• 제목/요약/키워드: Height Adjustment

검색결과 166건 처리시간 0.022초

초저속 후방 추돌시 BioRID-II를 이용한 목 상해 지수 측정에 관한 연구 (A Study on the Neck Injury Criteria Using BioRID-II during Very Low Speed Rear-end Collision)

  • 홍승준;유한규;김영은
    • 한국자동차공학회논문집
    • /
    • 제21권4호
    • /
    • pp.54-61
    • /
    • 2013
  • Although typically classified as AIS 1, whiplash injuries continue to represent a substantial social problem with associated costs estimated at over $1 billion annually. The primary objective of this study was to determine the effects of seat positions(seatback angle, headrest height) on risk for whiplash injury in very low speed(${\Delta}V$=4~10km/h) rear-end impact. To accomplish this, rear impact seat carriage tests and simulations were conducted using the BioRID-II dummy seated in a mass production seat, which allowed for the adjustment of seatback angle and headrest height. Neck injury criteria(NIC, Nkm) were then compared for different ${\Delta}V$ and seat positions.

높이 조절식 맨홀 개발에 관한 연구 (A Study on Development of a Manhole with Height Adjustment)

  • 김창호;박준홍
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2004년도 춘계학술대회
    • /
    • pp.710-715
    • /
    • 2004
  • There are a lot of manholes such as for water supply, sewage, telecommunication cable, traffic sign, electricity supply, and rainwater, etc. Conventional manholes installed on a road are impossible to adjust height, so that they should be entirely excavated to reinstall or repair. This entire excavation of a manhole causes too much time-consuming work, waste of resources, and obstruction of traffic. In this study, in order to solve the above mentioned problems, a cover, outer and inner parts of a manhole are integrated by gear-shaped parts located between outer and inner parts of a manhole. Mechanical design is performed to determine dimension of gear-shaped parts by Taguchi orthogonal array table. Cast molds for a gear-shaped manhole are also manufactured.

  • PDF

Correlation Between the Height and the Subjective Discomfort Ratings and Muscle Performance at performing the Lower Arm's Pronation and Supination according to the Changes in Height of Working Table

  • Yoo, Kyung Tae;Choi, Jung Hyun;Kim, Hee Jung;Lee, Bom;Jung, Jea Wook;Choi, Wan Suk;Yun, Young Dae;Kim, Soon Hee
    • 국제물리치료학회지
    • /
    • 제3권2호
    • /
    • pp.469-474
    • /
    • 2012
  • The purpose of this study is to analyze the correlation between the stature and the muscle performance ratings and the subjective discomfort rations at performing lower arm's pronation and supination according to change sin the height of working table for more efficient performance at designing a working table and performing a work. For the purpose, this study conducted an experiment targeting 40 people in their 20s, who were classified into 4 groups each group composing 10 people at intervals of 5cm from the standard stature of 166.5cm. The experiment measured the maximum isometric pronation and the supination muscular power, and at measuring the factors, the heights of working tables were set as 800mm, 850mm, and 900mm. From the measurement results, it was found that the stature and the maximum muscular power was correlated. That is, as the experiment groups's average stature is higher, the maximum muscular power was higher. For the correlation between the motion patterns(pronation and supination) and the maximum muscular power, it was seen that the maximum muscular power was higher at performing the pronation than the supination. In the correlation between motion patterns and the subjective discomfort ratings, it was seen that the subjective discomfort rating was higher at performing the supination than the pronation. For the correlation between height adjustment and the subjective discomfort ratings, as the height of working table was lower, the subject discomfort rating was lower. Therefore there was no difference in the maximum muscular power according to the height changes of working table, but it was found that as the working table was higher, the user felt more comfortable.

Comparison of tropical cyclone wind field models and their influence on estimated wind hazard

  • Gu, J.Y.;Sheng, C.;Hong, H.P.
    • Wind and Structures
    • /
    • 제31권4호
    • /
    • pp.321-334
    • /
    • 2020
  • Engineering type tropical cyclone (TC) wind field models are used to estimate TC wind hazard. Some of the models are well-calibrated using observation data, while others are not extensively compared and verified. They are all proxies to the real TC wind fields. The computational effort for their use differs. In the present study, a comparison of the predicted wind fields is presented by considering three commonly used models: the gradient wind field model, slab-resolving model, and a linear height-resolving model. These models essentially predict the horizontal wind speed at a different height. The gradient wind field model and linear height-resolving model are simple to use while the nonlinear slab-resolving model is more compute-intensive. A set of factors is estimated and recommended such that the estimated TC wind hazard by using these models becomes more consistent. The use of the models, including the developed set of factors, for estimating TC wind hazard over-water and over-land is presented by considering the historical tracks for a few sites. It is shown that the annual maximum TC wind speed can be adequately modelled by the generalized extreme value distribution.

