• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.388-389
• /
• 2011

최근 보급이 확대되고 있는 HVDC는 설치 당시의 상황 등에 따라 제어기가 달라지게 되므로, HVDC 프로젝트마다 제어기가 달라지게 된다. 따라서 PSS/E 프로그램에는 HVDC 설비를 위한 전용의 HVDC 모델을 개발할 수 있는 Model Writing 기법을 제공하고 있다. 하지만 국내에서는 UDM 개발 기술이 널리 전파되지 않아 UDM 기술기반이 취약한 상태이다. 이에 본 논문에 CIGRE HVDC 벤치 마크 모델에 대한 UDM을 개발하여 전용의 HVDC 모델을 개발하기 위한 기반기술을 확보하였다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.12
• /
• pp.2183-2189
• /
• 2011

Since main portion of the required electric power in Jeju Island is provided from the mainland through two HVDC lines, Jeju HVDC has a most significant impact on Jeju power system. Average wind speed of Jeju Island is the highest among several candidates in South Korea. So, Jeju Island has been a suitable site for the construction of wind farms where several wind farms are now operating and several others to be sited. Since the large-scale wind generation could have adverse impacts on the stable operation of Jeju power system, wind power is also important for the stability of Jeju power system. Therefore, accurate modeling of Jeju HVDC and wind farms is required for stability analysis of Jeju power system. In this paper, PSS/E-based dynamic modeling of Jeju HVDC and DFIG wind farms is proposed. Model-writing technique of PSS/E is used to develop USRAUX model and USRMDL model for controlling the frequency of HVDC and imposing an operation limit of wind power, respectively. Dynamic characteristics of Jeju HVDC and DFIG wind farms are analyzed through the dynamic simulations. The simulation results show the effectiveness of the developed models for Jeju power system.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.2
• /
• pp.184-191
• /
• 2006

This paper deals with the HVDC system fault analysis and the tuning of the control parameter. This paper is based on the actual cable fault which was caused by the overvoltage due to commutation failure. In order to analyze the fault, the detailed PSCAD/EMTDC model which the sampling time is $50{\mu}s$, was made. Finally, the control parameter of HVDC system was tuned.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.1
• /
• pp.1-12
• /
• 2005

This paper deals with the HVDC stability according to controller types and control modes. From the viewpoint of controllers, the HVDC system which has PI, PD and PID, is designed considering the system response and stability. Also the HVDC system consists of multi-control modes like voltage control, current control and alpha control. Therefore, the HVDC stability analysis have to consider the above control modes and controller types. In this paper, the reduced model of HVDC control is analyzed in PSS/E(Power System Simulation/Engineering) and PSCAD/EMTDC.

• Journal of Korea Society of Industrial Information Systems
• /
• v.29 no.4
• /
• pp.55-66
• /
• 2024

In order to safely use thermoplastic (TP) cables in high-voltage direct current (HVDC) systems, it is necessary to analyze the life loss rate of the cable due to system fault that may occur during operation through various research and tests. In this paper, we analyzed the insulation life loss rate of TP cable according to the type of faults that may occur during HVDC system operation. Electric power due to fault was applied to the TP cable model, and the life loss rate of the insulator was analyzed by applying the Arrhenius-Inverse Power Model (IPM) based on the analysis results through the 2D finite element method. As a result of the analysis, the life loss rate of the insulator was highly influenced by the electric field strength, and the loss rate was highest inside the insulator when a fault occurred. These results can be used as important characteristics in the early design stage for commercialization of TP cables.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.600-605
• /
• 2001

This paper deals with dynamic performance of the Cheju - Haenam HVDC system. The purpose of the study is to verify the control characteristics of the HVDC system and to analyze the dynamic performances by simulation study. Because the HVDC system consists of analogue and digital controller, the simulation is achieved with specification model incorporating nonlinear function. The dynamic performance simulations are performed by PSCAD/EMTDC

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.54 no.8
• /
• pp.401-409
• /
• 2005

This paper describes a feasibility analysis result of STATCOM application for the Jeju-Haenam HVDC system. The Jeju-Haenam HVDC system is one of the typical HVDC system interconnected with the low short-circuit-ratio AC system, which is vulnerable to the commutation failure due to the AC voltage variation. STATCOM has been considered as an effective reactive-power compensator to increase short-circuit-ratio of the interconnected AC system. In this study, a simulation model of Jeju-Hacnam HVDC system with STATCOM was developed using PSCAD/EMTDC. The developed simulation model was utilized to analyze the dynamic performance analysis of Jeju-Haenam HVDC system with STATCOM. The analysis results show that STATCOM can improve the dynamic performance of Jeju-Haenam HVDC system, such as load-change recovery performance and fault recovery performance.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.60-62
• /
• 2005

This paper describes a feasibility analysis result of STATCOM application for the Jeiu-Haenam HVDC system. The Jeju-Haenam HVDC system is one of the typical HVDC system interconnected with the low short-circuit-ratio AC system, which is vulnerable to the commutation failure due to the AC voltage variation. STATCOM has been considered as an effective reactive-power compensator to increase short-circuit-ratio of the interconnected AC system. In this study, a simulation model of Jeju-Haenam HVDC system with STATCOM was developed using PSCAD/EMTDC. The developed simulation model was utilized to analyze the dynamic performance analysis of Jeju-Haenam HVDC system with STATCOM. The analysis results show that STATCOM can improve the dynamic performance of Jeju-Haenam HVDC system, such as load-change recovery performance and fault recovery performance.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.153-154
• /
• 2015

Voltage Source Converter HVDC (VSC-HVDC) are a better alternative than conventional thyristor based HVDC systems. Unfortunately, VSC-HVDC's full potential cannot be utilized up till now due to absence of suitable HVDC protection. Recently, hybrid HVDC circuit breakers (HDCCB) have been developed and successfully lab tested. However, their application and feasibility in VSC-HVDC needs to be investigated. In this research paper we have modelled an existing HDCCB and evaluated its impact on fault reduction and interruption in VSC-HVDC systems. The HDCCB was applied in Korean Jeju-Haenam VSC-HVDC system model and its impact was analyzed for HVDC line-to-ground and line-to-line faults. HDCCB successfully interrupted the fault current and prevented the damages to costly IGBTs and converter transformers.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.1
• /
• pp.1-12
• /
• 2001

This paper deals with HVDC simulation. And the purpose of this paper is to reproduce measurements recorded at HVDC site and to verify the control gains and control actions. In this paper, the target of simulation study is Cheju-Haenam HVDC system. Because Cheju-Haenam HVDC system include analogue controller and digital controller, the detailed digital model considered nonlinear characteristics of analogue controllers is development for high accurate firing and control action. Finally the simulation results which is simulated by PSCAD/EMTDC is compared with measurement signals.