• 보건교육건강증진학회지
• /
• 제8권2호
• /
• pp.74-86
• /
• 1991

This study tried to clear the characteristics of height growth pattern depending on Peak Height Velocity age in early, average and late groups. And in it, height growth tendency of girl students in age 7 to 18 years old was compared and investigated in order to know influencing factors, menarcheal age relation. The samples were senior girl students at high school in Seoul. Longitudinal data and survey data were collected in August, 1990. The results could be summarized as follows: 1. On distance curve, the height growth line in early group tended to be the highest and in late group the lowest. On the other hand, on velocity curve late group showed the highest peak and early group showed the lowest peak. In late group, velocity curve was too steep. Of course, these early, average and late groups were classified by PHV age. 2. In these three groups, late group showed the most growth amount per year. However, on distance curve, early group showed higher line than late group. Perhaps this means that peak growth amount in late group might have an effect on mean. 3. Growth amount of adolescence spurt age in these three groups was 6.86cm at age 9(early group), 7.27cm at l1(average group) and 7.65cm at 13(late group). In early group, because. PHV age came too early, it was difficult to find exact adolescence spurt period. In early group, the adolescence spurt period is considered to come at about age 7 to 9. In average group, at 9 to 11 and at 12 to 13 in late group. Especially, spurt of late group was remarkable. 4. When the growth amount of PA, before PA and after PA was compared, growth amount of PA in all three groups was about 20%. In early group, growth amount of APV tended to be large and in late group, that of APV tended to be large and in late group, that of BPV was large. In average group, growth amount of BPV was larger than that of APV. 5. For the purpose of comparing total height growth amount of these groups at age 18, the height growth was assumed to be over. And then, the difference of three groups was studied but it's not significant. 6. Although the difference between height growth and family environment, dietary habits, exercise, disease history in these three groups was investigated, only the income was significant. The significance of all the other factors was not approved. 7. When menarcheal age was compared with PA, generally we know menarche appeared after 1∼2 years of PHV age. But in case of early group, the difference between PHV age and menarcheal age was 5.34 years. In average group, 2.45 years and 0.82 years in late group.

• 생물환경조절학회지
• /
• 제31권2호
• /
• pp.90-97
• /
• 2022

본 연구는 블루베리를 재배하는 12-단동-1 규격의 온실에서 자연환기 시 측창 개폐 높이에 따른 온실 내외부 온습도 환경변화를 통계적으로 구명하기 위해 수행되었다. 측창 개폐 높이는 120, 100, 80, 60cm로 설정하였으며, 높이별 온실 내외부 온습도 차이의 변화를 주야간별로 비교·분석하였다. 또한 측창 개폐 높이에 따른 온습도 변화의 유의성을 검증하기 위해 One-way ANOVA을 수행하였다. 주간 실내외 기온차의 경우 측창 개폐 높이가 60cm에서 120cm로 높아질 때 실내외 기온차는 약 14.0℃에서 7.1℃로 감소했으며, 야간 실내외 기온차는 측창 개폐 높이와 상관없이 0.2℃ 미만이었다. 측창 개폐 높이별 주간 기온차의 유의성을 분석한 결과, 모든 높이에서 유의성이 확인되었다. 상대습도의 경우, 측창 개폐 높이가 120cm에서 60cm로 낮아질 때 실내외 상대습도 차이는 약 -13.8%에서 -22.2%로 증가하였으며, 야간 상대습도 차이는 높이와 상관없이 1% 미만으로 측정되었다. 측창 개폐 높이별 주간 상대습도 차이의 유의성을 분석한 결과, 그룹 대부분에서 상대습도 차이의 유의성이 확인되었지만 100cm와 80cm 사이에서는 통계적 유의성이 발견되지 않았다. 이는 측창 개폐 높이가 80cm일 때 외기온이 상대적으로 낮아졌기 때문으로 판단된다.결과적으로 본 실험을 통해 측창 개폐 높이가 높을수록 원활한 환기로 인해 내외부 온습도 차이가 줄어드는 경향을 확인하였으며, 측창 개폐 높이가 온습도 차이에 유의한 영향을 미친다는 사실을 실증적으로 확인하였다. 본 연구는 온실 내외부 온습도 차이에 따른 효과적인 측창 개폐 높이를 결정하는 데 필요한 기초 자료로 활용될 수 있을 것으로 기대된다.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.31-34
• /
• 2002

