This document was prepared to review and summarize the analytical methods for airborne and bulk asbestos. Basic principles, shortcomings and advantages for asbestos analytical instruments using phase contrast microscopy(PCM), polarized light microscopy(PLM), X-ray diffractometer (XRD), transmission electron microscopy(TEM), scanning electron microscopy(SEM) were reviewed. Both PCM and PLM are principal instrument for airborne and bulk asbestos analysis, respectively. If needed, analytical electron microscopy is employed to confirm asbestos identification. PCM is used originally for workplace airborne asbestos fiber and its application has been expanded to measure airborne fiber. Shortcoming of PCM is that it cannot differentiate true asbestos from non asbestos fiber form and its low resolution limit ($0.2{\sim}0.25{\mu}m$). The measurement of airborne asbestos fiber can be performed by EPA's Asbestos Hazard Emergency Response Act (AHERA) method, World Health Organization (WHO) method, International Standard Organization (ISO) 10312 method, Japan's Environmental Asbestos Monitoring method, and Standard method of Indoor Air Quality of Korea. The measurement of airborne asbestos fiber in workplace can be performed by National Institute for Occupational Safety and Health (NIOSH) 7400 method, NIOSH 7402 method, Occupational Safety and Health Administration (OSHA) ID-160 method, UK's Health and Safety Executive(HSE) Methods for the determination of hazardous substances (MDHS) 39/4 method and Korea Occupational Safety and Health Agency (KOSHA) CODE-A-1-2004 method of Korea. To analyze the bulk asbestos, stereo microscope (SM) and PLM is required by EPA -600/R-93/116 method. Most bulk asbestos can be identified by SM and PLM but one limitation of PLM is that it can not see very thin fiber (i.e., < $0.25{\mu}m$). Bulk asbestos analytical methods, including EPA-600/M4-82-020, EPA-600/R-93/116, OSHA ID-191, Laboratory approval program of New York were reviewed. Also, analytical methods for asbestos in soil, dust, water were briefly discussed. Analytical electron microscope, a transmission electron microscope equipped with selected area electron diffraction (SAED) and energy dispersive X-ray analyser(EDXA), has been known to be better to identify asbestiform than scanning electron microscope(SEM). Though there is no standard SEM procedures, SEM is known to be more suitable to analyze long, thin fiber and more cost-effective. Field emission scanning electron microscope (FE-SEM) imaging protocol was developed to identify asbestos fiber. Although many asbestos analytical methods are available, there is no method that can be applied to all type of samples. In order to detect asbestos with confidence, all advantages and disadvantages of each instrument and method for given sample should be considered.
본 연구에서는 연소재와 식품폐기물의 산업부산물을 이용하여 비점오염 수처리 여과재로 활용 가능한 여과재를 개발하였다. 첨가제 주입에 따른 공극 형성은 강도가 유지되는 전제하에 알루미늄 파우더 3%, $Ca(OH)_2$ 2%일 경우 기포형성이 가장 많이 발생하는 것으로 나타났다. 결합재의 적정 혼합비로서 (연소재+식품 폐기물+점토):(물유리+콜로이드성 실리카)는 7:3 이상에서 가장 효과적인 것으로 나타났으며, 온도에 따른 강도반응은 $1,000^{\circ}C$일 경우가 효과적이다. 최적의 혼합비율은 연소재 30%, 점토 30%, 식품 폐기물 10%에서 가장 높은 강도를 보여 비점오염 수처리로 활용도가 가장 높을 것이라 판단된다. 최적 배합조건에서 제조된 여과재는 $SiO_2$ 65.8%, 밀도 $1.4g/cm^3$, 공극률 25.6%, pH 9.8로 분석되었으며, 유해물질은 검출되지 않았다. 수처리에 대한 여과능을 알아본 결과 여과된 SS의 평균농도는 $14.06mg/{\ell}$로서 SS의 제거효율은 90.63%로 나타났으며, 역세척 회복률도 97.1%로 나타났다. 이는 폐자원의 활용뿐만 아니라 경제성 및 효율성을 고려한 수처리 여과재 제조가 가능함에 따라 폐자원의 높은 부가가치화가 가능하다.
