• Journal of Powder Materials
• /
• v.9 no.6
• /
• pp.394-408
• /
• 2002

Nanostructured high strength metastable Al-, Mg- and Ti-based alloys containing different amorphous, quasicrystalline and nanocrystalline phases are synthesized by non-equilibrium processing techniques. Such alloys can be prepared by quenching from the melt or by powder metallurgy techniques. This paper focuses on one hand on mechanically alloyed and ball milled powders containing different volume fractions of amorphous or nano-(quasi)crystalline phases, consolidated bulk specimens and, on the other hand. on cast specimens containing different constituent phases with different length-scale. As one example. $Mg_{55}Y_{15}Cu_{30}$- based metallic glass matrix composites are produced by mechanical alloying of elemental powder mixtures containing up to 30 vol.% $Y_2O_3$ particles. The comparison with the particle-free metallic glass reveals that the nanosized second phase oxide particles do not significantly affect the glass-forming ability upon mechanical alloying despite some limited particle dissolution. A supercooled liquid region with an extension of about 50 K can be maintained in the presence of the oxides. The distinct viscosity decrease in the supercooled liquid regime allows to consolidate the powders into bulk samples by uniaxial hot pressing. The $Y_2O_3$ additions increase the mechanical strength of the composites compared to the $Mg_{55}Y_{15}Cu_{30}$ metallic glass. The second example deals with Al-Mn-Ce and Al-Cu-Fe composites with quasicrystalline particles as reinforcements, which are prepared by quenching from the melt and by powder metallurgy. $Al_{98-x}Mn_xCe_2$ (x =5,6,7) melt-spun ribbons containing a major quasicrystalline phase coexisting with an Al-matrix on a nanometer scale are pulverized by ball milling. The powders are consolidated by hot extrusion. Grain growth during consolidation causes the formation of a micrometer-scale microstructure. Mechanical alloying of $Al_{63}Cu_{25}Fe_{12}$ leads to single-phase quasicrystalline powders. which are blended with different volume fractions of pure Al-powder and hot extruded forming $Al_{100-x}$$(Al_{0.63}Cu_{0.25}Fe_{0.12})_x$ (x = 40,50,60,80) micrometer-scale composites. Compression test data reveal a high yield strength of ${\sigma}_y{\geq}$700 MPa and a ductility of ${\varepsilon}_{pl}{\geq}$5% for than the Al-Mn-Ce bulk samples. The strength level of the Al-Cu-Fe alloys is ${\sigma}_y{\leq}$550 MPa significantly lower. By the addition of different amounts of aluminum, the mechanical properties can be tuned to a wide range. Finally, a bulk metallic glass-forming Ti-Cu-Ni-Sn alloy with in situ formed composite microstructure prepared by both centrifugal and injection casting presents more than 6% plastic strain under compressive stress at room temperature. The in situ formed composite contains dendritic hcp Ti solid solution precipitates and a few $Ti_3Sn,\;{\beta}$-(Cu, Sn) grains dispersed in a glassy matrix. The composite micro- structure can avoid the development of the highly localized shear bands typical for the room temperature defor-mation of monolithic glasses. Instead, widely developed shear bands with evident protuberance are observed. resulting in significant yielding and homogeneous plastic deformation over the entire sample.

• Journal of Plant Biotechnology
• /
• v.34 no.1
• /
• pp.1-6
• /
• 2007

Effect of BA concentrations and culture methods on in vitro plant multiplication from shoot-tip cultures of Wasabia japonica was studied. Shoot-tips with leaf primordia and apical meristem were cultured on MS basal medium for all the experiments. Liquid medium for 2 weeks followed by semi-solid medium for 4 weeks containing 1.0 mg/L BA was the best to number of shoots (22.8) and shoot length (3.5 cm). Shoots proliferated could be divided into ca. 5 to 11 of cultures for the multiplication of plantlets. Divided plantlets showed root formation (90%) well onto MS basal medium without growth regulators like IBA and NAA. After rooting, all the plantlets transferred into the pots containing composed soil (bio-media Co., peatmoss $8{\sim}10%$, coir dust $66{\sim}70%$, zeolite $13{\sim}17%$, vermiculite $3{\sim}7%$, perlite $2{\sim}4%$) and grown well into whole plants with multiple shoots.

