경화체의 특성에 대한 기초자료를 제시하고자 하였다. 그 결과, 염색슬러지 탄화물의 치환율이 증가함에 따라 공기량은 증가하였고 플로어는 증가하였다. 또한 염색슬러지 탄화물 치환율이 증가함에 따라 휨강도 및 압축강도는 감소하는 경향을 보였다.

• 한국수소및신에너지학회논문집
• /
• 제23권4호
• /
• pp.412-419
• /
• 2012

Increasing demand for natural gas and higher natural gas prices in the recent decades have led many people to pursue unconventional methods of natural gas production. POSCO-Gwangyang synthetic natural gas (SNG) project was launched in 2010. As the market price of natural gas goes up, the increase of its price gets more sensitive due to the high cost of transportation and liquefaction. This project can make the SNG economically viable. In parallel with this project, KEPCO (Korea Electric Power Corporation) joined in launching the SNG Quality Standard Bureau along with KOGAS (Korea Gas Corporation), POSCO and so on. KEPCO Research Institute is in charge of SNG fueled gas turbine combustion test. In this research, several combustion tests were conducted to find out the effect of hydrogen contents in SNG on gas turbine combustion. The hydrogen in synthetic natural gas did not affect on gas turbine combustion characteristics which are turbine inlet temperature including pattern factor and emission performance. However, flame stable region in ${\Phi}$-Air flow rate map was shifted to the lean condition due to autocatalytic effect of hydrogen.

• 한국한의학연구원논문집
• /
• 제15권2호
• /
• pp.119-124
• /
• 2009

The purpose of this study was investigation of quantitative analysis of marker substances in Paeonia lactiflora extracts by solid fermentation. High performance liquid chromatography (HPLC) for the determination of albiflorin and paeoniflorin in P. lactiflora extracts by solid fermentation, the separation method was performed on C18 column ($250\;mm\;{\times}\;4.6\;mm$, $5\;{\mu}m$, RS tech) using gradient solvent mixtures of water-acetonitrile with photodiode array detector (230nm). The flow rate was 1.0 ml/min. Retention time of albiflorin and paeoniflorin was about 28.88, 31.92 min and linearity of calibration was showed good result(r2 = 0.9998, 0.9996), respectively. Content of albiflorin was $0.090\;{\pm}\;0.03%$ in P. lactiflora extract(control), $0.102\;{\pm}\;0.00%$ in P. lactiflora extract fermented with Paecilomyces japonica, $0.056\;{\pm}\;0.01%$ in P. lactiflora extract fermented with Ganoderma lucidum, $0.093\;{\pm}\;0.00%$ in P. lactiflora extract fermented with honey and $0.046\;{\pm}\;0.00%$ in P. lactiflora extract fermented with Nuruk. Content of paeoniflorin was $4.506\;{\pm}\;0.13%$ in control, $2.599\;{\pm}\;0.04%$ in P. lactiflora extract fermented with Paecilomyces japonica, $1.222\;{\pm}\;0.03%$ in P. lactiflora extract fermented with Ganoderma lucidum, $2.750\;{\pm}\;0.05%$ in P. lactiflora extract fermented with honey and $0.847\;{\pm}\;0.00%$ in P. lactiflora extract fermented with Nuruk, respectively. Content of the marker substances did not increase in all fermentation experiment group.

• 한국전기전자재료학회논문지
• /
• 제26권11호
• /
• pp.816-820
• /
• 2013

We investigated the characteristics of the silicon oxy-nitride and nitride films grown by plasma-enhanced chemical vapor deposition (PECVD) at the low temperature with a varying $NH_3/N_2O$ mixing ratio and a fixed $SiH_4$ flow rate. The deposition temperature was held at $150^{\circ}C$ which was the temperature compatible with the plastic substrate. The composition and bonding structure of the nitride films were investigated using Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). Nitrogen richness was confirmed with increasing optical band gap and increasing dielectric constant with the higher $NH_3$ fraction. The leakage current density of the nitride films with a high NH3 fraction decreased from $8{\times}10^{-9}$ to $9{\times}10^{-11}(A/cm^2$ at 1.5 MV/cm). This results showed that the films had improved electrical properties and could be acceptable as a gate insulator for thin film transistors by deposited with variable $NH_3/N_2O$ mixing ratio.

