• 대한산업공학회지
• /
• 제32권3호
• /
• pp.236-241
• /
• 2006

Monitor height is one of the key factors in the VDT workstation design. Most of the previous studies have focused on traditional VDT workplace where the operators performed data entry or word processing tasks using single monitor. This study aimed to suggest proper monitor height when the main task was monitoring information from different number of information sources. Twelve male students participated in three experiments: single information source (one monitor), two information sources (one monitor and one CCTV), and three information sources (one monitor, one CCTV and a window). Subjects performed monitoring tasks for 10 minutes with 3 different monitor center heights : 89.0 cm (Low), 111.3 cm (Middle), and 124.8 cm (High). Surface EMG signals of five neck muscles, subjective discomfort ratings, preference, and working postures were recorded. Results indicated that the middle height was proper for one monitor condition, but the low monitor height was recommended for more than two information sources.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.422-424
• /
• 2009

본 논문은 반도체 제조 장비 중 몰드 장비에서 슬릿빔을 이용하여 칩 적층 높이를 측정하는 방법을 연구하였다. 본 논문에서는 슬릿빔을 이용한 높이 측정 방법의 기본 원리를 응용하여 반도체 제조 장비 안에 적용하면서 칩의 적층높이 측정 성능을 높이기 위하여 두 가지 방법을 연구하였다. 첫째로, 카메라 노출 시간과 높이 측정 반복성의 관계이며, 둘째는 PCB(Printed Circuit Board)휨 현상에 대한 측정 오류 최소화를 위하여 최소자승법을 응용하여 측정 성능을 향상 시킬 수 있었다.

• 전자공학회논문지
• /
• 제54권3호
• /
• pp.145-149
• /
• 2017

다양한 신장에 따라 높이가 조절되는 저비용 멀티미디어 전자 교탁 시스템을 개발한다. 사용자를 인식하기 위하여 단일 CCD 카메라와 초음파 센서를 이용한다. CCD 카메라로 얻어진 사용자의 이미지로부터 신장을 추정한다. 또한 효과적으로 추정하기 위하여 이미지로부터 신장영역 분할 인식 방법을 사용한다. 추정된 신장에 따라 전자교탁의 높이가 조절되는 제어시스템을 구현하였다.

• 한국전자통신학회논문지
• /
• 제9권3호
• /
• pp.343-350
• /
• 2014

객체 인식은 지능적이고 다양화된 범죄 예방을 위해 감시 시스템에서 중요한 기술이다. 사람의 신체 정보인 키는 대상이 가지고 있는 신체적인 특징으로 신원을 확인하는데 중요한 정보가 될 수 있다. 본 논문에서는 RGB-Depth 카메라, 키넥트를 활용한 새로운 키 추정 방법을 제안한다. 사람의 키를 측정하기 위해 키넥트의 높이를 알고 있는 것으로 가정하고, 키넥트에서 머리와 발까지의 거리를 키넥트의 깊이 정보를 이용하여 사람의 키를 추정한다. 실험을 통하여 제안하는 방법이 실내에서 사람의 키를 추정하는데 효과적임을 확인한다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.438-440
• /
• 2003

This study is introducing a new approach of ATInSAR hologram for modeling wave refraction spectra pattern. TOPSAR data with L$_{-HH}$ and C-vv bands utilized spatial variation of wave refraction. Based on the phase information in along track interferometry, and ATInSAR hologram the quantitative information such swell wave height and spectra energy have been modeled. The phase information in ATInSAR hologram images can be transferred to wave refraction The ATInSAR hologram can be used to investigate the wave refraction pattern along the coastal waters. The fringe information pattern was shown to be useful in modeling wave refaction spectra varaition. The hologram interferometry wave refraction model consists of two sub-models. The purpose of first sub-model is to determine the swell wave height by using ATInSAR. Second sub-model aims to generate the holographic interferometry from the information of two wave spectra which detected by ATInSAR technique. The azimuth cut-off variations along the fringe patterns will be estimated. As azimuth cut-off contains the wave height information which could be used the significant wave height variation in convergence and divergence zone.

