• Proceedings of the Membrane Society of Korea Conference
• /
• 2003.07a
• /
• pp.33-36
• /
• 2003

This research was aimed at developing new catalytic membrane reactors to be used for : i) partial oxidation of toluene (to benzaldehyde and benzoic acid) ii) oxidative dehydrogenation of propane iii) complete oxidation of propane and toluene. The reactor is particularly useful for the optimisation and the industrial development of heterogeneous catalytic processes, particularly for those processes where it is necessary to control the reactants stoichiometry in the reaction zone. This control limits consecutive reactions, thus obtaining high selectivity with industrially interesting conversions. This presentation will concentrate on the partial oxidation of toluene.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.7
• /
• pp.563-567
• /
• 1994

The electroreduction of dioxygen at glassy carbon electrodes with irreversible self-assembly of N-hexadecyl-N'-methyl viologen $(C_{16}VC_1)$ proceeds at potentials more positive than those where the reduction occurs at bare electrodes. The electrocatalyzed reduction takes place at potentials well ahead of those where the catalyst is reduced in the absence of dioxygen and the limiting currents observed at rotating disk electrodes did not deviate from the thoretical Levich line up to 6400 rpm, indicating that the electrocatalysis is extremely rapid. The rate constant for the heterogeneous reaction between $C_{16}V^+C_1$ immobilized on the electrode surface and $O_2$ in solution was estimated to be ca. $10^8\;M^{-1}s^{-1}$. The half-wave potential of dioxygen reduction was independent of solution pH.

• Journal of Oral Medicine and Pain
• /
• v.46 no.2
• /
• pp.63-68
• /
• 2021

Mucous membrane pemphigoid (MMP) is a heterogeneous group of chronic, autoimmune subepithelial blistering diseases, predominantly involving oral mucosal membrane. Because of its pathophysiology of autoimmune reaction, MMP-related gingivitis would not respond to conventional periodontal treatments. We present a case of a 65-year-old female with a chief complaint of chronic generalized buccal gingivitis, unimproved after periodontal treatment for four months. Based on the clinical findings, histological examination, and direct immunofluorescence microscopy, it was diagnosed as MMP. The symptoms were relieved with immunomodulatory therapy using corticosteroids and the supportive management of professional plaque control. MMP can cause pathological involvement throughout the oral and other mucosae of the body, thus leading to functional impairment through repeated inflammatory cascades. Therefore, accurate diagnosis is essential to properly manage local and possible systemic complications of MMP.

• Bulletin of the Korean Chemical Society
• /
• v.13 no.3
• /
• pp.274-279
• /
• 1992

Immobilization method of lariat azacrown ethers, containing hydroxyl group in the side arm of crown ring, on the polymer matrix and the phase-transfer catalytic activity of thus obtained immobilized lariat azacrown ethers were studied. Polystyrene resins with crown ether structures and hydroxyl groups adjacent to the macrorings were prepared by the reaction of crosslinked polystyrene resins containing epoxy groups with monoaza-15-crown-5 or monoaza-18-crown-6. Microporous crosslinked polystyrene resins containing epoxy group for the syntheses of these immobilized lariat crown catalysts were prepared by suspension polymerization of styrene, divinylbenzene (DVB 2%) and vinylbenzylglycidyl ether. The immobilized lariat catalysts with 10-20% ring substitution exhibited maximal activity for the halogen exchange reactions of 1-bromooctane with aqueous KI or NaI under triphase heterogeneous conditions. Immobilized catalyst exhibited higher activity than corresponding catalyst without the hydroxyl group and this result was suggested that the active site have a structure in which the $K^+$ ion was bound by the cooperative coordination of the crown ring donors and the hydroxyl group in the side arm.

• Journal of Industrial and Engineering Chemistry
• /
• v.67
• /
• pp.448-460
• /
• 2018

Copper nanoparticle-doped and graphitic carbon nanofibers-covered porous carbon beads were used as an efficient catalyst for treating synthetic phenolic water by catalytic wet air oxidation (CWAO) in a packed bed reactor over 10-30 bar and $180-230^{\circ}C$, with air and water flowing co-currently. A mathematical model based on reaction kinetics assuming degradation in both heterogeneous and homogeneous phases was developed to predict reduction in chemical oxygen demand (COD) under a continuous operation with recycle. The catalyst and process also showed complete COD reduction (>99%) without leaching of Cu against a high COD (~120,000 mg/L) containing industrial wastewater.

