• Journal of Korean Society of Forest Science
• /
• v.87 no.2
• /
• pp.253-259
• /
• 1998

The stimulated secretion of golden varnish sap by the infection of microorganisms on the bark of Dendropanax morbifera Lev. was observed in the natural habitats. Four candidate strains of such microorganisms(i.e., Sb1, Sb2, Sb3 and Sb4) were isolated from the bark of D. morbifera which was infected in natural. Of them, Sb3 and Sb4 strains showed stimulated secretion of golden vernish sap with the greatest stimulation by Sb4 strains. The yield of golden varnish sap from the bark of D. morbifera was boosted about 3.4~7.7 times by the inoculation of Sb4 strain in compassion with that collected from lacquer tree(Rhus verniciflua Stokes) by the traditional method. The mycelium color of Sb4 strain was grayish white. The optimum growth temperatures and pH were ranged from 30 to $35^{\circ}C$ and from pH 6.5 to 7.0.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.13 no.2
• /
• pp.1-4
• /
• 1977

The author determined the relationship between the hauling veloicty and the hydrodynamic resistance of the sablefish pot shaped conic frustum like, and induced the formulae to determine the diameter of the main line and the net horse power of the pot hauler. The results are summarized as follows: 1. The maximum hydrodynamic resistance (with its weight in water) of the pot T(kg), when the bottom webbing is covered by a cloth to imitate the catches are scattered on the bottom, is eatimated as $$ T=120v^{1.1} (0.3{\leqq}v{\leqq}0.8) $$ where v denotes the hauling velocity of the pot in m/sec. 2. When P. P. 3 strand rope is used as main line, the diameter d(mm)is recommended to satisfy the formula $$ d=72 \frac{D}{H} V^{1.1} where H denotes the depth of the fishing ground and D the intervals of the pots linked to the main in m respectively. 3. The pot hauler must displace the net horse power p(ps) of $$ P= \frac{75}{120} \frac{D}{H} v^{2.1}$$

• Journal of the Korean Magnetics Society
• /
• v.13 no.4
• /
• pp.176-181
• /
• 2003

The magnetic domain walls at the edges of a large patterned and exchanged-biased NiO(10-60 nm)/NiFe(10 nm) bilayers and their motions with applied field were investigated by magnetic force microscopy. Three kinds of domain walls, namely, head-to-head zig-zag and tail-to-tail zig-zag Bloch walls and straight Neel walls were found at specific edges of the unidirectional biased NiO(30 nm)/NiFe(10 nm) bilayer having the exchange biasing field (H$\sub$ex/) of 21 Oe. No walls were observed for the strong exchange-biased bilayer (60 nm NiO, H$\sub$ex/ = 75 Oe), while the amplitude of the zig-zag domain increased with decreasing exchange biasing. This may be explained by mutual restraint between H$\sub$ex/ and the demagnetization field of edge. We similarly investigated the magnetization reversal process, the subsequent motion of the walls and identified the pinning and nucleation sites during reversal.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1656-1658
• /
• 2003

고전압 대전류 시스템에 사용하는 스위치의 기본 요구조건은 저가, 긴 수명, 적은 지터와 대용량 그리고 seal-off 형태로 쉽게 설치하여 운전하는 것이다. 본 논문은 고전압 대전류용 Seal-off TVS (Triggered Vacuum Switch)를 개발하는 것을 목적으로 하고있다. 제작한 TVS는 양전극과 음전극이 교대로 고정된 간격으로 각각 3개의 전극으로 배열되어 있으며 전극은 사다리꼴 모양으로 되어있고 트리거 시스템과 개스를 흡수하는 게터가 내부에 설치되어 있다. 제작한 스위치 내부는 약 $10^{-7}$ torr의 진공상태를 유지하고 있으며 세라믹 챔버를 사용하여 Seal-off 상태로 설계, 제작하였다. TVS의 에너지 최고 전달량은 74 C 이며 30 kV, 100 kA, $1{\sim}2$ ms의 스위치를 제작하여 시험을 하였다. 스위치 시험 장치는 200 ${\mu}F$, 22 kV 6개를 병렬로 연결한 커패시터 뱅크와 160 ${\mu}H$의 인덕터와 0.2 ${\Omega}$의 저항을 이용하여 시험 장치를 구성하였다. 본 논문은 제작한 스위치의 전기적인 특성 시험한 결과에 대하여 논하고자 한다.

