• The Journal of the Korea Contents Association
• /
• v.17 no.4
• /
• pp.200-208
• /
• 2017

Despite a rapid market growth in VR, cyber sickness has become the most serious problem in terms of user experience. The aim of this study is to verify whether there are differences in user's perception of cyber sickness by the point-of-view and the movement in VR contents. An experimental testing of game playing with VR headset was conducted on the effects of two conditions: first-person and third-person views in the point-of-view condition, and yaw - pitch rotations in the head movement condition. The results showed that cyber sickness worsened in the first-person point-of-view and in the yaw rotation movement. Point-of-view and movement had main effects on the cyber sickness, but an interaction effect between point-of-view and movement was not found. Based on the findings, along with reducing VR sickness, we proposed practical implications for VR contents planning for building balanced VR user experience. Positive VR experience can be reinforced through visual design, multi-modal interface design, and experience marketing for the optimal level of contents immersion. A future research was suggested on the roll rotation for diverse content genre development.

• The korean journal of orthodontics
• /
• v.23 no.4 s.43
• /
• pp.455-474
• /
• 1993

Degenerative joint disease(DJD) has hun known as one of the diseases which affect the middleor old-aged people. But as orthodontists are getting interested in the adult orthodontics, it is not rare for them to meet the open-bite patients with the TMJ DJD in their clinics. The purpose of this article is to investigate the cephalometric characteristics of the open-bite cases with TMJ DJD. Twelve TMJ DJD patients($15.1\~39.5$ years old) were selected from the patients who visited Department of Orthodontics, Seoul National University Hospital. Cephalograms were taken and means from 60 measurements were compared by t-test with those of the fifty four healthy adults($20.0\~26.7$ years old) who have normal occlusion and TMJ. In this study male and female are compared respectively, for in the normal samples 26 measurements showed significant differences between the male and the female. The results and conclusions axe as follows: 1 In DJD group, ANB and Angle of convexity decreased, which means the retruding of the mandible. The interincisal angle was smaller than that of the normal group. The means of the overbite were -2.1mm in male and -3.0mm in female, and the means of the overjet were 5.6mm in male and 6.7mm in female. The profile was similar to that of Angle's Class II div.1 open-bite. 2. SN-GoMe and FMA increased in DJD but SN-PP and FH-PP did not show any significant difference. In TMJ DJD open-bite cases, the bony structure lower than the palatal plane seemed to play an important role in developing open-bite. 3. In DJD group, PH-ArGo, SArGo and Y-sxis angle increased significantly, but genial angle showed no significant difference. The means of hか were 50.1mm in male and 40.2mm in female, which were significantly smaller than those of the normal(56.5mm in male, 50.9mm in female). These findings seemed to indicate the posterior rotation of mandible resulted from the shortening of the ramus height. 4. Anterior faical height(AFH), upper anterior facial height(UAFH) and lower anterior facial height (LAEH) of DJD showed no significant increase as compared with those of the noraml group. There was no significant difference in the ratio of upper anterior facial height to lower anterior facial height(UAFH/LAFH). But, lower posterior facial height(LPFH) was significantly smaller than that of the normal group. 5. It was thought that the peculiar profile of the TMJ DJD open-bite was resulted from the posterior rotation of mandible as the ramus became short following the degerative destruction of of the condylar head and neck.

• The Korean Journal of Physiology and Pharmacology
• /
• v.3 no.5
• /
• pp.481-490
• /
• 1999

To investigate the changes in the responses of vestibular neurons with time during vestibular compensation, the resting activity and dynamic responses of type I and II neurons in the medial vestibular nuclei to sinusoidal angular acceleration were recorded following unilateral labyrinthectomy (ULX) in Sprague-Dawley rats. The unitary extracellular neuronal activity was recorded from the bilateral medial vestibular nuclei with stainless steel microelectrodes of $3{\sim}5\;M{\Omega}$ before ULX, and 6, 24, 48, 72 hours, and 1 week after ULX under pentobarbital sodium anesthesia (30 mg/kg, i.p.). Gain (spikes/s/deg/s) and phase (in degrees) were determined from the neuronal activity induced by sinusoidal head rotation with 0.05, 0.1, 0.2, and 0.4 Hz. The mean resting activity before ULX was $16.7{\pm}8.6$ spikes/s in type I neurons $(n=67,\;M{\pm}SD)$ and $14.5{\pm}8.4$ spikes/s in type II neurons (n=43). The activities of ipsilateral type I and contralateral type II neurons to the lesion side decreased markedly till 24 hr post-op, and a significant difference between ipsilateral and contralateral type I neurons sustained till 24 hr post-op. The gain at 4 different frequencies of sinusoidal rotation was depressed in all neurons till 6 or 24 hr post-op and then increased with time. The rate of decrease in gain was more prominent in ipsilateral type I and contralateral type II neurons immediately after ULX. Although the gain of those neurons increased gradually after 24 hours, it remained below normal levels. The phase was significantly advanced in all neurons following ULX. These results suggest that a depression of activities in ipsilateral type I and contralateral type II neurons is closely related with the occurrence of vestibular symptoms and restoration of activities in those neurons ameliorates the vestibular symptoms.

