• Journal of the Korean Society of Safety
• /
• v.26 no.3
• /
• pp.63-68
• /
• 2011

Access-control of hazard zone in a steel manufacturing industry is studied in terms of safety management. Based on the results of risk evaluation for hazard zone, three risk zones with low, middle and high level are categorized. These zones have different color door and locking shape depending on their risk levels. At the high level, red door and key-based locking system are employed to accessed-controled path. Furthermore, tagout, lockout, interlock system for emergency stop, warning and flashing are also introduced. New standardized procedure of access-control for various hazard zones, which could help to greatly contribute to the prevention of accidents in advance, is proposed considering the risk level and the condition of given hazard zones. The standardized procedure of access-management suggested in this study will take an effective role as one of safety guide lines for hazardous workshop of manufacturing industries.

• Journal of the Korea Safety Management & Science
• /
• v.26 no.2
• /
• pp.33-42
• /
• 2024

Executive safety leadership is essential to prevent accidents in the workplace. However, will safety be secured by emphasizing only executive safety leadership to workers? In this study, the impact of executive safety leadership on the workplace hazard level was analyzed by adding the supervisor's safety role as a mediating variable. This paper shows that executive safety leadership has no direct effect on workplace hazard levels. However, executive safety leadership was found to have a significant impact on the supervisor safety role, and the supervisor safety role was found to lower the hazard levels in the workplace. In summary, executive safety leadership was found to reduce the hazard levels in the workplace through the full mediating effect of the supervisor safety role. Based on these research results, this study seeks to present the following recommendations to the government and management: The government should ensure that a workplace safety and health system is established by strengthening the effects of other mediating factors, such as strengthening the role of supervisors who are actually responsible for workplace safety and health. Executives must grant supervisors actual authority and responsibility to properly perform their safety roles and establish personnel and performance evaluation systems.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.7 no.4
• /
• pp.7-14
• /
• 2011

Infinite failure NHPP models presented in the literature exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rate per fault (hazard function). This infinite non-homogeneous Poisson process is model which reflects the possibility of introducing new faults when correcting or modifying the software. In this paper, polynomial hazard function have been proposed, which can efficiency application for software reliability. Algorithm for estimating the parameters used to maximum likelihood estimator and bisection method. Model selection based on mean square error and the coefficient of determination for the sake of efficient model were employed. In numerical example, log power time model of the existing model in this area and the polynomial hazard function model were compared using failure interval time. Because polynomial hazard function model is more efficient in terms of reliability, polynomial hazard function model as an alternative to the existing model also were able to confirm that can use in this area.

• Korean Security Journal
• /
• no.40
• /
• pp.7-33
• /
• 2014

Korean Government decided to establish the Ministry of National Emergency Management and has reformed the emergency management system due to Sewol ferry disaster. These efforts has been focused on the hardware rather than the software. All-hazard approach has been employed as the one of main principles in the emergency management in the United States. All-hazards approach concerns arrangements for managing the large range of possible effects of risks and emergencies. Once the priority of risks and emergencies is decided, agencies prepare for them. In addition, interagency collaboration is critical for the preparation of risks and emergencies such as cooperation with local governments instead of FEMA alone. It is necessary to consider employing all-hazard approach for the Ministry of National Emergency Management. Moreover, 'Korean All-hazard approach' should be developed in order to manage upcoming emergencies.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.4
• /
• pp.47-53
• /
• 2011

As global warming and has caused the number of abnormal changes, much damage has occurred recently in Korean Peninsula from natural disaster. To prevent and cope with these annually repeated natural hazards, scientific analysis are needed in Disaster Management, including systematic management. In this study, As part of scientific disaster prevention measures, digital image based hazard map for solution to overcome the existing hazard map with schematic representation was constructed. which was combined digital image, digital map and hazard information, and than hazard information system was developed using the hazard map. The hazard information map and hazard information system are able to provide great service to the public and to support quick decision making for hazard management and analysis of natural hazard damage.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.4
• /
• pp.9-16
• /
• 2011