본 연구에서는 암모니아 누출사고 발생 시 지방자치단체에서 신속하게 주민대피 및 알림을 결정할 수 있도록 화학물질사고대응정보시스템(CARIS)을 활용한 피해영향거리 산정식을 도출하고자 하였다. 암모니아는 화학물질관리법상 사고대비물질이자 화학물질안전원에서 정한 주민대피 대비물질 16종 중 하나이며, 2014년부터 2019년 기간 동안 화학사고가 58건으로 가장 빈번하게 발생한 화학물질이다. 연구에서는 미국환경보호국(EPA)에서 지정하고, 유아 및 어린이, 노인 등의 취약집단을 포함하며 일반 인구에 적용 가능한 급성노출기준인 AEGL을 기준으로 암모니아의 노출시간에 따른 피해영향거리 산정식을 도출하였다. AEGL-3 농도기준에 따른 위험지역 구분과 AEGL-2 농도기준에 따른 준위험지역을 구분을 할 수 있는 농도별, 노출시간별 산정식을 도출하였으며, 도출된 산정식으로 얻어진 피해영향거리 수치와 화학물질사고대응정보시스템의 피해영향거리 수치간의 상대표준편차를 비교한 결과 0~2 % 범위인 것으로 조사되었다. 따라서 지방자치단체에서는 실제 사고 현장 상황을 고려하고 연구에서 도출된 적합한 피해영향거리 산정식을 적용하여 사고 원점 인근의 주민을 소산하거나 실내대피 알림 등의 보호조치에 활용될 수 있도록 하여야 한다.
본 연구는 문헌검색을 통해 우리나라 상용 식품의 수은 함량 데이터베이스를 구축하기 위해 수행하였고, 식품 섭취량의 95%를 포함하는 완성도가 높은 데이터베이스를 구축하였다. 2007~2009년 국민건강영양조사 식품 섭취량 조사 결과를 기반으로 대상 식품을 선정하였고, 국내에서 식품 중 수은 함량을 분석한 문헌을 고찰하여 수은 함량값을 수집하였다. 미국 농무성의 데이터 질적 평가시스템을 적용하여 수집된 문헌의 함량자료를 선택했고, 함량값이 없는 식품은 식재료의 수분함량 차이를 고려하여 대체값을 적용하였다. 구축된 데이터베이스는 총 702개의 식품 중 356개의 식품에 대한 수은 함량값을 포함하였고 (50.7%), 대상자들이 섭취한 식품 섭취량으로는 95.1%에 달하는 식품을 포함하는 것으로, 질적으로 양적으로 완성도가 높은 것으로 평가되었다. 본 연구의 결과는 향후 식품을 통한 수은 노출량 추정 및 위해성 평가에 활용될 수 있으며, 본 연구의 데이터베이스 구축 방법론은 식품을 통해 노출되는 다른 유해물질의 함량데이터베이스를구축하는 데에 적용할 수 있을 것이다.
Objective : To compare the contents of heavy metals, residual pesticides and sulfur dioxide before/after a decoction. Methods : The heavy metal contents before/after a decoction were measured by Inductively Coupled Plasma Atomic Emission Spectrometer (ICP-AES) and mercury analyzer. In order to analyze pesticides in 4 samples we used simultaneous multi-residue analysis of pesticides by GC/ECD, which was followed by GC/MSD analysis to confirm the identity of the detected pesticide in each sample. In addition, the contents of sulfur dioxide ($SO_2$) were performed by Monier-Williams distillation method. Results: 1. The mean values of heavy metal contents (mg/kg) for the samples were as follows: Jaeumganghwa-tang (before decoction - Pb; 1.190, Cd; 0.184, As; 0.099 and Hg; 0.028, after decoction - Pb; .033, Cd; 0.003, As; 0.005 and Hg; 0.001), Yukmijiwhang-tang (before decoction - Pb; 0.484, Cd; 0.133, As; 0.053 and Hg; 0.009, after decoction - Pb; 0.065, Cd; 0.008, As; 0.007 and Hg; not detected), Bojungikgi-tang (before decoction - Pb; 0.863, Cd; 0.197, As; below 0.016 and Hg; 0.011, after decoction - Pb; 0.071, Cd; 0.009, As; 0.004 and Hg; 0.001) and Ssangwha-tang (before decoction - Pb; 1.511, Cd; 0.212, As; 0.094 and Hg; 0.016, after decoction - Pb; 0.029, Cd; 0.006, As; 0.005 and Hg; 0.0004). 2. Contents (mg/kg) of sulfur dioxide ($SO_2$) before a decoction in Jaeumganghwa-tang, Yukmijiwhang-tang and Ssangwha-tang exhibited 22.7, 107.3 and 5.5, respectively. However, contents of sulfur dioxide after a decoction in all samples were not detected. 3. Contents (mg/kg) of residual pesticides before/after a decoction in all samples were not detected. Conclusion : These results will be used to establish a criterion of heavy metals, residual pesticides and sulfur dioxide.