• Journal of the Korean Geosynthetics Society
• /
• v.22 no.3
• /
• pp.97-103
• /
• 2023

Recently, research on the lateral resistance of pile foundations has been actively conducted. In experimental studies on the lateral resistance of pile foundations, displacement control or load control methods are used. However, in the case of the displacement control method, the lateral resistance of the pile varies depending on the rate of the load applied to the pile. Therefore, this study seeks to determine the change in lateral resistance of pile foundations according to lateral loading rate through model experiments. The experimental results showed that the lateral resistance of the pile tended to decrease as the lateral loading rate applied to the pile head increased. In order to confirm this, a model experiment of the side change of the ground and pile according to the loading rate was additionally conducted. Through inverse analysis, the change in the depth of the rotation point according to the lateral loading rate was identified. Through the change in the lateral resistance of the pile foundation and the depth of the rotating point according to the lateral loading rate, it was proposed to test the loading rate within 1.5 mm/min during the lateral loading test of the pile.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.2
• /
• pp.177-185
• /
• 2007

Even though there were no clear definitions of the short game and short game distance, short game capability is crucial for a good golf score. Generally, chip shot and pitch shot are regarded as two principal components of the short game. Chip shot is a short, low trajectory shot played to the green or from trouble back into play. Pitch shot is a high trajectory shot of short length. Biomechanical studies were conducted usually to analyze full swing and putting motions. The purpose of the study was to reveal the kinematical differences between professional golfers' 30 yard $53^{\circ}wedge$ chip shot and $56^{\circ}wedge$ pitch shot motions. Fifteen male professional golfers were recruited for the study. Kinematical data were collected by the 60 Hz three-dimensional motion analysis system. Statistical comparisons were made by paired t-test, ANOVA, and Duncan of the SPSS 12.0K with the $\alpha$ value of .05. Results show that both the left hand and the ball were placed left of the center of the left and right foot at address. The left hand position of the chip shot was significantly left side of that of the pitch shot. But the ball position of the pitch shot was significantly right side of that of the chip shot. All body segments aligned to the left of the target line, open, at address. Except shoulder, there were no significant pelvis, knee, and feet alignment differences between chip shot and pitch shot. These differences at address seem for the ball height control. Pitch shot swing motions(the shoulder and pelvis rotation and the club head travel distance) were significantly bigger than those of the chip shot. Club head velocity of the pitch shot was significantly faster than that of the chip shot at the moment of impact. This was for the same shot length control with different lofted clubs. Swing motion differences seem mainly caused by the same shot length control with different ball height control.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.2 no.1
• /
• pp.10-19
• /
• 1992

Mn - Zn Ferrite has physical properties of the high initial permeability, saturation magnetic flux density, and low loss factor as a representative magnetic material of soft ferrites, in addition the mechanical property is excellent as a single crystal. Therefore it is important electronic components and used for VTR Head. Mn - Zn Ferrite single crystals with the diameter 8mm were grown in atmosphere mixed with $O_2$ and Ar gas by the Floating Zone(FZ) method that impurities can not be incorporated to the crystals because of not-using the crucible to put in the melt, and the sharp temperature gradient results from making a focus at one point utilizing the infrared ray emitted from the halogen lamp as a heat source. During the crystal growing, the highest temperature of melting area was maintained to be $1650^{\circ}C$, growth rate and rotation rate were 10 mm/hr, 20 rpm respectively. The phases and the growth directions of crystals were determined from the analysis of X RD patterns, Laue, TEM diffraction patterns and etch pit shapes were observed by the optical microscope through the chemical etching. The corelation of optimum conditions for acquiring the better crystals was found out with the growth rate, the length and diameter of melt at the interface according to the diameter of feed rod, and the patterns of growing interface also studied.

• Korean Journal of Applied Biomechanics
• /
• v.20 no.2
• /
• pp.155-165
• /
• 2010

The purpose of this study was to analyze kinematic quantitative factors required of a forehand counter drive in table tennis through 3-D analysis. Four national table tennis players participated in this study. The mean of elapsed time for total drive motion was $1.009{\pm}0.23\;s$. At the phase of impact B1 was the fastest as 0.075 s. This may affect efficiency in the initial velocity and spin of the ball by making a powerful counter drive. The pattern of center of mass showed that it moved back and returned to where it was then moved forward. At the back swing, lower stance made wide base of support and a stronger and safer stance. It may help increasing the ball spin. Angle of the elbow was extended up to $110.75{\pm}1.25^{\circ}$ at the back swing and the angle decreased by $93.75{\pm}3.51^{\circ}$ at impact. Decreased rotation range of swinging arm increased linear velocity of racket-head and impulse on the ball. Eventually it led more spin to the ball and maximized the ball speed. Angle of knee joint decreased from ready position to back swing, then increased from the moment of the impact and decreased at the follow thorough. The velocity of racket-head was the fastest at impact of phase 2. Horizontal velocity was $7796.5{\pm}362\;mm/s$ and vertical velocity was $4589.4{\pm}298.4\;mm/s$ at the moment. It may help increase the speed and spin of the ball in a moment. The means of each ground reaction force result showed maximum at the back swing(E2) except A2. Vertical ground reaction force means suggest that all males and females showed maximum vertical power(E2), The maximum power of means was $499.7{\pm}38.8\;N$ for male players and $519.5{\pm}136.7\;N$ for female players.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.1
• /
• pp.141-148
• /
• 2020