Towards guidelines for design of loose-laid roof pavers for wind uplift

  • Mooneghi, Maryam Asghari;Irwin, Peter;Chowdhury, Arindam Gan
    • Wind and Structures
    • /
    • 제22권2호
    • /
    • pp.133-160
    • /
    • 2016
  • Hurricanes are among the most costly natural hazards to impact buildings in coastal regions. Building roofs are designed using the wind load provisions of building codes and standards and, in the case of large buildings, wind tunnel tests. Wind permeable roof claddings like roof pavers are not well dealt with in many existing building codes and standards. The objective of this paper is to develop simple guidance in code format for design of loose-laid roof pavers. Large-scale experiments were performed to investigate the wind loading on concrete roof pavers on the flat roof of a low-rise building in Wall of Wind, a large-scale hurricane testing facility at Florida International University. They included wind blow-off tests and pressure measurements on the top and bottom surfaces of pavers. Based on the experimental results simplified guidelines are developed for design of loose-laid roof pavers against wind uplift. The guidelines are formatted so that use can be made of the existing information in codes and standards such as American Society of Civil Engineering (ASCE) 7-10 standard's pressure coefficients for components and cladding. The effects of the pavers' edge-gap to spacer height ratio and parapet height to building height ratio are included in the guidelines as adjustment factors.

The relationships of body mass index, waist-to-height ratio, and body fat percentage with blood pressure and its hemodynamic determinants in Korean adolescents: a school-based study

  • Kim, Na Young;Hong, Young Mi;Jung, Jo Won;Kim, Nam Su;Noh, Chung Il;Song, Young-Hwan
    • Clinical and Experimental Pediatrics
    • /
    • 제56권12호
    • /
    • pp.526-533
    • /
    • 2013
  • Purpose: Obesity is an important risk factor for hypertension in adolescents. We investigated the relationship of obesity-related indices (body mass index [BMI], waist-to-height ratio [WHR], and body fat percentage [%BF]) with blood pressure and the hemodynamic determinants of blood pressure in Korean adolescents. Methods: In 2008, 565 adolescents, aged 12-16 years, were examined. The %BF of the participants was measured by bioelectrical impedance analysis. Echocardiography and brachial artery pulse tracing were used to estimate the stroke volume (SV), cardiac output (CO), total vascular resistance (TVR), and total arterial compliance (TAC). Results: We noted that BMI, WHR, and %BF were positively correlated with systolic blood pressure (SBP) and diastolic blood pressure (DBP). The positive correlation between BMI and blood pressure (SBP and DBP) persisted after adjustment for WHR and %BF. However, after adjustment for BMI, the positive associations between blood pressure (SBP and DBP) and WHR as well as %BF, were not noted. With regard to the hemodynamic factors, BMI, but not WHR and %BF, was an independent positive factor correlated with SV and CO. TVR had an independent negative association with BMI; however, it was not associated with WHR or %BF. Moreover, we noted that BMI, WHR, and %BF did not affect TAC. Conclusion: In Korean adolescents, BMI had an independent positive correlation with SBP and DBP, possibly because of its effects on SV, CO, and TVR. WHR and %BF are believed to indirectly affect SBP and DBP through changes in BMI.

GPS/Leveling의 실용적 활용 방안에 관한 연구 (The Research for Practical Use of GPS/Leveling)

  • 박병욱;최윤수;신상호
    • 대한공간정보학회지
    • /
    • 제10권2호
    • /
    • pp.107-114
    • /
    • 2002
  • 본 연구에서는 홍성지역의 수준점 및 삼각점에서 GPS 측량을 실시한 후 EGM96, OSU91A, KGEOID99 등의 지오이드모델 기반에서 정표고를 산정한 것과, 기지점 고정의 망조정에 의한 정표고 산정을 상호 비교하여, GPS/Leveling을 수준측량으로 적용할 수 있는 한계와 그 정확성을 평가함으로써 GPS/Leveling의 실용화를 위한 연구를 하였다. 기존 지오이드모델에 의한 정표고 산출 결과, RMSE는 $EGM96\;{\pm}0.061m,\;OSU91A\;{\pm}0.725m,\;KGEOID99\;{\pm}0.598m$로 EGM96 지오이드모델에 의한 결과가 가장 양호한 것으로 나타났다. GPS 망조정 결과에서는 수준점 3점 고정시 ${\pm}0.043m$의 RMSE를 나타내 고정점을 이용한 망조정이 효과적인 GPS/Leveling 방법으로 활용될 수 있음을 알 수 있었다. 수준측량의 허용오차를 감안할 때, GPS/Leveling은 공공측량시 4급 수준측량, 공공기준점의 표고 결정 등에 활용이 가능하다고 판단된다.

