• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.26.1-26.1
• /
• 2011

We investigated the atomic layer deposition (ALD) process for nitrogen doped ZnO and the application for n-ZnO : N/p-Si (NW) coaxial hetero-junction photodetectors. ALD ZnO:N was deposited using diethylzinc (DEZ) and diluted $NH_4OH$ at $150^{\circ}C$ of substrate temperature. About 100~300 nm diameter and 5 um length of Si nanowires array were prepared using electroless etching technique in 0.108 g of $AgNO_3$ melted 20 ml HF liquid at $75^{\circ}C$. TEM images showed ZnO were deposited on densely packed SiNW structure achieving extraordinary conformality. When UV (360 nm) light was illuminated on n-ZnO:N/p-SiNW, I-V curve showed about three times larger photocurrent generation than film structure at 10 V reverse bias. Especially, at 660 nm wave length, the coaxial structure has 90.8% of external quantum efficiency (EQE) and 0.573 A/W of responsivity.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.1
• /
• pp.55-59
• /
• 2009

As one of the methods for recycling the FRP from the small and medium waste ships, separation of roving layer from the mat has some merits in a sense of the recycling energy and the environmental effects. Similar characteristics, however, between the roving and the mat even with different ratio of the resin and the glass and the thickness of the roving, much thinner than the mat, make the mechanically automatic differentiation difficult. In this study spectrochemical differentiation between the two layers has been made using (1) boiling concentrated sulfuric acid which can dissolve the resin in the FRP layer, (2) methanol and isopropanol solution saturated with KOH which can dissolve the glass, or (3) hydrogen fluoride(HF) solution which can reacts with $SiO_2$ fragments of the glass. Furthermore coloring water-soluble dye following the HF treatment makes the roving layer more distinguishable photo-physically.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.1
• /
• pp.43-46
• /
• 2010

As one of the methods for recycling the FRP used for the small and medium-sized waste ships, separation of the roving layer from the mat has some merit in a sense of the recycling energy and the environmental effects. Similar characteristics between the roving and the mat make the mechanically automatic differentiation difficult. They, however, contain different ratio of the resin and the glass and the thickness. In this study photo physical differentiation between the two layers has been made using (1) boiling concentrated sulfuric acid which can dissolve the resin in the FRP layer and (2) hydrogen fluoride(HF) solution which can reacts with $SiO_2$ fragments of the glass. Furthermore coloring the FRP sample with water-soluble dye following the HF treatment makes the roving layer more distinguishable photophysically. The implementation of HF treatment has been successfully tested in this study.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.128-128
• /
• 2011

Polysilicon thin-film transistors (poly-Si TFTs)는 능동행렬 액정 표시 소자(AMLCD : Active Matrix Liquid Crystal Display)와 DRAM과 같은 메모리 분야에 폭넓게 적용이 가능하기 때문에 많은 연구가 진행되고 있다. 최근 poly-Si TFTs의 우수한 특성으로 인하여 주변 driving circuits에 직접화가 가능하게 되었다. 또한 디스플레이 LCD 패널에 controller와 메모리와 같은 다 기능의 장치을 직접화 하여 비용의 절감과 소자의 소형화가 가능한 SOP (System on panels)에 연구 또한 진행 되고 있다. 이미 잘 알려진 바와 같이 비휘발성 메모리는 낮은 소비전력과 비휘발성이라는 특성 때문에 이동식 디바이스에 데이터 저장 장치로 많이 사용되고 있다. 하지만 플로팅 타입의 비휘발성 메모리는 제작공정의 문제로 인하여 SOP의 적용에 어려움을 가지고 있다. SONOS 타입의 메모리는 빠른 쓰기/지우기 효율과 긴 데이터 유지 특성을 가지고 있으나 소자의 스케일링 따른 누설전류의 증가와 10년의 데이터 보존 특성을 만족 시킬 수 가 없는 문제가 발생한다. 본 연구에서는 SOP 적용을 위하여 ELA 방법을 통하여 결정화한 poly-Si TFT memory를 SiO2/Si3N4/SiO2 Tunnel barrier와 High-k HfO2과 Al2O3을 Trapping layer와 Blocking layer로 적용, 비휘발성 메모리을 제작하여 전기적 특성을 알아보았다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.317-318
• /
• 2012