• Applied Chemistry for Engineering
• /
• v.5 no.6
• /
• pp.1036-1043
• /
• 1994

The silane crosslinking method was applied for the crosslinking of polyethylene (PE). Crosslinking of PE was performed by, first grafting vinyltrimethoxysilane(VTMOS) to the main chain of PE using an extruder at $200{\sim}210^{\circ}C$, followed by exposure to three different silane crosslinking conditions (1. immersed in $80^{\circ}C$ water, 2. at $80^{\circ}C$ air forced convection oven, 3. exposed to air at room temperature ). The thermal characteristic changes of PE resins with respect to the silane crosslinking conditions were studied by measuring the crystalline melting temperature, density and crosslinking reaction rate. Because silane crosslinking was carried out at solid state, crystalline melting temperature, crystallinity, crystal growth rate, crosslinking reaction rate and the change in the density of silane crosslinked PE were affected by crosslinking condition and the type of base resin. The properties of silane crosslinked PE were different from those of Peroxide crosslinked PE which was crosslinked at the molten state. It was found, from the result of DSC analysis, that silane crosslinked linear low density polyethylene(LLDPE) crosslinked at room temperature had no secondary melting peak because the crosslinking reaction proceeds slowly as the crystalline grows. After crystallization, the melting point of PE was lowered by crystalline interruption of crosslinked site.

• Journal of Mushroom
• /
• v.16 no.3
• /
• pp.162-170
• /
• 2018

To improve the productivity of Pleurotus ostreatus, different conditions of liquid spawn culture were tested. The optimum culture conditions were potato dextrose broth, incubation temperature of $22^{\circ}C$, and pH 6. Fifteen different media ('A' to 'O') containing 0.3% soybean meal (SM) were prepared by varying sugar and glucose contents. The cultures were propagated in SM media for 14 days, at $22^{\circ}C$, and pH 6. Their absorbances were higher after 14 days of incubation in the media containing both sugar and glucose. In particular, the absorbance of media containing 5 to 20% of glucose alone ('C', 'D', 'E', and 'F') tended to increase in the incubation period. Dry cell weight was lower in media containing less than 20% sugar or glucose alone than in media containing 30% sugar ('A') or 30% glucose ('B') alone. In sawdust media, in 900 mL-bottle, the optimum inoculation volume of liquid spawn was 15 to 20 mL. The texture of the mushroom cultivated with the liquid spawn was superior to that cultivated in the solid spawn.

• Journal of the Korean association of regional geographers
• /
• v.3 no.1
• /
• pp.155-163
• /
• 1997

The Mongolian ger is ideally suited to the mongol's steppe climate and the nomadic way of life. This is a multipurpose dwelling which can be easily collapsed, transported to another place and put up again fully preserving its original shape. The pastoral nomadic ger has two key components: the wooden framework and the felt cover. The wooden parts are the walls(khana), the long poles(un), the smoke escape(toono) and its supports(bagana). One wall consists of 10-15 branches of willow tree. each about 1.5m high bound together in a way making it possible to fold it for transportation and then unfold it like an accordion. The unfolded walls are connected to form a circle. The long poles(un) are fastened to the upper part of the walls, with the other end passed through the toono hole, the only sky window and smoke escape through it from the ger. The toono is propped up by two posts, called bagana. All this forms the wooden framework of the ger, which is covered with felt. When the herders fire up their metal stoves, the temperature inside the ger becomes quite comfortable. Because the nomads live in a climate where there is only one growing season in a year, they do not make long migrations to new pastures. Livestock subsist on standing vegetation for eight months of the year. The basic pasture migration strategy is to leave enough standing vegetation at the end of the growing season in September to suffice until the new growth appears the following May. Mongolians use a type of compressed tea leaf that is called "brick" tea in English because it is rock solid and roughly the shape of a brick. And they consume a larger percent(88%) of fat from animal products such as meat, milk, butter, and cheese than any other people in the world. Milk products made from the milk of sheep, yak, and goats are major foods in the nomad's diet, but they are produced mainly in summer when all the animals are lactating. Mongolians made their special nomadic food culture on the steppe.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.1
• /
• pp.46-51
• /
• 2006

