• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.6 no.4
• /
• pp.44-49
• /
• 2007

In this paper, propose an optimal design to improve the mechanical efficiency of gate valve made by forging method. In order to design the experiments using table of orthogonal array and optimization design is conducted as application of real response model to Taguchi method based approximation model using computer simulation. Also, from verification of the response model with optimized results was confirmed that usefulness and reliance of application Taguchi method to structural optimum design using finite element analysis and equation.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.3
• /
• pp.418-422
• /
• 2009

We synthesized new electroluminescence materials [(1,10-phenanthroline)(8-hydroxyquinoline)] Zn(phen)q and investigated their electron transport properties. We used Zn(phen)q and $Alq_3$ for the conductive materials and measured their electron transport properties as a function of the organic layer thickness. The difference between Zn(phen)q and $Alq_3$ as electron transporting materials suggests that the electrical properties depends on the carrier injection.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.34 no.2
• /
• pp.41-47
• /
• 2024

In this study, the resistance characteristics of semi-insulating SiC single crystals grown using the PVT method were investigated, considering the purity level of SiC source powders used in PVT growth and the cooling procedure after crystal growth. Two β-SiC powders with different purities were employed, and the cooling rate after growth was adjusted to achieve various resistance values. 4-inch HPSI-SiC ingots were grown using the PVT method, utilizing SiC powders with low nitrogen concentration and relatively high nitrogen concentration. These ingots were then subjected to different cooling procedures to modify the cooling rate. Transmission/absorption spectra and crystal quality of the grown crystals were analyzed through UV/VIs/NIR spectroscopy and X-ray rocking curve analysis, respectively. Additionally, electrical properties were investigated through non-contact resistivity analysis to identify the dominant factors influencing resistivity properties.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2008.10a
• /
• pp.287-300
• /
• 2008

Airflow distributions along tunnel and over the cross section are critical in selecting installation location of the velocity monitor to obtain the representative data for ventilation as well as fire safety systems. This paper aims at performing CFD and on-site studies to analyze the longitudinal and cross-sectional distributions of the air velocity in tunnels employing longitudinal and semi-transversal ventilation systems. This study can ultimately contribute to selecting the monitor type as well as the optimal installation locations in vehicle tunnel.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04c
• /
• pp.121-122
• /
• 2008

Blue emitting materials have been explored by various researchers. However, blue-emitting materials with high luminous efficiency, good color purity, and thermal stability are still much desired. In this study, we synthesized a new blue luminescent material, $SnDP(HPB)_2$ which is low molecular compound and thermal stability. The PL spectrum of $SnDP(HPB)_2$ was observed blue at the wavelength of 447nm. The ionization potential(IP) and the electron affinity(EA) of $SnDP(HPB)_2$ was measured to be 6.7 eV and 3.0 eV, respectively. The fundamental structure of the OLED was ITO/NPB/$SnDP(HPB)_2/Alq_3$/LiF/Al. As a Result, we obtained to enhance the performance of blue OLED.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.6 no.1
• /
• pp.15-20
• /
• 2006

In this paper we study the exact controllability for the nonlinear fuzzy control system with nonlocal initial condition in $E_N^n$ by using the concept of fuzzy number of dimension n whose values are normal, convex, upper semicontinuous and compactly supported surface in $R^n$. $E_N^n$ be the set of all fuzzy numbers in $R^n$ with edges having bases parallel to axis $X_1,X_2,\;,X_n$.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.57-58
• /
• 2011

본 논문은 눈의 무게에 따른 압력센서의 전압변화를 이용하여 모터 구동 제어 및 제설이 가능한 방법을 제안하였다. 자동 제설 장치는 눈의 무게에 따른 압력 센서의 전압변화를 MCU의 내부 ADC를 이용하여 센서의 아날로그 값을 디지털 값으로 변환 한다. 변환한 디지털 값을 이용하여 MCU에서 무게를 판단하고, 그에 따라 모터의 구동을 제어 하게 된다. MCU의 무게 판단은 압력 센서에 가해지는 무게에 따라 변하는 압력센서의 가변저항 특성을 이용하게 되며, 직렬 저항 회로를 구성하여 압력센서의 전압 변화의 값을 ADC의 입력으로 주게 된다. 입력된 아날로그 값을 ADC로 디지털 값으로 변환하게 된다. 변환된 디지털 값을 MCU에서 판단하게 되며, 판단의 결과로 모터의 구동을 제어하게 된다. 즉, 이러한 시스템을 통하여 비닐하우스의 지붕의 눈을 실시간으로 자동 제설하게 된다.

• Proceedings of the KIEE Conference
• /
• 1993.11a
• /
• pp.44-46
• /
• 1993

This paper presented the four section sliding mode control algorithm based on indirect field oriented control method and PI current controller design in a synchronous frame and applied it to the position control of LIM.

• 대한핵의학회:학술대회논문집
• /
• 1992.06a
• /
• pp.197.1-197.1
• /
• 1992

• Korean Journal of Environmental Biology
• /
• v.34 no.1
• /
• pp.37-40
• /
• 2016

A new species of the cave-dwelling springtail Lethemurus coreanus Chang and Bae, sp. n. is described from Korea. Lethemurus coreanus can be distinguished from congeners by the spine-like setae on the tibiotarsus, numbers of dental spines, number of setae on the trochanteral organ, and body macrochaetae chaetotaxy. A key to the species of Lethemurus is provided.