• Journal of the Korean Society for Heat Treatment
• /
• v.33 no.1
• /
• pp.20-24
• /
• 2020

Single crystal diamonds are in great demand in such fields as mechanical, electronic applications and optoelectronics. Large area single crystal diamonds are attracting attention in future industries for mass production and low cost. In this study, hot filament CVD (HFCVD) is used to grow large area single crystal diamond. However, the growth rate of large area single crystal diamond using HFCVD is known to be very low. The goal of this study is to use single crystal diamond substrates in HFCVD with methane-hydrogen gas mixtures to increase the growth rate of single crystal diamond and to optimize the conditions by analysing the effects of deposition conditions for high quality crystallinity. The deposition pressure, the ratio of CH₄/H₂ gas, the substrate temperature and the distance between the filament and the substrate were optimized. The sample used a 4×4 (mm²) size single crystal diamond substrate (100), the CH₄/H₂ gas ratio was fixed at 5%, the substrate temperature was synthesized to about 1000℃. At this time, the deposition pressure was changed to three types of 50, 75, 85 Torr and deposited. Finally, optimization was investigated under pressure conditions to analyse the growth rate and quality of single crystal diamond.

• Journal of Ginseng Research
• /
• v.29 no.3
• /
• pp.145-151
• /
• 2005

This study was carried out to determine the optimal submerged culture conditions for production of ginseng root containing germanium using plant tissue culture technology. The ginseng (Panx ginseng C.A. Meyer) .cot induced by plant growth regulators of 0.5 mg/L BAP and 3.0 mg/L NAA was cultured on SH medium and the effects of various $GeO_2$ concentrations, addition time of $GeO_2$ and pH of medium were investigated on fresh weight, saponin production and germanium accumulation in ginseng root. Optimal $GeO_2$ concentrations for fresh weight, saponin and germanium content were 10, 0 and 110ppm, respectively. When $GeO_2$ was added after 2 weeks cultivation of ginseng root, germanium content was higher than that of adding $GeO_2$ at the initial cultivation time, but saponin content and fresh weight were lower. pH 5.5 was found to be the most favorable condition for the growth of ginseng root and germanium accumulation, but saponin production was best at pH 6.0.

• Journal of Applied Biological Chemistry
• /
• v.65 no.4
• /
• pp.447-451
• /
• 2022

Phytoestrogenic S-equol production in human gut exclusively depends on the biotransformation of daidzein to dihydrodaidzein (DHD). With a growing demand for the DHD enriched biomaterials, the commercial soybean hypocotyl extract (SHE) was chosen as a substrate for the microbial DHD production by human gut bacterium MRG-1, anaerobic DHD producer. To optimize the production of DHD, anaerobic fermentation conditions, including sterilization time, growth stage of inoculum, and growth media, were investigated. Maximum DHD production (1.2 g/L) was achieved after 48 h incubation when 1% (w/v) of SHE in the 20-min-sterilized Gifu Anaeboic Medium media was inoculated with OD₆₀₀ 0.3-0.4 of MRG-1. This is the first report that crude soy biomaterial, instead of pure compounds, such as daidzin and daidzein, is utilized for the production of the DHD enriched biomaterial.

• Journal of Surface Science and Engineering
• /
• v.56 no.6
• /
• pp.437-442
• /
• 2023

This research aims to enhance the efficiency of Pt/C catalysts due to the limited availability and high cost of platinum in contemporary fuel cell catalysts. Nano-sized platinum particles were distributed onto a carbon-based support via the polyol process, utilizing the metal precursor H₂PtCl₆·6H₂O. Key parameters such as pH, temperature, and RPM were carefully regulated. The findings revealed variations in the particle size, distribution, and dispersion of nano-sized Pt particles, influenced by temperature and pH. Following sodium hydroxide treatment, heat treatment procedures were systematically executed at diverse temperatures, specifically 120, 140, and 160 ℃. Notably, the thermal treatment at 140 ℃ facilitated the production of Pt/C catalysts characterized by the smallest platinum particle size, measuring at 1.49 nm. Comparative evaluations between the commercially available Pt/C catalysts and those synthesized in this study were meticulously conducted through cyclic voltammetry, X-ray diffraction (XRD), and field-emission scanning electron microscopy-energy dispersive X-ray spectroscopy (FE-SEM EDS) methodologies. The catalyst synthesized at 160 ℃ demonstrated superior electrochemical performance; however, it is imperative to underscore the necessity for further optimization studies to refine its efficacy.