• 한국통신학회논문지
• /
• 제29권12C호
• /
• pp.1652-1659
• /
• 2004

본 논문에서는 영상의 기하학 정보를 이용하여 기저 평면에서 움직이는 객체의 높이를 자동으로 측정하는 알고리즘을 제안한다. 기존의 알고리즘은 설정된 위치에서 이동하는 객체의 높이를 각 프레임 마다 사용자 입력을 통해 측정하여 실시간에 이용할 수 없는 문제점이 있다. 이를 해결하기 위해, 입력 영상에서 움직임 객체의 영역을 추출하여 객체의 높이를 자동으로 측정한다. 입력 영상에서 픽셀 정보와 시간적인 정보를 이용하여 움직임 객체를 추출하고 반복적인 계산을 통해 실제와 근소한 객체의 바닥점과 높이점을 추출한다 이 두 점 사이의 높이 계산은 기하학정보인 소실점(Vanishing point), 소실선(Vanishing line)과의 계산을 통해 이루어진다. 측정된 높이는 신뢰도 평가를 통해 모의실험에서 실제 높이와 유사한 결과를 확인하였다.

• 한국운동역학회지
• /
• 제22권4호
• /
• pp.405-411
• /
• 2012

The purpose of this study was to determine the effects of landing height information on landing strategy during a drop landing. Ten healthy male subjects(age: $22.1{\pm}1.9year$, height: $178.4{\pm}7.8cm$, mass: $75.3{\pm}9.4kg$) participated in this study. Each participant was asked to jump with both legs off a 40 cm high box on one of the three plates with different thickness (0 cm, 13 cm, 26 cm). In the first condition, subjects were given both cognitive and visual information about the jumping heights. In the second, they were given only cognitive information without visual one, and in the third, no information about the height was provided to subjects. (Only the data collected from the 40 cm height landing were analyzed and reported in the present study.) The results showed that landing strategies during a double-leg drop landing from 40 cm height were not significantly affected by visual and cognitive information blockages. Also, there were no statistically significant differences in landing strategies between the three conditions even though the mean differences attained in this study seemed to warrant further studies investigating the relationship between landing strategies and cognitive information.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.676-679
• /
• 2006

Mangrove crowns were delineated using active sensor LIDAR (LIght Detection And Ranging) data by a crown delineating model developed in this study. LIDAR data were acquired from airborne survey by a helicopter for the estuary of Macouria in the northeast coast of French Guiana. The canopy height image was derived from LIDAR vector data by calculating the difference between ground and non-ground data. The mangrove site in the study area was classified to three sectors by the time of mangrove settlement; Mangrove 1986, 2002 and 2003. The estimated crown of Mangrove 1986 was reliable defined for their size, number and volume because of larger crown size and bigger variation of crown height. The tree crown size of Mangrove 2002 and 2003 by the model was overestimated and the number of trees was much underestimated. The estimated crown was not for single crown but a crown group due to homogenous crown height and spatial resolution of LIDAR data. However the canopy height image derived from LIDAR data provided three-dimensional information of mangroves.

• 대한원격탐사학회지
• /
• 제21권5호
• /
• pp.383-392
• /
• 2005

Vegetation classes, especially grass and tree classes, are often confused in classification when conventional spectral pattern recognition techniques are used to classify urban areas. This paper reports on a study to improve the classification results by using an automated process of considering height information in separating urban vegetation classes, specifically tree and grass, using three-band, high-spatial resolution, digital aerial imagery. Height information was derived photogrammetrically from stereo pair imagery using cross correlation image matching to estimate differential parallax for vegetation pixels. A threshold value of differential parallax was used to assess whether the original class was correct. The average increase in overall accuracy for three test stereo pairs was $7.8\%$, and detailed examination showed that pixels reclassified as grass improved the overall accuracy more than pixels reclassified as tree. Visual examination and statistical accuracy assessment of four test areas showed improvement in vegetation classification with the increase in accuracy ranging from $3.7\%\;to\;18.1\%$. Vegetation classification can, in fact, be improved by adding height information to the classification procedure.

• Journal of Mechanical Science and Technology
• /
• 제14권7호
• /
• pp.744-751
• /
• 2000

To achieve lower flying height for high areal recording density, the laser zone texturing of the disk needs to be designed to reduce glide height. One problem of the laser bump design is that the regular laser bump pattern often produces glide resonance phenomenon, which leads to failure of the glide height test. However, it was found in this study that glide resonance is an intrinsic problem of the glide head used and resonance phenomenon depends on the type of the head slider, that is, the natural frequency of the slider body. Therefore, higher glide height or glide failure caused by glide resonance does not lead to head/media interface problem in the real drive operating conditions in which the data head is used. Pseudo-random bump pattern greatly reduces the glide resonance. Smaller bump pitch will also help to reduce the glide resonance. However, as bump spacing becomes smaller, glide height will be increased due to increased air pressure developed around the bumps. Lowering bump height is the most effect way to reduce glide avalanche.