• Progress in Medical Physics
• /
• v.20 no.2
• /
• pp.106-111
• /
• 2009

Total scatter factor ($S_{cp}$), head scatter factor ($S_c$) and phantom scatter factor ($S_p$) are very important for accurate radiation therapy at stereotactic radiosurgery (SRS) with irregular field shape using micro-MLC and intensity modulated radiation therapy (IMRT) including many small field sizes. In this study we measured and compared $S_{cp}$ with reference ion chamber, pinpoint chamber and diode detector and adapted the resuls form diode detector. Head scatter factors for small field sizes were also measured with diode detector covered 1.5 cm-thick solid water build-up cap. Some errors like as electron contamination of 1~3% were included in the values of Sc but trend of total results of $S_c$ was coincided with basic theory. Phantom scatter factors for small field sizes were calculated form $S_{cp}$ and $S_c$. The results of $S_p$ were compared and were well-agreed with those of other authors.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.29 no.2
• /
• pp.102-107
• /
• 2003

At orthodontic treatment, we have made every effort to get rigid anchorage which is not stirred when teeth move. As a result, the miniscrew that is rigid anchorage was invented recently, and now it is used widely. Concerning the advantage of miniscrew, it is reduced dependence of extraoral anchorage and it shortens treatment time for rapid tooth movement. In contrast, the defect of miniscrew is falling off it resulted from increasing of the mobility. So the purpose of this research is to be of help to prognose clinical use of miniscrew, which is inserted for intraoral anchorage, by investigating and comparing the failure rate of miniscrew for loading time. This study researches the failure rate of miniscrew for teeth movement at the orthodontic treatment. The failure rate of miniscrew in mid course, after inserting 147 miniscrews in 51 patients, is 13%(20/147). It showed no statistically significant differences as compared man with woman, maxilla with mandible, double-head with uni-head miniscrew, and drilling and non-drilling before inserting the miniscrew. In comparison below twenties with over twenties and the times that we give load to miniscrew, it produced that the failure rate of miniscrew is 9.7% higher in the case of below the twenties than over the twenties. Also, the failure rate of loading immediately is 10.8% higher than loading after 7 days. According to using driver for the insertion of miniscrew, the failure rate of miniscrew is higher in the case of using machined driver than in the case of using hand driver when the level of significance is 95%. According to the research, we can suppose that the failure rate has no concern with using miniscrew on man or woman, maxilla or mandible, the shape of head, and drilling or non-drilling before insertion of miniscrew. Therefore, we can choose eclectic miniscrew as demands. In addition, we must notify the patient, below twenties, to be possibility of high failure rate. And It is strongly recommended to give load after $1{\sim}2$ weeks for healing of the insertion area.

• The Research Journal of the Costume Culture
• /
• v.12 no.5
• /
• pp.859-879
• /
• 2004

As a result of research, the characteristics of the general costumes from the king Young-Cho period to the king Jung-Cho period in Genre Paintings of Mung-Hyun Oho, Yong Yun, In-Sang Lee, Hee-Eon Kang follows. First, the typical man wore his hair in a topknot(sangtu), and put on 'Bung-gu-ji', 'Lip', or a scarf on his head. The length of the 'Jeogori'(Korean traditional jacket) was long enough to cover the waist. Dress for work had side slits, and had half length sleeve Jeogori, and short pants looked like 'Jam-bang-i'. They went barefoot and wore 'Jipsin'(Korean traditional straw shoes). Dress for outdoor was 'Po' that knot at front of chest by band. 'Baji'(slacks) were with knot below knee, worn 'Hang-jun'(ankle band) and the width of slacks was suitable. They were 'Beoseon'(Korean traditional socks) and shoes. Second those in the upperc1ass and those in the military put on 'Mang-geon', 'Gat', 'Sa-bang-gan', 'Tang-geon', 'Bok-geon' on their head on a topknot. Most of them wore 'So-chang-i', 'Jung-chi-mag' or 'Do-po'. The length of Jeogori covered the waist or the hip and were tied with 'Go-rum'(ribbon). Baji was tied with Hang-jun and 'Dae-nim'. The waist of the slacks were tied with a dark colored waist-band and folded down their waist of slacks. They wore white color Beoseon and 'Hye' or dark color leather shoes. They wore 'Sup'(assistant of arm) for bow. It showed the lifestyle of the 18C with fan, 'Be-ru', 'Mug', 'Yun-jug', teacup, pot, etc. Third, child's hair was short or knotted to the back of the head. The length of Jeogori reached waist line, Git of Jeogori was 'Dunggurai-Kit'(shape of round) and other style Jeogori, which reached the hip line, had side-slit. Baji was tied with Dae-nim, and the width of the slacks is suitable. They hang 'Yum-nang'(Pocket). Final, most women worked outdoors wearing their hair in a high twisted style, or covered it with scarf. They wore Jeogori and 'Chima'(Korean traditional skirts), Bagi. They folded up the sleeves of the Jeogori. And they folded the 'Jambang-i-styled' pants to just above the knees, fastening at the waist. When they wore skirts, they also wore underpants under the skirt that went down to the knees. Most of them went barefoot and wore straw shoes, Jipsin. Through genre paintings, we can understand the ways and forms of our ancestor's clothing. And with our understanding, interest, and passion, we can be familiar with Hanbok in our daily life by succeeding and creating its peculiar style. And then we can promote the globalization of Hanbok.