In this study, thermal analysis of a thermal capacitor, which is used to cool the current lead in conduction-cooled superconducting systems, was done. The temperature difference across a thermal capacitor was calculated by using heat conduction equation. Effect of heat load, total thickness, height and length of a thermal capacitor on the temperature difference were show. Using the results in this work, total thickness and heat height of a thermal capacitor can be determined for given heat load and given temperature difference. This work can be used practically in design for every superconduction system using a current lead.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2002년도 학술발표회 발표논문집
• /
• pp.205-208
• /
• 2002

This study is performed to examine the flowability and filling ability of steel fiber reinforced high performance concrete. For the estimation of the flowability and filling ability, slump flow, box height difference and L-shape filling appearence are measured and compared. The test result shows that the slump flow is $60{\pm}5cm$ to make no difference with containing steel fiber, box height difference is increased with increasing steel fiber and L-shape filling appearence is to bad with increasing steel fiber. But, proper containg of steel fiber is considered to be applied for high performance concrete without decreasing of slump flow and filling ability.

• 한국엔터테인먼트산업학회논문지
• /
• 제14권7호
• /
• pp.519-528
• /
• 2020

본 연구의 목적은 보행보조차 손잡이 높이에 따른 노인들의 상태불안과 심박수, 낙상효능감의 변화를 분석하는 데 있다. 연구대상은 정상노인 32명이다. 보행보조차는 유모차 형태로 손잡이 높이를 대상자들의 신장의 48%를 기준으로 설정하였으며, 손잡이 높이를 5%씩 감소시켜, 48, 43, 38 %로 구성하였다. 상태불안 평가는 한국판 상태불안 척도를 활용하였으며, 심박수 평가는 Fitbit Charge 2 손목형 심박수 측정기를 활용하였다. 낙삭효능감 평가는 한국판 낙상효능감 척도를 활용하였다. 그 결과, 보행보조차 손잡이 높이에 따라 상태불안과 심박수는 통계적으로 유의미한 증가가 나타났으며, 낙상효능감은 통계적으로 유의미한 감소가 나타났다. 사후검정 결과에서도 상태불안과 낙상효능감의 분석결과 각각의 보행보조차 손잡이 높이에 따라 통계적으로 유의미한 차이가 나타났으며, 심박수의 분석결과 48, 43%의 손잡이 높이와 38%의 손잡이 높이 간의 통계적으로 유의미한 차이가 나타났다. 따라서, 노인들의 보행보조차 사용시 상태불안과 심박수를 감소시키고 낙상효능감을 향상시키기 위해서, 보행손잡이 높이를 적절하게 위치하여야 할 것이며, 보행보조차 사용자 전체 신장의 48%의 위치로 조정하여야 할 것이다.

• 한국환경과학회지
• /
• 제21권9호
• /
• pp.1097-1113
• /
• 2012

Ozone is the secondary photochemical pollutant formed from ozone precursor such as nitrogen dioxide and non-methane volatile organic compounds(VOCs). The ambient concentration of ozone depends on several factors: sunshine intensity, atmospheric convection, the height of the thermal inversion layer, concentrations of nitrogen oxides and VOCs. Busan is located in the southeast coastal area of Korea so the ozone concentration of Busan is mainly affected from the meteorological variables related to the sea such as sea breeze. In this study the ozone concentrations of Busan in 2008~2010 were used to analyse the cause of the regional ozone difference in eastern area of Busan. The average ozone concentration of Youngsuri was highest in Busan however the average ozone concentration of Gijang was equal to the average ozone concentration of Busan in 2008~2010. The two sites are located in eastern area of Busan but the distance of two sites is only 9km. To find the reason for the difference of ozone concentration between Youngsuri and Gijang, the meteorological variables in two sites were analyzed. For the analysis of meteorological variables the atmospheric numerical model WRF(Weather Research and Forecasting) was used at the day of the maximum and minimum difference in the ozone concentration at the two sites. As a result of analysis, when the boundary layer height was lower and the sea breeze was weaker in Youngsuri, the ozone concentration of Youngsuri was high. Furthermore when the sea breeze blew from the south in the eastern area of Busan, the sea breeze at Youngsuri turned into the southeast and the intensity of sea breeze was weaker because of the mountain in the southern region of Youngsuri. In that case, the difference of ozone concentration between Youngsuri and Gijang was considerable.