• Corrosion Science and Technology
• /
• v.22 no.1
• /
• pp.21-29
• /
• 2023

In this paper, a SiC nano electroless nickel plating layer with excellent corrosion resistance was fabricated using the Taguchi method. The electroless plated low carbon steel was subjected to tests to examine the influence of corrosive media, microhardness, and corrosion rate on the corrosion resistance of this alloy. Three different corrosive media (HCl, Na₂SO₄, and NaCl) at various temperatures (80, 90, and 100 ℃) were used, and at three different times (40, 80, and 120 min.) with a speed of stirring equal to 500 rpm. The results of microhardness were found from 134.276 HV to 278.578 HV at various conditions, while the corrosion rate results were obtained from 0.89643 mpy to 7.12571 mpy at different circumstances. Corrosion, and mechanical characteristics were explained using Taguchi design. Taguchi technique was used to account for all possible combinations of elements in order to conduct a complete study. Models that link the response and procedure parameters were developed using the results of these tests, and the analysis of variance was utilized to validate these models (ANOVA). For maximum efficiency, a function called "desirability" was applied to all responses at once.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.16 no.4
• /
• pp.263-271
• /
• 2016

Background: Bone injury is common in many clinical situations, such as surgery or trauma. During surgery, excessive reactive oxygen species (ROS) production decreases the quality and quantity of osteoblasts. Remifentanil decreases ROS production, reducing oxidative stress and the inflammatory response. We investigated remifentanil's protective effects against $H_2O_2$-induced oxidative stress in osteoblasts. Methods: To investigate the effect of remifentanil on human fetal osteoblast (hFOB) cells, the cells were incubated with 1 ng/ml of remifentanil for 2 h before exposure to $H_2O_2$. For induction of oxidative stress, hFOB cells were then treated with $200{\mu}M$ $H_2O_2$ for 2 h. To evaluate the effect on autophagy, a separate group of cells were incubated with 1 mM 3-methyladenine (3-MA) before treatment with remifentanil and $H_2O_2$. Cell viability and apoptotic cell death were determined via MTT assay and Hoechst staining, respectively. Mineralized matrix formation was visualized using alizarin red S staining. Western blot analysis was used to determine the expression levels of bone-related genes. Results: Cell viability and mineralized matrix formation increased on remifentanil pretreatment before exposure to $H_2O_2$-induced oxidative stress. As determined via western blot analysis, remifentanil pretreatment increased the expression of bone-related genes (Col I, BMP-2, osterix, and $TGF-{\beta}$). However, pretreatment with 3-MA before exposure to remifentanil and $H_2O_2$ inhibited remifentanil's protective effects on hFOB cells during oxidative stress. Conclusions: We showed that remifentanil prevents oxidative damage in hFOB cells via a mechanism that may be highly related to autophagy. Further clinical studies are required to investigate its potential as a therapeutic agent.

• Biomolecules & Therapeutics
• /
• v.14 no.3
• /
• pp.143-147
• /
• 2006

In the mouse leukemic monocyte cell line RAW 264.7, the vacuolar-type $(H^+)$-ATPase (V-ATPase) inhibitor bafilomycin $A_1$ at 10 and 100 nM decreased cell growth and survival as determined by 3-(4,5-dimethyl(thiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay in a concentration-dependent manner. At such concentrations, bafilomycin $A_1$ induced nitric oxide (NO) production through the expression of inducible nitric oxide synthase (iNOS). The bafilomycin $A_1$-induced NO production was inhibited by the NOS inhibitor $N^G$-monomethyl-L-arginine acetate (L-NMMA). Our findings suggest that the V-ATPase inhibitor bafilomycin $A_1$ induces NO production through the expression of iNOS protein.