Objectives: The purpose of this study is to examine the parental recognition and utilizing patterns of oriental medical care in children who live in Seong-Dong district. Methods 802 day-care center children's parents participated in the survey on recognition and utilizing patterns of oriental medical care, and 702 of the surveys were analyzed. Results: 1. 38.33% has received previous oriental medical treatments and most were received at the children's age under 12-24 months. Majority of the treatments took place in the clinical settings. By recommendation, some also received their treatment at the medical centers. One of the reasons why they receive oriental medical treatments was that they prefer to balance their treatment with the orental medical treatments along with the western's. 2. 53.85% of those who received oriental medical treatments were satisfied with their treatments. The effective treatment results were the major reason for the satisfaction. 3. 49.56% of those who had oriental medical treatments chose specific oriental medical facilities for the children's ailment. Most specific oriental medical facilities were local oriental medical clinics. Reputation fame were the main reason in choosing the clinics. 4. In 2009, 55.26% had received care in the specific oriental medical clinics for the diseases, such as respiratory symptoms, systemic symptoms, gastrointestinal symptoms, skin problems, neurological and psychiatric disease for infants, and respiratory symptoms, gastrointestinal symptoms, systemic symptoms, skin problems, neurological and psychiatric symptoms, urinary symptoms and musculoskeletal symptoms for toddlers. 5. The average duration of herbal treatment were 7-14 days, preferably 4-6 days, and preferred number of medical visits were once a week on Saturdays and preferred day for night cares were on Friday nights. Average treatment fee per treatment was less than 10,000 won which coincided with the preferred treatment fee per visit. 6. The very first medical institutions chosen by parents once their children are ill are the following; Western medical institutions, western medical clinics, pharmacies, oriental medical clinics, health centers, and lastly, oriental medical institutions. The major concerns in receiving oriental medical cares include pesticides in herbs and hazardous substances in heavy metals. Preferred form of oriental medicine was decoction, the negative feedback of oriental medicine was mostly due to the bitter taste of the oriental herbal decoctions. Preferred frequency of intake was twice a day with less than 10cc~20cc per single intake. Conclusions: Taken all together, we conclude that the growing recognition of Oriental Pediatric medicine is needed among parents.
농약 등록 후에 농업 생산 현장에서 사용되는 농약에 대한 사용실태 및 작물별 단위면적당 사용량을 조사하기 위하여 2003년부터 2004년까지 작물별 주산단지별, 재배면적을 감안하여 292명의 농가를 선정하여 조사하였다. 농약안전사용기준 준수사항은 벼, 엽채소류 재배농가 모두가 대체적으로 잘 지키고 있었다. 조사농민의 대부분은 농약의 선택정보와 구매결정은 시판상이나 농협판매담당자의 권고에 의하여 결정하고 있었다. 작물별 단위면적당 농약사용량은 벼 5.51 kg $ha^{-1}$, 노지배추 3.91 kg $ha^{-1}$, 시설배추 2.93 kg $ha^{-1}$, 상추 0.76 kg $ha^{-1}$, 시금치 0.55 kg $ha^{-1}$, 잎들깨 1.34 kg $ha^{-1}$, 부추 4.83 kg $ha^{-1}$, 열무 0.42 kg $ha^{-1}$로 조사되었다. 벼, 상추, 시금치, 잎들깨에서는 사용량이 4년 전에 비해 감소하였으나 배추는 농약사용량이 증가하였다.