• Korean Chemical Engineering Research
• /
• 제49권6호
• /
• pp.798-803
• /
• 2011

난황에 포함된 IgY는 포유동물에 있는 바이러스나 항원에 반응하는 항체와 같은 역할을 한다. IgY 분리를 위해 난황을 전처리한 후 3-zone SMB를 이용하여 지질단백질들로 부터 분리하는 전산모사연구를 수행하였다. 회분식 크로마토그래피와 pulse input method(PIM) 실험을 이용하여 전산모사 매개변수와 흡착 등온식을 얻었다. Aspen simulator를 이용하여 전산모사를 수행하여 IgY를 분리할 수 있는 SMB 운전조건을 다음과 같이 제시할 수 있었다. 삼각형 이론의 $m_2$와 $m_3$ 값은 각각 0.18, 1.0이고 스위칭 타임은 419 초이었다. 전산모사 결과 raffinate의 IgY 순도가 98.39%이고 두번째 싸이클에서 순도가 정상상태에 도달하였다.

• 대한기계학회논문집A
• /
• 제21권6호
• /
• pp.961-970
• /
• 1997

A numerical method is presented to predict and analyze the shape of a growing billet produced from the "spray forming process" which is a fairly new near-net shape manufacturing process. It is important to understand the mechanism of billet growing because one can obtain a billet with the desired final shape without secondary operations by accurate control of the billet shape, and it can also serve as a base for heat transfer and deformation analysis. The shape of a growing billet is determined by the flow rate of the alloy melt, the mode of nozzle scanning which is due to cam profile, the initial positio of the spray nozzle, scanning angle, and the withdrawal speed of the substrate. In the present study, a theoretical model is first established to predict the shape of the billet and next the effects of the most dominent processing conditions, such as withdrawal speed of the substrate and the cam profile, on the shape of the growing billet are studied. Process conditions are obtained to produce a billet with uniform diameter and flat top surface, and an ASP30 high speed steel billet is manufactured using the same process conditions established from the simulation.imulation.

• 대한기계학회논문집B
• /
• 제24권5호
• /
• pp.632-639
• /
• 2000

Conjugate heat transfer from a heat generating module ($31{\times}31{\times}7mm^3$) bonded through the module support on the floor of a parallel-plate channel(20mm high, 400mm wide, and 800mm long) to mixed convective air flow(0.2${\sim}$0.9m/s) is studied experimentally. The input power to the module is changed in a range 1.0${\sim}$4.5W, the floor thickness 0.2${\sim}$5mm, and the thermal resistance of module support, Rc:=0.06, 1.03 and 82.0K/W. Thermal conductance(Uc) of the board and convective thermal conductance($U_A$) from the module were derived, and the effect of V; Rc and t on Uc was investigated. It is found that the conjugate conductance (Uc) and the conductive heat transfer ratio ($Q_B$/Q) depend on the thermal resistance of the module support, the air velocity and the board thickness. The change of the module support resistance and the board thickness helps to elucidate the relative significance of heat transfer paths through the module support, the board, and from the board surface to the air. Additional information is investigated about the dependence of the heat transfer rate on the mixed convection parameter.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.21-26
• /
• 2008

Recently, small and medium-sized buildings have employed a multi-heat pump. The major benefits of the multi-heat pump over a conventional system are that it is easier system to maintain along with a diversification of facility use, and high comfortability. The performance of multi-heat pump systems can be enhanced by using geothermal energy instead of air source energy. This paper describes the multi-heat pumps applied in an ground source heat pump system for an actual building. The performance of a ground source multi-heat pump installed in the field was investigated in cooling mode. The maximum COP of the systems with single U-tube and double tube ground loop heat exchangers were 6.6 and 6.0, respectively. It is suggested that the new algorithms to control the flow rate of secondary fluid for ground loop heat exchanger have to be developed in order to enhance the performance of the system.