• Journal of the Korean Mathematical Society
• /
• v.58 no.5
• /
• pp.1227-1237
• /
• 2021

This paper is concerned with a reaction-diffusion logistic model. In [17], Lou observed that a heterogeneous environment with diffusion makes the total biomass greater than the total carrying capacity. Regarding the ratio of biomass to carrying capacity, Ni [10] raised a conjecture that the ratio has a upper bound depending only on the spatial dimension. For the one-dimensional case, Bai, He, and Li [1] proved that the optimal upper bound is 3. Recently, Inoue and Kuto [13] showed that the supremum of the ratio is infinity when the domain is a multi-dimensional ball. In this paper, we generalized the result of [13] to an arbitrary smooth bounded domain in ℝⁿ, n ≥ 2. We use the sub-solution and super-solution method. The idea of the proof is essentially the same as the proof of [13] but we have improved the construction of sub-solutions. This is the complete answer to the conjecture of Ni.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.11
• /
• pp.715-720
• /
• 2015

The photoinduced hydrophilicity of $TiO_2/WO_3$ double layer films was fabricated by using a conventional rf-magnetron sputtering method. The photoinduced hydrophilic reaction of the $TiO_2$ surface was enhanced by the presence of $WO_3$ under the $TiO_2$ layer by irradiation of a 10 W cylindrical fluorescent light bulb. However, when the $TiO_2$ and $WO_3$ layers were separated by an insulating layer, the surface did not appeared high hydrophilic, under the same light bulb. The enhanced photoinduced hydrophilic reaction can be explained by the charge transfer between $TiO_2$ and $WO_3$ layers. It was also demonstrated that visible light passing through the $TiO_2$ layer could excite $WO_3$. Thus, visible light can be used for the hydrophilic reaction in the present $TiO_2/WO_3$ system.

• Journal of the Korean Ceramic Society
• /
• v.32 no.1
• /
• pp.83-89
• /
• 1995

YBa2Cu3O7-$\delta$, Y2BaCuO5, and binary compounds in the Ba-Cu-O system with the nominal composition of Ba2CuO3, BaCuO2, Ba3Cu4O7, Ba3Cu5O8 were synthesized to investigate the heat evolutions and crystalline phases in the hydration reaction of orthorhombic YBa2Cu3O7-$\delta$ phase. The observed crystalline phases were YBa2Cu3O7-$\delta$, Y2BaCuO5, and BaCuO2, or Ba2Cu3O5＋x, and some amount of noncrystalline phase in the Ba-Cu system comounds. In contact with distilled water, YBa2Cu3O7-$\delta$ and Y2BaCuO5 did not have considerable heat liberation, but in the binary compounds of the Ba-Cu-O system, the amount of total heat liberation was increased with respect to the Cu content. It might be that the reaction of high temperature superconductor YBa2Cu3O7-$\delta$ with water and/or moisture originated from the unusual oxidation state of Cu ion and the presence of amorphous Ba-Cu oxide compound. The degradation of high Tc superconductor by moisture and water could be controlled by restricting the heterogeneous distribution of Tc comlposition and the formation of second phase, such as stable Y2BaCuO5, and the resulting unstable Ba-Cu oxide compound.

• Journal of the Korean Chemical Society
• /
• v.33 no.6
• /
• pp.651-656
• /
• 1989

The catalytic effects of several phase-transfer catalysts (PTC) on the liquid-liquid heterogeneous nucleophilic displacement reaction of thiocyanate on benzyl chloride have been determined. Reactions followed a pseudo-first order dependency on the benzyl chloride concentration and the observed rate constant $(k_{obsd})$ were linearly related to the concentration of catalyst and varied with variables such as reaction temperature and solvent. The sequences of catalytic activity of the displacement were $NH_4Cl$ < BTMAC < 18-crown-6 < BTEAC < PEG < TBAC < CTMAB. Enthalpies and entropies of activation associated with the displacement were 15∼20 Kcal$mo^{l-1}$, -12∼-29 eu. respectively and the reaction occurs in the interphase comprising of microemulsion.

• Korean Journal of Materials Research
• /
• v.21 no.6
• /
• pp.327-333
• /
• 2011

Nanostructured cobalt materials have recently attracted considerable attention due to their potential applications in high-density data storage, magnetic separation and heterogeneous catalysts. The size as well as the morphology at the nano scale strongly influences the physical and chemical properties of cobalt nano materials. In this study, cobalt nano particles synthesized by a a polyol process, which is a liquid-phase reduction method, were investigated. Cobalt hydroxide ($Co(OH)_2$), as an intermediate reaction product, was synthesized by the reaction between cobalt sulphate heptahydrate ($CoSO_4{\cdot}7H_2O$) used as a precursor and sodium hydroxide (NaOH) dissolved in DI water. As-synthesized $Co(OH)_2$ was washed and filtered several times with DI water, because intermediate reaction products had not only $Co(OH)_2$ but also sodium sulphate ($Na_2SO_4$), as an impurity. Then the cobalt powder was synthesized by diethylene glycol (DEG), as a reduction agent, with various temperatures and times. Polyvinylpyrrolidone (PVP), as a capping agent, was also added to control agglomeration and dispersion of the cobalt nano particles. The optimized synthesis condition was achieved at $220^{\circ}C$ for 4 hours with 0.6 of the PVP/$Co(OH)_2$ molar ratio. Consequently, it was confirmed that the synthesized nano sized cobalt particles had a face centered cubic (fcc) structure and with a size range of 100-200 nm.