Unilateral neglect is associated with stroke, a neurological disorder caused by cerebrovascular injury, and is a symptom of not recognizing or responding to the opposite stimulus of the cerebral hemisphere, mainly in the right cerebral hemisphere injury. In this paper, we implemented contents using Virtual Reality based on 10 items and contents of Korean Catherine Bergego Scale(K-CBS), which is used as a behavioral evaluation scale for unilateral neglect. Implemented contents can evaluate body disregard, motility disregard, visual and spatial disregard, auditory attention, etc., which are symptoms of unilateral neglected patients, and can confirmed progression of disease quantitatively by measuring time and rotation angle of head during visual recognition. This method is expected to be useful for rehabilitation training using convenient unilateral neglect diagnosis and its applied contents.

• Journal of Korean Neurosurgical Society
• /
• v.61 no.2
• /
• pp.277-281
• /
• 2018

Objective : Craniovertebral junctional anomalies constitute a technical challenge. Surgical opening of atlantoaxial joint region is a complex procedure especially in patients with nuchal deformity like basilar invagination. This region has actually very complicated anatomical and functional characteristics, including multiple joints providing extension, flexion, and wide rotation. In fact, it is also a bottleneck region where bones, neural structures, and blood vessels are located. Stabilization surgery regarding this region should consider the fact that the area exposes excessive and life-long stress due to complex movements and human posture. Therefore, all options should be considered for surgical stabilization, and they could be interchanged during the surgery, if required. Methods : A 53-year-old male patient applied to outpatients' clinic with complaints of head and neck pain persisting for a long time. Physical examination was normal except increased deep tendon reflexes. The patient was on long-term corticosteroid due to an allergic disease. Magnetic resonance imaging and computed tomography findings indicated basilar invagination and atlantoaxial dislocation.The patient underwent C0-C3-C4 (lateral mass) and additional C0-C2 (translaminar) stabilization surgery. Results : In routine practice, the sites where rods are bound to occipital plates were placed as paramedian. Instead, we inserted lateral mass screw to the sites where occipital screws were inserted on the occipital plate, thereby creating a site where extra rod could be bound.When C2 translaminar screw is inserted, screw caps remain on the median plane, which makes them difficult to bind to contralateral system. These bind directly to occipital plate without any connection from this region to the contralateral system.Advantages of this technique include easy insertion of C2 translaminar screws, presence of increased screw sizes, and exclusion of pullout forces onto the screw from neck movements. Another advantage of the technique is the median placement of the rod; i.e., thick part of the occipital bone is in alignment with axial loading. Conclusion : We believe that this technique, which could be easily performed as adjuvant to classical stabilization surgery with no need for special screw and rod, may improve distraction force in patients with low bone density.

• Archives of Craniofacial Surgery
• /
• v.14 no.2
• /
• pp.107-110
• /
• 2013

Background: Basal cell carcinoma (BCC) is the most common skin cancer. About 74% cases of basal cell cancer occur on the head and neck. Basal cell carcinoma on the face may have a higher degree of subclinical spread than tumors arising elsewhere. And incompletely excised BCCs become more aggressive when they recur. So the surgical removal and reconstruction of BCC located on the face are important to make perfect curing and cosmetic results. Methods: A retrospective study was done with 128 patients (137 cancers) who were treated with BCC on the face since 1987 to 2011. General data of these cases such as the primary site of cancer, age and sex of the patients, operative methods, and recurrence rate were reviewed. Results: The ratio of men to women was 1:1.4. And 86.9% of the patients with BCC were older than the age of 50 years with the mean age of 65.8 years. The distribution of facial basal cell carcinoma was on the nose, eyelids, cheek, and nasolabial fold. Surgical methods for treatment were local flap, full thickness skin graft, primary closure, and split thickness skin graft. Specifically, local flap consists of V-Y advancement flap, cheek advancement flap, limberg flap, forehead flap, nasolabial flap, rotation flap, transposition flap, bilobed flap, and island flap. Six cases recurred and all of them were treated with reoperation. Conclusion: The authors reviewed facial basal cell carcinoma cases in our hospital. This study might be helpful to choose appropriate operation method to manage BCC on face in Korea.