국내서식 물벼룩종을 이용한 표준생태독성시험법 개발을 위한 기초연구로서 국내환경에서의 대표성, 실내사육가능성 및 독성시험에 적합한 크기 등을 고려하여 선발된 4종의 한국산 물벼룩 Daphnia sp., Daphnia obtusa, Moina macrocopa, S.imocephalus vetulus과 Daphnia magna에 대한 실내사육조건에서의 life cycle을 조사하였다. 국내산 물벼룩 4종과 D. magna에 대한 실내사육조건에서의 전 생애에 걸친 생육특성을 조사한 결과 D. magna가 어미 1마리당 평균 358마리의 새끼를 출산하였고 국내산 물벼룩 중에는 Daphnia sp.가 297마리의 새끼를 출산하여 가장 출산새끼수가 많았으며 그 다음으로는 M. macrocopa, S. vetulus, D. obtusa 순이었다. 평균수명은 D. magna가 50일로 가장 길었으며 국내산 물벼룩 중에는 Daphnia sp.가 39일로 조사되었으며 그 다음으로는 S. vetulus, D. obtusa M. macrocopa, 순이었다. 특히 M. macrocopa의 경우 번식력이 우수하면서도 세대기간이 짧아 기존의 번식독성시험법에서 제시하는 21일보다 짧은 10일 정도의 단기간에 번식영향을 평가할 수 있을 것으로 판단된다.
The risk assessment is the qualitative or quantitative evaluation of the risk posed to human health and the environment by the actual or potential presence or release of hazardous substances, pollutants or contaminants. The environmental impact assessment (EIA) is assessed by the environmental criteria, and risk assessment is assessed by the risk rate. Risk rate based on dose-response values may not be easy to apply on regulatory basis like EIA for uncertainty. Internationally there is an example of OECD program. Risk assessment of High Production Volume (HPV) Chemicals has started since the OECD Program with the 1990 Council Act on the Co-operative Investigation and Risk Reduction of Existing Chemicals. These HPV chemicals include all chemicals produced or imported at levels greater than 1,000 tonnes per year in at least one Member country or in the European Union region. The SIDS called the Screening Information Data Set is regarded as the minimum information needed to assess an HPV chemical to determine whether any further work should be carried out or not. All the data elements of SIDS including assessment for environment and health are prepared as three formats of the full SIDS Dossier, the SIDS Initial Assessment Report (SIAR), and the SIDS Initial Assessment Profile (SIAP) of an HPV chemical. In 1998 the global chemical industry through the International Council of Chemical Associations (ICCA) has joined to work with OECD. The OECD has assessed approximately 1,000 chemicals from 1991 through 2004 with ICCA. Till the February of 2005, 592 chemicals of those chemicals completed SIDS reports. Member countries have been targeted the goal of 1,000 new chemicals from 2005 to 2010 and Korea shared 36 chemicals from the 1,000 new chemicals. Currently Korea has completed SIDS reports of 7 chemicals among sponsored 24 chemicals. In conclusion SIDS project will be linked to national program for outputs application with more reliable production. Both the OECD and industry will carry out their commitment to complete assessments for more and the remaining chemicals assessment. The major outputs will contribute to cope with international chemical management.
Objectives: It is difficult to identify exposure factors in the semiconductor industry due to low exposure levels to hazardous substances and because various processes take place in fabrication (FAB). Furthermore, a single worker often experiences a variety of job histories, so it is difficult to classify similar exposure groups (SEG) in the semiconductor industry. Therefore, we intend to develop a new exposure index, the period of working in FAB, that is applicable to the semiconductor industry. Methods: First, in specifying the classification of jobs, we clearly distinguished whether they were FAB workers or non-FAB workers. We checked FAB working hours per week through questionnaires administered to FAB workers. We derived an exposure index called FAB-Year that can represent the period of working in FAB. FAB-Year is an index that can quantitatively indicate the period of working in FAB, and one FAB-Year is defined as working in FAB for 40 hours per week for one year. Results: A total of 8,453 persons were surveyed, and male engineers and female operators occupied 90% of the total. The average total years of service of the subjects was 9.7 years, and the average FAB-Year value was 6.8. This means that the FAB-working ratio occupies 70% of total years of service. The average FAB-Year value for female operators was 8.4, for male facility engineers it was 7.7, and for male process engineers it was 3.5. A FAB-Year standardization value according to personal information (gender, job group, entry year, retirement year) for the survey subjects can be calculated, and standardized estimation values can be applied to workers who are not participating in the survey, such as retirees and workers on a leave of absence (LOA). Conclusions: This study suggests an alternative method for overcoming the limitations on epidemiological study of the semiconductor industry where it is difficult to classify exposure groups by developing a new exposure index called FAB-Year. Since FAB-Year is a quantitative index, we expect that various approaches will be possible in future epidemiological studies.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.