현재의 반도체 산업에서 Hafnium oxide와 Hafnium silicates같은 high-k 물질은 CMOS gate와 DRAM capacitor dielectrics로 사용하기 위한 대표적인 물질에 속한다. MOSFET (metal oxide semiconductor field effect transistor)구조에서 gate length는 16 nm 이하로 계속 미세화가 연구 중이고, 또한 gate는 기존구조에서 Multi-gate구조로 다변화가 일어나고 있다. 이를 통해 게이트 절연막은 그 구조와 활용범위가 다양해지게 될 것이다. 동시에 leakage current와 dielectric break-down을 감소시키는 연구가 중요해지고 있다. 그러나 나노 영역에서의 기계적 특성에 대한 연구는 전무한 상태이다. 따라서 복잡한 회로 공정, 다양한 Multi-gate 구조, 신뢰도의 향상을 위해서는 유전박막 물질자체와 계면에서의 물리적, 기계적인 특징의 측정이 상당히 중요해지고 있다. 이에 본 연구는 Nano-indenter의 통해 경도(Hardness)와 탄성계수(Elastic modulus) 등의 측정을 통하여 시료 표면의 나노영역에서의 기계적 특성을 연구하고자 하였다. $HfO_2$게이트 절연막은 rf magnetron sputter를 이용해 Si (silicon) (100)기판위에 박막형태로 증착하였고, 이후 furnace에서 질소분위기로 온도(400, 450, $500^{\circ}C$)를 달리하여 20분 열처리를 하였다. 또한 Weibull distribution을 이용해 박막의 characteristic value를 계산하였으며, 실험결과 열처리 온도가 $400^{\circ}C$에서 $500^{\circ}C$로 증가함에 따라 경도와 탄성계수는 7.4 GPa에서 10.65 GPa으로 120.25 GPa에서 137.95 GPa으로 각각 증가하였다. 이는 재료적 측면으로 재료의 구조적 우수성이 증가된 것으로 판단된다.

• Journal of the Korean institute of surface engineering
• /
• v.55 no.5
• /
• pp.247-260
• /
• 2022

Since the first report on ferroelectricity in Si-doped hafnia (HfO2), this emerging ferroelectrics have been considered promising for the next-generation semiconductor devices with their characteristic nonvolatile data storage. The robust ferroelectricity in the sub-10-nm thickness regime has been proven by numerous research groups. However, extending their scalability below the 5 nm thickness with low temperature processes compatible with the back-end-of-line technology. In this review, therefore, the current status, technical issues, and their potential solutions of atomic layer deposition (ALD) of HfO₂-based ferroelectrics are comprehensively reviewed. Several technical issues in the physical scaling of the ferroelectric thin films and potential solutions including advanced ALD techniques including discrete feeding ALD, atomic layer etching, and area selective ALD are introduced.

• Korean Journal of Materials Research
• /
• v.10 no.8
• /
• pp.575-580
• /
• 2000

Diamond thin films were deposited on $Si_3N_4$, SiC, TiC and $Al_2O_3$, substrates by the CVD method using Ta(TaC)Filament, and the appearance of the diamond films and their adhesion properties were examined by SEM, optical microscopy, indentation test and compression topple test. Diamond films were deposited at lower $CH_4$ concentration than 5%$CH_4$ for all kinds of the substrate material, but graphitic(amorphous)carbon was observed at 10%$CH_4$. The diamond film of about $12\mu\textrm{m}$ thickness on WC substrate partly peeled off, but the film on $Si_3N_4$ substrate held good adhesion. The indentation test showed that roughly ground surface was very effective for adhesion of diamond films to substrate. The topple test revealed that film thickness was an important factor governing the adhesion of the diamond film.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.6
• /
• pp.449-453
• /
• 2010

In this paper, the electrical characteristics of Fin-type SONOS(silicon-oxide-nitride-oxide-silicon) flash memory device with different trapping layers are analyzed in depth. Two kinds of trapping layers i.e., silicon nitride($Si_3N_4$) and hafnium oxide($HfO_2$) are applied. Compared to the conventional Fin-type SONOS device using the $Si_3N_4$ trapping layer, the Fin-type SOHOS(silicon-oxide-high-k-oxide-silicon) device using the $HfO_2$ trapping layer shows superior program/erase speed. However, the data retention properties in SOHOS device are worse than the SONOS flash memory device. Degraded data retention in the SOHOS device may be attributed to the tunneling leakage current induced by interface trap states, which are supported by the subthreshold slope and low frequency noise characteristics.

• Proceedings of the Optical Society of Korea Conference
• /
• 1995.06a
• /
• pp.75-83
• /
• 1995

In-situ, 실시간 측정을 위해 상업화 모형의 He-Ne 타원해석기 및 고속 분광 타원해석기(SE, Spectoscopic Ellipsometer)를 제작하였다. 후자의 경우 1024개의 화소를 가진 광학 다채널분석기 (OMA, Optical Multichannel Analyzer)를 이용한 RP형 분광타원해석기로써 1.5∼5.0eV의 측정 파장대역을 가지며, 한 스펙트럼의 측정시간은 약 100msec이다. cos 와 tanΨ의 정확도는 각각 약0.01이하로 측정되었다. 이러한 in-situ 타원해석기들을 사용하여 Au, ZnS 박막들의 성장 초기단계에서의 박막구조의 변화, 성장속도 그리고 HF식각후의 Si 자연산화층(SiO2)의 초기 성장과정을 밝히고 SiO2/c-Si 시료의 온도를 비 접촉적, 비간석적으로 기존의 방법에 의한 결과와 비교하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2009.02a
• /
• pp.105.1-105.1
• /
• 2009