• 대한산업공학회지
• /
• 제24권2호
• /
• pp.167-173
• /
• 1998

Many workers like welders work in squatting postures with the object on the ground during an entire work shift. It is suspected that such prolonged squatting without any supporting stool would gradually cause musculoskeletal injuries to workers. This study is to examine the physical stress caused by the prolonged squatting and to recommend a safe work/rest schedule for a welding task with squatting posture based on the lab experiments. In this study, 8 healthy student subjects participated in the experiment. They maintained a squatting work posture for 16 minutes with 4 different stool height conditions: no stool; 10cm height; 15cm height; and 20cm height. Every 2 minutes, the discomfort was subjectively assessed with the magnitude estimation method for the whole body, lower back, upper leg and lower leg. Based on discomfort ratings, we found that a 10cm height stool relieved the workload most. Discomfort rating results also indicated that a 20cm height stool showed the highest workload, and the there were no difference in workload between a 15cm height stool and no stool. We recommend to use low height stools and to maintain such working postures no longer than 6 minutes for prolonged squatting tasks.

• 한국초지조사료학회지
• /
• 제14권4호
• /
• pp.295-306
• /
• 1994

The object of this experiment was to suggest the suitable cutting frequency and cutting height for orchardgrass (0G)-red clover(RC) mixtures under the intensive system of short-term pasture utilization. The fields trials were conducted over 3-year period(1991-1993) to evaluate dry matter yield, botanical composition, chemical composition and CP, DDM yield on the cutting frequency (30, 40 and 50 days) and cutting height(5, 7 and 9cm) With decreasing the cutting frequency, the DM yield of OG in the OG-RC mixtures was significantly increased(P

• 디지털콘텐츠학회 논문지
• /
• 제7권1호
• /
• pp.9-14
• /
• 2006

본 논문에서는 보안 시스템에서 사람 인식을 위한 중요한 단서 중의 하나인 사람의 키를 측정하는 알고리즘으로, 이미지 시퀀스에서 사람의 영역을 추출하고 기하학적 정보를 이용해 추출된 사람의 키를 측정하고자 한다. 이를 위해 단일 이동 물체 사람을 대상으로 하여 시퀀스 이미지에서 사람의 움직임 정보를 추출하고, 추출된 영역에서 수직히스토그램 투영을 하여 사람의 중심선을 찾아 머리와 발의 좌표점을 추출한다. 추출된 좌표점들은 소실점과 소실선의 기하학적 해석과 미리 입력한 다른 물체의 기준 높이를 가지고 실세계에서의 사람의 키를 측정하게 된다.

• 한국의류학회지
• /
• 제13권1호
• /
• pp.49-58
• /
• 1989

A clothing-erogonomics study was performed to investigate the difference of the upper arm skin skin surface and the relationship among the three aspects of upper arm (height of sleeve rap, sleeve width and armhole girth) by changing arm movements. Plaster cast was used for this experimental research. Arm movements consist of 9 types; just carmly standing on ($0^{\circ}$), and each 4 types ($45^{\circ},\;90^{\circ},\;135^{\circ},\;180^{\circ}$) to the vertical direction in front and in side. The results were as follows; 1) As the arm-movement angle increased, the height of sleeve cap decreased and that ratio was largest in the portion A-B3. 2) The steeve width was enlarged with the increment of movement angle in all portions of upper arm except B1-B5. 3) As increasing the movement angle, the whole armhole girth decreased and the ratio o(front armhole girth (F-A) was larger than that of back. 4) In the vertical direction in front, the height o( the sleeve caps was larger, the sleeve widths were smaller than in the vertical direction in side in all movement types, but there was no significant difference in arm-hole girth between the two cases. 5) There were significantly negative relationships between measurements in height of sleeve cap and those in sleeve width, and also between those in height of sleeve cap and in arm-hole girth. And significantly positive relationships were found between neasurements in height of sleeve cap and those in arm-hole girth.