• Korean Journal of Microbiology
• /
• v.43 no.1
• /
• pp.59-65
• /
• 2007

The optimal conditions for Monascus pigments production of Monascus sp. KM 1001, pigment overproducing mutant, in submerged culture was investigated. The optimal medium for the production of pigment from KM 1001 mutant is determined to be composed of 4% rice powder, 0.15% Bacto-peptone, 0.1% glycine, 0.01% $FeSO_{4}{\cdot}7H_{2}O,\;0.1%\;MgSO_{4}{\cdot}7H_{2}O,\;0.25%\;KH_{2}PO_{4},\;pH4.5$. On optimal conditions,10.0 g/L of the cell mass was obtained at $30^{\circ}C$ for 5 days. Yellow, orange and red pigment of Monascus sp. KM 1001 were produced 3.25 units, 1.59 units and 0.88 units in extracellular part, and 84.96 units, 78.84 units and 91.80 units in intracellular part, respectively.

• Journal of Korean Society for Atmospheric Environment
• /
• v.5 no.2
• /
• pp.1-11
• /
• 1989

Sandy dust phenomena was observed from April 19 to 23, 1988 in Seoul. During this period it rained and the precipitation was collected to investigate the rain chemistry. This study was carried out to analyzed the chemical composition of precipitation by the measurements of conditivity, cations $(H^+, NH_4^+, K^+, Na^+, Ca^{2+}, MG^{2+})$, and anions $(SO_4^{2-}, NO_3^-, Cl^-, F^-, Br^-)$ which are believed to be the major ions playing an important role in the acidity of rain water. During the period of sandy dust phenomena the range of pH value and conductivity concentration of rainwater were 6.0-6.7, 172-254 $\mu \mho/cm$. The anions and cations concentrations increased and the orders of these concentrations were $SO_4^{2-} > Cl^- > NO_3^- > Na^+ > Ca^{2+} > NH_4^+ > Mg^{2+}$. THe principal chemical compounds of rainwater were estimated at $(NH_4)_2 SO_4, CaSO_4, NaCl, and MgCl_2$.

• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.1
• /
• pp.13-21
• /
• 2016

The Sulfur-Iodine thermochemical hydrogen production process (SI process) consists of the Bunsen reaction section, the $H_2SO_4$ decomposition section, and the HI decomposition section. The $HI_x$ solution ($I_2-HI-H_2O$) could be recycled to Bunsen reaction section from the HI decomposition section in the operation of the integrated SI process. The phase separation characteristic of the Bunsen reaction using the $HI_x$ solution was similar to that of $I_2-H_2O-SO_2$ system. On the other hands, the amount of produced $H_2SO_4$ phase was small. To investigate the effects of $SO_2$ solubility on Bunsen reaction, the continuous Bunsen reaction was performed at variation of the amounts of $SO_2$ gas. Also, it was carried out to make sure of the effects of partial pressure of $SO_2$ in the condition of 3bar of $SO_2-O_2$ atmosphere. As the results, the characteristic of Bunsen reaction was improved with increasing the amounts and solubility of $SO_2$ gas. The concentration of Bunsen products was changed by reverse Bunsen reaction and evaporation of HI after 12 h.

• Journal of the Korean Ceramic Society
• /
• v.12 no.4
• /
• pp.3-8
• /
• 1975

Hydration processes of the rapid hardening cement clinkers, which were synthesized from domestic alunite for major alumina source, limestone, kaolin and fluorite, were investigated by means of x-ray diffraction analysis, thermal analysis and microscopic observation etc. The clinkers were composed mainly of alite, calcium fluroaluminate (C11A7.CaF2) minerals. While the hydratio processes of the clinkers are altered by concentration of SO3 in the paste, calcium aluminate hydrates such as C4AH13, CAH10 and calcium monosulfate hydrate (C3A.CaSO4.12H2O) are formed at first and then some of them are transformed into ettringite(C3A.3CaSO4.32H2O) within 30~60 min. when the concentration of SO3 in the paste are enough. However the formed ettringite are changed slowly into calcium monosulfate hydrate as the concentration of SO3 become lowered, and the paste is hardened with these close-packed minerals. When the content of SO3 in clinker is so enough, calcium sulfoaluminate hydrates are found without any addition of anhydrite or hemi-hydrite.