  • PDF

Association Between Infants Anthropometric Outcomes With Maternal AHEI-P and DII Scores

  • Zahra Roumi;Abolghassem Djazayery;Seyed Ali Keshavarz
    • Clinical Nutrition Research
    • /
    • 제12권2호
    • /
    • pp.116-125
    • /
    • 2023
  • The present study sought to examine the association between an infant's anthropometric outcomes with maternal Dietary Inflammatory Index (DII) and Alternate Healthy Eating Index for Pregnancy (AHEI-P) scores during the third trimester of pregnancy. This prospective cohort study was applying 130 pregnant women, at the pregnancy training center in west Tehran, Iran (November 2020 to July 2021). The maternal dietary intake, and body mass index (BMI), and social economic level were evaluated. The data about birth weight, birth height, head circumference, and, gestational age at birth were extracted from each child's health records. The ultimate sample included 122 (93.8%) pairs of women/newborn children. The participants, mean age was 28.13 ± 4.66 years with gestational age between 28 to 40 weeks and the mean of BMI was 24.62 ± 3.51. Our outcomes, after adjustment for confounding factors, suggested that those newborn infants in the highest quartile of maternal DII score had a significantly lower weight (p < 0.001) and height (p = 0.05), in comparison to those in the lowest quartile, but not head circumference (p = 0.18). Moreover, after adjustment for confounding factors, results suggested that those newborn infants in the First quartile of maternal AHEI-P score had a significantly lower weight (p = 0.018) and, in comparison to those in the higher quartile. It appears that newborn infants with lower maternal DII and higher AHEI-P scores may have a better anthropometric outcome. Further longitudinal and in-depth qualitative and quantitative studies, with a longer-term follow-up, is warranted to support the integrity of our outcomes.

골반변위와 대퇴골두 높이차이에 대한 상관성 비교 - Gonstead's Technique을 중심으로 - (Ananlysis of Correlation between Functional Leg Length Discrepancy caused by Pelvic tilting and Femur head height difference)

  • 이경윤;서진우;박쾌환;박민정
    • 대한추나의학회지
    • /
    • 제5권1호
    • /
    • pp.213-222
    • /
    • 2004
  • Objectives : To investigate contributing degree of other factors except pelvic tilting to F.L.L.D by analizing with Gonstead technique on the correlation between femur head height discrepancy on the standing pelvic AP view and F.L.L.D caused by pelvic tilting. Method : We analysed standing pelvis AP X-ray of 70 patients who had visited at the department acupunture and moxibustion in Conmaul oriental medical hospital, during May, 1st, 2004 - July, 30th, 2004, with low back pain or lower extremity pain. We excluded the person with any past history of polio, genetic defect, malunited fracture, growth plate injury, infection and overgrowth attributable to hemangioma, or arteriovenous fistula. Results & Conclusion : The functional leg length discrepancy caused by pelvic tilting and femur head height difference had no statistical difference(p=0.132) but poorly correlated(Pearson ${\nu}=0.05$). In the 94.28% of subjects, the femur head height difference wasn't in accord with F.L.L.D. caused by pelvic tilting. In 47.14% of subjects were expected to have over $3^{mm}$ of leg length discrepancy after pelvic adjustment. The mean of measurement difference between two methods was $3.76{\pm}3.12^{mm}$ and the range was $0{\sim}11.4^{mm}$. Consequently, we must consider not only functional leg length discrepancy caused by pelvic tilting but also anatomical leg length discrepancy, misalignment of ankle, knee or hip joint etc.

  • PDF

도심지역 수목 높이값 측정을 위한 무인항공기에서 취득된 스테레오 영상의 활용 가능성 고찰 (A Study on the Possibility of Using UAV Stereo Image for Measuring Tree Height in Urban Area)

  • 이수암;김수현;김태정
    • 대한원격탐사학회지
    • /
    • 제33권6_2호
    • /
    • pp.1151-1157
    • /
    • 2017
  • 가로수는 도시 환경 개선을 위한 중요한 개체이다. 특히 도시 협곡에서 가로수 높이는 대기 오염물질의 제거에 큰 영향을 미치는 요소로써 높이를 정확히 측정해야할 필요가 있다. 본 연구에서는 수목의 높이 측정을 위해 대상지역의 무인항공기 영상을 정밀하게 보정하여 스테레오 영상 기반으로 수목의 높이를 추출하는 방식을 시도해보았다. 무인항공기의 영상 정렬은 공선방정식 기반의 SfM(Structure from motion) 방식을 적용하였으며 보정된 영상을 수치도화기에 적용하여 도시 협곡지역의 가로수 높이를 측정하였다. 가로수와 인접 건물의 높이를 함께 취득하였으며 정확한 지물의 높이 계산을 위해 도로면의 평균높이를 함께 산출하여 처리하였다. 그 결과로 수목의 높이 측정 및 건물과의 상대적인 높이값 차이 산출을 수치도화기를 이용한 육안 분석을 통해서 빠르게 할 수 있음을 확인하였다. 이는 무인항공기를 이용하여 별도의 3차원 포인트 클라우드를 제작하지 않고도 건물과 수목의 상대적인 높이 차이를 산출할 수 있음을 의미한다. 또한 비전문가도 활용할 수 있다는 장점이 있다. 향후 사용자가 영상 내 수목이나 건물의 한 지점을 선택하면 자동으로 해당 개체의 높이값을 추출하는 연구 및 영상에서 자동으로 수목을 추출한 뒤 수고가 함께 취득되는 연구가 수행되어야 하며, 이러한 기술의 개발 및 연구는 이후 도심지내 환경 정책 및 가로수 등의 현황파악에 도움이 될 수 있을 것으로 기대된다.