• Journal of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.149-155
• /
• 1989

1H-nmr chemical shifts and lineshapes of amino-protons of thioacetamide in n-alcohols were determined. The chemical shifts are discussed by the Reichardt's solvent polarity parameter, $E_T(30)$. The following relationship between ${delta}_{obs}\;and\;E_T(30)$ was obtained, ${\delta}_{obs}=a{\cdot}E_T(30)＋b{\cdot}(E_T(30))_2$ where a is a characteristic constant for the protons of thioacetamide in n-alcohol solutions and b is a constant for the solute(TA)-solvent (n-alcohols) interactions. The barrier of the hindered rotation about the N-C(S) bond in TA was obtained by analysis of the lineshape of the amino-protons in TA. The behavior of the hindered rotation as well as chemical shifts of the amino-protons in TA has been found to be closely related to the $E_T(30)$ of n-alcohols.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.4
• /
• pp.567-572
• /
• 1997

The ZnO powder was prepared under glycothermal conditions by precipitation from metal nitrates with aqueous potassium hydroxide. The fine powder was obtained at temperatures as low as 225 to $275^{\circ}C$, The microstructure and phase of the powder were studied by SEM and XRD. The properties of the ZnO powder were studied as a function of various parameters (reaction temperature, reaction time, solid loading, etc). The average particle size of the ZnO increased with increasing reaction temperature. After glycothermal treatment at $225^{\circ}C$ for 8 h, the average particle size of the ZnO powder was about 150 nm and the particle size distribution was narrow.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.4
• /
• pp.223-229
• /
• 2016

This study proposes a new technology for a smart damper with flag-shaped behavior using the combination of magnetic friction and rubber springs. The magnet provides friction and, thus, energy dissipation, and the rubber springs with precompression contribute to present self-centering capacity of the damper. To verify their performance, this study conducts dynamic tests of magnet frictional dampers and precompressed rubber springs. For the purpose, hexahedron Neodymium (NdFeB) magnets and polyurethane rubber cylinders are used. In the dynamic tests, loading frequency varies from 0.1 to 2.0 Hz. The magnets provide almost perfect rectangular behavior in force-deformation curve. The rubber springs are tested without or with precompression. The rubber springs show larger rigid force with increasing precompression. Lastly, this study discusses combination of rigid-elastic behavior and friction to generate 'flag-shaped' behavior for a smart damper and suggests how to combine the magnets and the rubber springs to obtain the flag-shaped behavior.

• Journal of the Korean Chemical Society
• /
• v.34 no.6
• /
• pp.509-516
• /
• 1990

1H-nmr chemical shifts and lineshapes of amino-protons of acetamide (AA) in n-alcohols were determined. The chemical shifts are discussed by the Reichardt's solvent polarity parameter, E$_{T}$(30). The following relationship between $\delta$obs and E$_{T}$(30) was obtained. ${\delta}_{obs}$ = ${\delta}_{o}$ ＋ aE$_{T}$ (30) ＋ b[E$_{T}$(30)]$^2$ where ${\delta}_{o}$ is the chemical shift of the solute in gaseous state or at $E_{T}$(30) = 0, a is a characteristic constant for the protons of AA in n-alcohol solutions and b is a constant for the solute (AA)-solvent (n-alcohols) interaction. The barrier of the hindered rotation about the N-C(O) bond in AA was obtained by analysis of the lineshapes of the amino-protons in AA. The behavior of the internal rotation as well as chemical shifts of the amino-protons in AA has been found to be closely related to the $E_{T}$(30) of n-alcohols.

• Journal of the Korean Magnetics Society
• /
• v.19 no.3
• /
• pp.94-99
• /
• 2009

We have studied the effects of oxygen partial pressure change on the physical properties of the $La_{0.7}Ca_{0.3}MnO_3$ thin films grown by Pulsed laser Deposition. Contrary to the previous reports, thin films of high curie temperature were successfully synthesized at very low oxygen partial pressure ($1.0{\times}10^{-5}$, $1.0{\times}10^{-6}Torr$). These observations indicate that the shape of plasma plume and the kinetic energy of the ablated species in it play an important role in determining the quality of samples. We also fabricated p-n heterojunction of $La_{0.7}Ca_{0.3}MnO_3$ and Nb-doped $SrTiO_3$. The current-voltage curves show rectifying behavior and, furthermore, the current responses to the applied magnetic field, indicating a potential possibility of device applications.

• Applied Chemistry for Engineering
• /
• v.32 no.1
• /
• pp.91-96
• /
• 2021

This study was conducted to improve the operating conditions of an adsorption tower filled with potassium impregnated activated carbon for high hydrogen sulfide capture capacity. Heat treatment modified the surface properties of activated carbon, and ultimately determined its adsorption capacity. The activated carbon doped with potassium showed 57 times more adsorption at room temperature than that of using the raw adsorbent. It is believed that uniform pore formation and strong bonding of the potassium on the surface of carbon contributed to the chemical and physical absorption of hydrogen sulfide. The SEM analysis on the surface structure of various commercial carbons showed that the modification of surface properties through the heat treatment generated the destruction of pore structures resulted in the decrease of the absorption performance. The pressure drop across the activated carbon bed was closely related with the grain size and shape. The optimum size of irregularly shaped activated carbon granules was 2~4 mesh indicating economical feasibility.