• Journal of Veterinary Clinics
• /
• v.11 no.2
• /
• pp.529-537
• /
• 1994

Sector scanner which has a conical end is used to image through the intercostal space because heart is protected by the ribs. Cardiac data published all around the world were also obtained by sector scanner. Although scanners being used in every small animal practice and animal hospital at college in Korea include convex ape and linear type, linear type is not appropriate f3r cardiac scan because of a wide contact surface. The purpose of this study is to establish ultrasonographic images of normal cardiac structures by measuring shape, size of reflectable cardiac structure according to restraint position in scanning normal heart of the puppies with 6.5 MHz convex scanner(SonoAce 4500, Medison, Korea) used in our veterinary teaching hospital, Seoul national university. Seventeen male and female puppies considered having healthy hear by X-ray and clinical examination are used feom April to July 1994. Scanning point selection of probe head and the distinction of imaged cardiac structures were accomplished by necropsy and cardiac scanning performed through thoracotomy under general anesthesia. At 10 o'clock position of transducer(at an angle of 30$^{\circ}$ between imaginary line from elbow joint to 3rd sternum and probe head, 60$^{\circ}$ from body surface, 4th intercostal space of right thorax) with the marker of scanner toward the head of dogs right atrium, left atrium and left ventricle were observed in 2, 3, 4, 5 intercostal space(2cm from the sternum) of experimental dog positioned ventrodorsally under general anesthesia. Under these conditions, the numerical values of imaged diastolic hear are as follows : the distance from skin to apex(mean$\pm$S.D) 47.53$\pm$6.94mm, thickness of left ventricular wall 6.00$\pm$1.60mm, length of left ventricle 16.27$\pm$5.31mm, width of left ventricle 15,33$\pm$4.25mm, length of left atrium 12.33$\pm$3.82mm, width of left atrium 11. 33$\pm$3.94mm, length of right atrium 1.00$\pm$2.41mm, width of right atrium 11.21$\pm$2.76mm and the area of left ventricle 270.92$\pm$109.81mm$^2$, area of left atrium 98.00$\pm$41.08mm$^2$, area of right atrium 62.75$\pm$21.04mm$^2$.

• Applied Microscopy
• /
• v.41 no.2
• /
• pp.99-107
• /
• 2011

Light microscope, and scanning and transmission electron microscopy were used to investigate the fine structure of sperm of the Korea squirrel, Tamias sibiricus. The sperm head of T. sibiricus was paddle in shape. The total length of T. sibiricus sperm was 67.8 ${\mu}m$. The length of sperm head was 7.8 ${\mu}m$, and the tail (60.0 ${\mu}m$) was consisted of four major segments: the neck (1.0 ${\mu}m$), middle (8.0 ${\mu}m$), principal (48.5 ${\mu}m$) and end piece (2.5 ${\mu}m$), respectively. Especially, the length of the middle piece is short, and end piece was very shorter than those of other rodents. The post-nuclear cap was occupied about a fifth of nucleus. The equatorial segment is located between the post-nuclear cap segment and acrosomal cap on the nuclear surface. Nine segmented columns were surrounded by the mitochondria, and numbers of gyres of mitochondria were 26. One segmented column was consisted ten to twelve knobs, and each of segmented column in the neck region connected with the nine outer dense fiber in the middle piece. Numerous satellite-like fibers were scattered around the segmented columns. Nos. 1, 5 and 6 of the outer dense fibers in the middle piece were larger than the others. A fibrous sheath and longitudinal column of the principal piece were in evidence, but the fibrous sheath and longitudinal column was not seen at the end piece. In conclusion, the structural features of sperm head and tail may be useful information to patterns of sperm evolution and classification of species.