• Korean Journal of Agricultural Science
• /
• v.11 no.1
• /
• pp.53-60
• /
• 1984

The followings are the results obtained from the investigation of isolation and cultural conditions of a fungus producing antibiotic from humus, spring soil, paddy, field and etc. 1. Among fungi which were capable of antimicrobial sub stance producing at the $45^{\circ}C$, Strain H-3 was selected as test st rain because of its efficiency in antimicrobial substance producing. 2. Strain H-3 was identified as a Aspergullus fumigatus by the mophological properties. 3. The compositions of optimun media for the production of antimicrobial substance were followed;glucose 20g, $NaNO_3$ 3g, $K_2HPO_4$ 1g, $CaCl_2$ 0.5g, $MgSo_4$ 0.5g, $FeSO_4$ 0.005g. 4. Optimum culture conditions were founded to be pH 5.0, $40^{\circ}C$ respectively. 5. The maximum antimicrobial substance producing obtained in this study was showed 14mm of clear zone after 72 hrs incubation under the optimum conditions. 6. AF-c substance was active against Gram-positive, Gram-negative bacteria, and yeast but not mold in its biological properties.

• Journal of the Korean Electrochemical Society
• /
• v.4 no.1
• /
• pp.14-20
• /
• 2001

The Langmuir adsorption isotherms of the under-potentially deposited hydrogen (UPD H) and the over-potentially deposited hydrogen (OPD H) at the single crystal Pt(100)/0.5 M $H_2SO_4$ and 0.5 M LiOH aqueous electrolyte interfaces have been studied using the phase-shift method. The phase-shift profile $({-\varphi}\;vs.\;E)$ for the optimum intermediate frequency can be used as a useful method to estimate the Langmuir adsorption isotherm $(\theta\;vs.\;E)$ at the interfaces. The equilibrium constant (K) for the OPD H and the standard free energy $({\Delta}G_{ads})$ of the OPD H at the Pt(100)/0.5M $H_2SO_4$ aqueous electrolyte interface are $1.5\times10^{-4}$ and 21.8 kJ/mol, respectively. At the Pt(100)/0.5 LiOH aqueous electrolyte interface, K transits from 1.9(UPD H) to $6.8\times10^{-6}$(OPD H) depending on the cathode potential (E) and vice versa. Similarly, ${\Delta}G_{ads}$ transits -1.6 kJ/mol (UPD H) to 29.5 kJ/mol (OPD H) depending on E and vice versa. The transition of K and ${\Delta}G_{ads}$ is attributed to the two distinct adsorption sites of the UPD H and OPD H on the Pt(100) surface. The UPD H and the OPD H at the Pt(100) interfaces are the independent processes depending on the H adsorption sites rather than the sequential processes for the cathodic $H_2$ evolution reactions.

• Journal of the Korean Chemical Society
• /
• v.45 no.1
• /
• pp.7-13
• /
• 2001

The interaction of benzenesulfonate anion and its derivatives ($C_6H_5SO_3^-, p-$CH_3C_6H_4SO_3^-, and $p-C_2H_5C_6H_4SO_3^-$) with the micellar system of cationic surfactant TTAB(tetradecyltrimethylammonium bromide) was studied by UV/Vis spectrophotometric method. The solubilization constants($K_s$) of benzenesulfonate anions into the micellar phase of this surfactant have been measured with the change of temperature. The effects of additives(n-pentanol and NaBr) on the solubilization of benzenesulfonate anions by this surfactant system have been also measured. There was a great decrease on the values of $K_s$ and CMC simultaneously with these additives so that the measured values of ln$K_s$ were linear relationships with the values of lnCMC. For the thermodynamic study, various thermodynamic parameters(${\Delta}G^0_s$, ${\Delta}H^0_s$ and ${\Delta}S^0_s$) have been calculated and analyzed from the dependence of Ks values on temperature.