• Korean Journal of Plant Resources
• /
• v.28 no.3
• /
• pp.305-311
• /
• 2015

This study investigated in vitro antioxidant, anti-inflammatory and cytotoxicity on human lung epithelial A549 cells of different solvent extracts from Jerusalem artichoke (Helianthus tuberosus L.) tuber. The EtOH extract contained amounts of phenolics (22.20 tannic acid equivalent ㎎/ɡ) and exhibited the highest antioxidant activity and anti-inflammatory activity. Several methods were employed for measure the antioxidant activity: 1,1-diphenyl-2-picrylhydrazyl radical scavenging activity (IC₅₀ = 206.79 ㎍/㎖), reducing power activity (21.26 ascorbic acid equivalent ㎎/ɡ) and total antioxidant activity (19.05 ascorbic acid equivalent ㎎/ɡ). Meantime, the EtOH extract inhibited the NO production completely with a concentration of 800 ㎍/㎖. Besides, the H₂O extract exhibited more potent effect on human lung epithelial A549 cells. This study suggested that Jerusalem artichoke tuber had antioxidant, anti-inflammatory and cytotoxicity on human lung epithelial A549 cells.

• Transactions of Materials Processing
• /
• v.31 no.5
• /
• pp.253-260
• /
• 2022

In this study, the microstructural characteristics of a high-speed-extruded Mg-5Bi-3Al (BA53) alloy and its tensile, compressive, and high-cycle fatigue properties are investigated. The BA53 alloy is successfully extruded at a die-exit speed of 16.6 m/min without any hot cracking using a large-scale extruder for mass production. The homogenized BA53 billet has a large grain size of ~900 ㎛ and it contains fine and coarse Mg₃Bi₂ particles. The extruded BA53 alloy has a fully recrystallized microstructure with an average grain size of 33.8 ㎛ owing to the occurrence of complete dynamic recrystallization during high-speed extrusion. In addition, the extruded BA53 alloy contains numerous fine lath-type Mg₃Bi₂ particles, which are formed through static precipitation during air cooling after exiting the extrusion die. The extruded BA53 alloy has a high tensile yield strength of 175.1 MPa and ultimate tensile strength of 244.4 MPa, which are mainly attributed to the relative fine grain size and numerous fine particles. The compressive yield strength (93.4 MPa) of the extruded BA53 alloy is lower than its tensile yield strength, resulting in a tension-compression yield asymmetry of 0.53. High-cycle fatigue test results reveal that the extruded BA53 alloy has a fatigue strength of 110 MPa and fatigue cracks initiate at the surface of fatigue test specimens, indicating that the Mg₃Bi₂ particles do not act as fatigue crack initiation sites. Furthermore, the extruded BA53 alloy exhibits a higher fatigue ratio of 0.45 than other commercial extruded Mg-Al-Zn-based alloys.

• Journal of Life Science
• /
• v.30 no.9
• /
• pp.743-748
• /
• 2020

Sulfate is a reductant that competes for electrons and may lower CH₄ production in the rumen. This study was designed to evaluate the beneficial effect of detoxified sulfur powder supplementation on in vitro rumen fermentation and methane mitigation. A ruminally cannulated Holstein Friesian cow was used as a rumen fluid source, and commercial pelleted concentrate was used as a substrate at 1 g dry matter. Treatments included the addition of detoxified sulfur powder at the rate of 0% (Control), 0.2% (T1), 0.4% (T2), 0.6% (T3), 0.8% (T4), and 1.0% (T5) as dry matter (DM) basis. The pH, total gas (TG), methane (CH₄) production, DM digestibility, organic matter (OM) digestibility, and volatile fatty acids (VFA) production were analyzed after 12 hr of incubation. The results showed that CH₄ production was significantly lowest in T1 (13.78 ml) but highest in the control (20.16 ml). Insignificantly higher total VFA was observed in control and T1 (64.99 and 64.28 mM, respectively) compared to other treatments after 12 hr of incubation. After 12 hr of incubation, the significantly lowest acetate:propionate was observed in T1 (1.90) while the highest was observed in T4 (2.44). However, no significant differences were recorded for pH, TG, DM digestibility, OM digestibility, acetate, propionate, and butyrate between the control and T1. Total number of bacterial DNA copies was significantly lower in the treatment group than the control. Therefore, it can be concluded from this study that detoxified sulfur at 0.2% inclusion level is optimal for production performance and ruminal CH₄ mitigation.