• Journal of Navigation and Port Research
• /
• v.30 no.8 s.114
• /
• pp.649-655
• /
• 2006

Waves progressing into the coastal area can be amplified, swashed and overtopped by a wave overtopping control structure, and it converts the kinetic energy of the waves to the potential energy with a hydraulic head above the mean sea level by conserving the overflow in a reservoir. Then the potential energy in the form of hydraulic head can be converted to electric power utilizing extremely low-head hydraulic turbine. This study aims to find the most optimal shape of wave overtopping structure which maximizes overtopping volume rate of sea water. Laboratory experiments for the performance evaluation of wave overtopping control structures were carried out in three dimensional wave tank, and the three dimensional structure models with planar wave concentration shapes(B/b) were manufactured into five classes, which were optimized by cross sectional parameters of the structure, ie, length of ramp(l), gradient of inclined ramp($cot{\phi}$) and freeboard height of the wave overtopping structure($h_e$) proposed by Shin and Hong(2005). The wave overtopping discharges were investigated with 20 incident wave conditions and wave directions of $0^{\circ},\;15^{\circ},\;30^{\circ}$.

• Journal of Korean Society of Forest Science
• /
• v.102 no.2
• /
• pp.305-308
• /
• 2013

This study was conducted to describe the external morphology of Platypus-koryoensis Murayama in immature stage, to determine each instar based on larvae head-capsule, and to measure individual and local variations in the number of mycangia of adult. Egg of P. koryoensis, had oval shape and lengths of the major and minor axis were $0.67{\pm}0.051$ mm and $0.41{\pm}0.053$ mm, respectively. Body colour of $5^{th}$ instar was gloss white with well-developed mandible. Larvae of P. koryoensis grew up to $5^{th}$ instar and each instar was clearly classified by head capsule width. Head capsule width for $1^{st}$, $2^{nd}$, $3^{rd}$, $4^{th}$, and $5^{th}$ instar larvae were $0.35{\pm}0.004$ mm, $0.45{\pm}0.010$ mm, $0.67{\pm}0.039$ mm, $0.94{\pm}0.069$ mm and, $1.12{\pm}0.007$ mm, respectively. The colour of pupa was pale yellow and its length was $4.64{\pm}0.044$ mm. The number of mycangia per female had individual variations from 5 to 12 and 83% of the adults had from 6 to 8 mycangia. There was no significant difference in number of mycangia collected from between Namyangju region and Honchen region.

• Progress in Medical Physics
• /
• v.13 no.1
• /
• pp.1-8
• /
• 2002

Accurate knowledge of the distribution of contamination electrons ( which comes from mainly gantry head by Compton scattering, pair production, and tray: henceforth called leptons ) at the surface and in the first centimeters of tissue is essential for the clinical practice of radiation oncology. Such lepton tends to reduce or eliminate the ‘skin-sparing’ advantage of megavoltage photon beam radiotherapy, This information is needed to prescribe a absorbed dose to a skin volume at a few millimeter depth in high energy therapeutic radiation photon beam All experiments were done with 15 MV photon beam from a dual energy linear accelerator (Clinac 1800, Varian). Field size is defined by ranged from 10.0$\times$10.0 to 30.0$\times$30.0 $\textrm{cm}^2$. The absorbed dose and distribution of leptons in therapeutic radiation beam (15 MV) are investigated by means of variable blocked beams of 30.0$\times$30.0 $\textrm{cm}^2$ and dose beam profiles partly removed leptons with a copper plate. A numerous leptons mainly are distributed as shape of broad cone in the central photon beam and leptons path length in the water are shorter than 2.5 cm because of the leptons energy having around 3.0 MeV. These results clearly appears that the subtraction of leptons from the total depth dose curve not only lower the absolute dose in the buildup region and surface dose, it also causes a shift of d$_{max}$ to a deeper depth.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.576-579
• /
• 2011