• Korean Journal of Food Science and Technology
• /
• v.22 no.3
• /
• pp.343-349
• /
• 1990

The solubility of protein and phytate was measured at various pH's in distilled water and at various concentrations of NaCl, $CaCl_2\;and\;Na_2SO_3$ solutions, and then optimum condition for producing low phytate protein isolate from perilla flour was investigated. The protein solubility in water showed minimum at pH 4.0 and increased at pH higher or lower than 4.0, while phytate solubility was highest at pH 5.0 and decreased at pH higher or lower than 5.0. In NaCl solution, protein solubility was lowest between pH 3.0-4.0, while phytate solubility was high between pH 2.0-5.0 and abruptly decreased above PH 6.0. In $Na_2SO_3$ solution, protein solubility was lowest between pH 2.0-3.0 and phytate solubility showed maximum values between pH $5.0{\sim}6.0$, and it's solubility was low in 3% salt concentration at all pH ranges. In $CaCl_2$ solution, protein solubility in 3% salt concentration was relatively low at all pH ranges, and phytate solubility showed highest values between pH $2.0{\sim}3.0$ and abruptly decreased (1.0%) above pH 4.0. In order to make low phytate protein isolate, defatted perilla flour protein was extracted at pH9.0 and precipitated at pH 4.0 in 3% NaCl solution. The yield of low phytate protein isolate was 61.4% of total protein. This protein was found to contain 0.02% phytate by weight.

• Korean Journal of Soil Science and Fertilizer
• /
• v.14 no.3
• /
• pp.117-129
• /
• 1981

An experiment with the tobacco plant was conducted in the pots. A sandy humic soil was used with 2 levels of pH, 3.5 and 5.8 with 2 kinds of anions, Cl as $NH_4Cl$ and $SO_4$ as $(NH_4)_2SO_4$, and with 4 levels of pF, 1.5, 2.0, 2.5, and 3.5. The pH-treatment created different N-forms; $NH_4$ at low pH(3.5) and $NO_3$ at high pH (5.8). The results are summarized as follows: 1. At low pH (3.5) with high concentration of $NH_4$ given as $NH_4Cl$, the high content of $NH_4$ and Cl in tobacco resulted in plants suffering from $NH_4$ and Cl toxicity as well as Mn toxicity. As a result of these toxicity, an extremly abnormal growth of tobacco was clearly appeared. In the tobacco grown at low pH with $NH_4$ given as $(NH_4)_2SO_4$, a large amount of the $NH_4$ uptake developed Mg and Ca deficiencies. $NH_4-N$, which had been applied to the soil of high pH (5.8), was almost completely transformed into $NO_3-N$ by nitrification and, on this low acidic soil, the plants were all healthy regardless of Cl or $SO_4$ added together with $NH_4-N$. However, dry matter production was higher and maturity faster when $SO_4$ was used as anion than when Cl was used. 2. High moisture content in soil, to some extent, is necessary for a good development and growth of the tobacco plant. Phosphate uptake seemed to be limited at higher moisture stress. The dry matter yield of tops and roots of tobacco were in the order of pF 1.8 > 2.1 > 2.6 > 3.6, respectively. 3. Data of chemical analysis and dry matter yields of tops and roots showed that the tobacco plant followed the normal (C-A) concept. In the normal growth of plants, the carboxylate content of tops was quite comparable to the estimated (C-A) values. If $NH_4$ content of plants remains in quite high quantities, it must be analysed and taken into consideration for the (C-A) calculation. Al is not transported toward tops in toxic amounts due to its high immobility, it mostly stay in or on the roots, probably due to precipitation as a aolt. When Al is present in high quantities, it has to be considered into the (C-A) calculation.

• Korean Chemical Engineering Research
• /
• v.46 no.4
• /
• pp.686-691
• /
• 2008

There are no many research reports on the preparation of ZnO by electrochemical oxidation since the zinc oxide is very easily dissolved in an acidic or basic environment, even though zinc oxides have attracted many attentions because of their optical/electrical properties. In this paper, we describe the fabrication of self-ordered stripes of ZnO by anodization of Zn in an ethanolic sulfuric acid. The formation of stripes of ZnO originating from Zn is attributed to water-selective dissolution of ZnO during anodization. We study in detail the effects of concentration of $H_2SO_4$, applied potential, anodization time, and addition of a small amount of water on the fabrication of stripes of ZnO. Mechanisms for the fabrication of ZnO stripes are discussed in terms of the above-mentioned effects.