Modern systems become more complex and the demand for systems safety goes up sharply. Thus, the proper handling of the safety requirements in the systems design is getting greatly increased attention these days. Hazard analysis has been one of the active areas of research in connection with systems safety. In this paper, we study a subject on how the hazard analysis results can be incorporated in the systems design. To this end we set up a goal on how to systematically generate safety requirements that should reflect hazard analysis results and be implemented in the systems design and development. To do so, we first review the process for systems design and suggest the associated Model. Then the process and results of hazard analysis are analyzed and Modeled particularly with emphasis on the safety data. The resulting data Model incorporating both the hazard analysis and system life cycle is used in the generation of safety requirements. Based on the developed data Model, the generation of the requirements, the construction of requirements DB, and the change management later on is demonstrated through the use of a computer-aided software tool.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.581-586
• /
• 2005

In this study, a hazard list is developed for accidents/incidents of Korean railway through identification of the risk sources. The risk sources are classified by the progress of the accidents/incidents, which consists of cause, triggering event, and failure of the safety system. The hazard list of railway accidents/incidents of Korea is then developed through extensive review of both domestic and foreign data for railway accidents/incidents risk sources. The list is refined for each of six subsystems of the railway system, which includes safety management system, operation management, human error and qualification management, installations and equipments, external hazard, and railway level crossing.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.297-298
• /
• 2021

The construction industry is a representative high levels of hazardous work environment, and the number of disasters in the construction industry is the highest compared to other industries. Information & Communication Technology(ICT) convergence technologies are being introduced worldwide, and this study considers ICT-based safety management cases at domestic and foreign, resulting in a list of technologies to recognize and resolve to construction site hazards. Technologies such as 「Development of hazard map considering cause, age, proficiency, type and timing of accident in construction industry」, 「Development of hazard map-based accident prediction platform using AI」, 「Development of smart safety management plan for whole construction work cycle」, 「Development of intelligent safety devices and smart safety equipment for mitigating hazard factors」 were derived as smart construction technologies that could solve this problem.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.21 no.2
• /
• pp.103-109
• /
• 2011

Object: we investigated some factors which can affect workers' comprehension of chemical hazard information and their actions to protect themselves from the hazard. Method: Comprehension score of chemical hazard information and the rate of wearing personal protective equipment (PPE) was surveyed for the 109 workers from 15 factories who were exposed to N, N-dimethylformamide. Difference of the worker's comprehension score of hazard information was analyzed by education interval, work duration and the way of occupational safety and health management between self-managed or sub-contracted. Result: Mean comprehension score of N, N-dimethylformamide hazard, which was given as a short quiz composed of 10 "true" or "false" problems, was 65%. Mean percentage of wearing PPE was improved as the education program was done within a month but decreased after 6 months. Eighty seven % of workers got the chemical hazard information from the material safety data sheet placed at workplace. Conclusion: Education interval and comprehension score affected the rate of wearing PPE. The way of occupational safety and health management self-managed or sub-contracted did not affect the workers' comprehension score on hazard information nor the rate of wearing PPE.

• Geomechanics and Engineering
• /
• v.35 no.6
• /
• pp.581-591
• /
• 2023

North Anatolian Fault Zone is tectonically active with recent earthquakes (Mw7.6 1999-Kocaeli and Mw7.2 1999-Düzce earthquakes) and it passes through Marmara region, which is highly industrialized, densely populated and economically important part of Turkey. Many power plants, located in Marmara region, are exposed to high seismic hazard. In this study, open source OpenQuake software has been used for the probabilistic earthquake hazard analysis of Marmara region and risk assessment for the specified energy facility. The SHARE project seismic zonation model has been used in the analysis with the regional sources, NGA GMPEs and site model logic trees. The earthquake hazard results have been compared with the former and existing earthquake resistant design regulations in Turkey, TSC 2007 and TBSCD 2018. In the scope of the study, the seismic hazard assessment for a typical natural gas combined cycle power plant located in Marmara region has been achieved. The seismic risk assessment has been accomplished for a typical control building located in the power plant using obtained seismic hazard results. The structural and non-structural fragility functions and a consequence model have been used in the seismic risk assessment. Based on the seismic hazard level with a 2% probability of exceedance in 50 years, considered for especially these type of critical structures, the ratios of structural and non-structural loss to the total building cost were obtained as 8.8% and 45.7%, respectively. The results of the study enable the practical seismic risk assessment of the critical facility located on different regions.