Wireless sensor network are widely all over different fields. Because of its distinguished characteristics, we must take account of the factor of energy consumed when designing routing protocol. Wireless sensor networks consist of small battery powered devices with limited energy resources. Once deployed, the small sensor nodes are usually inaccessible to the user, and thus replacement of the energy source is not feasible. Hence, energy efficiency is a key design issue that needs to be enhanced in order to improve the life span of the network. In BCDCP, all sensors sends data from the CH (Cluster Head) and then to the BS (Base Station). BCDCP works well in a smallscale network however is not preferred in a large scale network since it uses much energy for long distance wireless communication. TBRP can be used for large scale network, but it weakness lies on the fact that the nodedry out of energy easily since it uses multi-hops transmission data to the Base Station. Here, we proposed a routing protocol. A Cluster Based Energy Efficient Tree Routing Protocol (CETRP) in Wireless Sensor Networks (WSNs) to prolong network life time through the balanced energy consumption. CETRP selects Cluster Head of cluster tree shape and uses maximum two hops data transmission to the Cluster Head in every level. We show CETRP outperforms BCDCP and TBRP with several experiments.

• The Journal of Korean Society for Radiation Therapy
• /
• v.31 no.1
• /
• pp.25-32
• /
• 2019

Purpose: The size, shape, and volume of prosthetic appliance depend on the metal artifacts resulting from dental implant during head and neck treatment with radiation. This reduced the accuracy of contouring targets and surrounding normal tissues in radiation treatment plan. Therefore, the purpose of this study is to obtain the images of metal representing the size of tooth through MVCT, SMART-MAR CT and KVCT, evaluate the volumes, apply them into the proton therapy plan, and analyze the difference of dose distribution. Materials and Methods : Metal A ($0.5{\times}0.5{\times}0.5cm$), Metal B ($1{\times}1{\times}1cm$), and Metal C ($1{\times}2{\times}1cm$) similar in size to inlay, crown, and bridge taking the treatments used at the dentist's into account were made with Cerrobend ($9.64g/cm^3$). Metal was placed into the In House Head & Neck Phantom and by using CT Simulator (Discovery CT 590RT, GE, USA) the images of KVCT and SMART-MAR were obtained with slice thickness 1.25 mm. The images of MVCT were obtained in the same way with $RADIXACT^{(R)}$ Series (Accuracy $Precision^{(R)}$, USA). The images of metal obtained through MVCT, SMART-MAR CT, and KVCT were compared in both size of axis X, Y, and Z and volume based on the Autocontour Thresholds Raw Values from the computerized treatment planning equipment Pinnacle (Ver 9.10, Philips, Palo Alto, USA). The proton treatment plan (Ray station 5.1, RaySearch, USA) was set by fusing the contour of metal B ($1{\times}1{\times}1cm$) obtained from the above experiment by each CT into KVCT in order to compare the difference of dose distribution. Result: Referencing the actual sizes, it was appeared: Metal A (MVCT: 1.0 times, SMART-MAR CT: 1.84 times, and KVCT: 1.92 times), Metal B (MVCT: 1.02 times, SMART-MAR CT: 1.47 times, and KVCT: 1.82 times), and Metal C (MVCT: 1.0 times, SMART-MAR CT: 1.46 times, and KVCT: 1.66 times). MVCT was measured most similarly to the actual metal volume. As a result of measurement by applying the volume of metal B into proton treatment plan, the dose of $D_{99%}$ volume was measured as: MVCT: 3094 CcGE, SMART-MAR CT: 2902 CcGE, and KVCT: 2880 CcGE, against the reference 3082 CcGE Conclusion: Overall volume and axes X and Z were most identical to the actual sizes in MVCT and axis Y, which is in the superior-Inferior direction, was regular in length without differences in CT. The best dose distribution was shown in MVCT having similar size, shape, and volume of metal when treating head and neck protons. Thus it is thought that it would be very useful if the contour of prosthetic appliance using MVCT is applied into KVCT for proton treatment plan.