Phosphorus accumulation in fertilized soils becomes serious problem for agriculture and the environment. In this investigation, we conducted a laboratory scale investigation to find the most desirable displacement methods of the adsorbed phosphate onto the soil particle surfaces. Soil samples which contained high amount of phosphate were collected at two different depths (0-10 cm and 10-20 cm) from four locations at the moderate highland located in Nonsan, Chungnam. To observe the mobilization of solid-phase phosphate, soil samples were equilibrated with oxalic acid solutions ranging from $10^{-5}$ to $10^{-1}cmol\;L^{-1}$ with the dilution factors of 1:1, 1:2.5, 1:5, 1:10, and 1:20. The mineralized P sharply increased as the concentration of oxalic acid was greater than $5{\times}10^{-4}cmol\;L^{-1}$ under dilution factors of 1:1, 1:2.5, and 1:5. The breaking concentration of oxalic acid was lowered to $10^{-4}cmol\;L^{-1}$ and $5{\times}10^{-5}cmol\;L^{-1}$ for dilution factors of 1:10 and 1:20, respectively. The curve fit obtained from the graph can be described by exponential growth when the dilution factors were 1:1, 1:2.5, and 1:5 while the sigmoidal shape for 1:10 and 1:20, showing the mineralization of P were significantly dependent on the dilution factor.

• Korean Journal of Plant Tissue Culture
• /
• v.25 no.1
• /
• pp.1-5
• /
• 1998

This study describes the effect of the growth regulators such as 2,L-D and BA, on the structural abnormalities of somatic embryos derived from leaf explants of Angelica gigas Nakai, Also, the relationship between the cotyledon number of a somatic embryo and its germinability is explored. Embryogenic calli were selected from calli formed on explants cultured on MS solid basal medium supplemented with 0.5mg/L 2,4-D, 1mg/L 2,4-D, 1mg/L plus 0.1mg/L BA, and 1 mg/L 2,4-D plus 0.5mg/L BA. Cotyledonary abnormalities were observed in somatic embryos which were developed from embryogenic calli cultured on MS medium containing 1mg/L 2,4-D for 8 weeks and then subcultured on 2,4-D free MS medium for 3 weeks. The frequency of abnormalities was as follows: 22.8% one cotyledon, 42.5% two cotyledons, 16.8% three cotyledons, 7.8% four cotyledons, 1.8% five cotyledons, and 8.2% jar shaped cotyledon. In addition, ABA treatment indicated an improvement of the somatic embryo with normal cotyledon (65.3%). ABA was important role to the high production of normal somatic embryos. Two cotyledon embryos showed germinability 77.8%. However the germinability of somatic embryos with anomalous cotyledons was prominently low: One cotyledon, 62.5%; three cotyledons, 43.3%; four cotyledons, 60%; five cotyledons, 50% and jar shaped cotyledon, zero%. Thus, germinability was essentially, inversely proportional to cotyledon number.

• Journal of Plant Biotechnology
• /
• v.38 no.4
• /
• pp.258-262
• /
• 2011

Embryogenic callus was induced from the cultures of immature embryos of Camellia japonica L. on Murashige & Skoog's (MS) solid medium supplemented with 1 mg/L 2,4-dichlorophenoxy acetic acid (2,4-D), and then the embryogenic callus was proliferated on same medium for 4 weeks over. The embryogenic callus was sub-cultured on MS basal medium without 2,4-D to produce coyledonary stage of somatic embryo. The frequency (%) of somatic embryogenesis was 25.1%, and the majority of somatic embryos formed had a abnormal morphology with cupshaped cotyledon (48.3%), one cotyledon (12.6%), three cotyledons (9.4%), four cotyledons (1.9%), whereas was only normal morphology with two cotyledon (27.5%). When the somatic embryos with normal or abnormal cotyledons transfer to MS basal medium or $\frac{1}{2}$ MS medium with/or without plant growth regulators ($GA_3$, IBA) for regeneration, the frequency (%) of two-cotyledon embryos regenerated into plantlets was higher 11.1% than one cotyledon (0.0~8.3 %), three cotyledons (0.0~5.8%), four cotyledons (0.0%), cup-shaped (0.3~4.2%). These results demonstrated that the anomalous cotyledons of somatic embryos could caused to decrease the rate of plant regeneration.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.12
• /
• pp.1659-1666
• /
• 2000

Two experiments were conducted to determine the effects of Leucaena leucocephala (leucaena) and Gliricidia sepium (gliricidia) supplementation on intake, digestion, outflow rates, microbial protein yield and live-weight changes in sheep fed with ammoniated rice straw (ARS). In experiment 1, three rumen cannulated Japanese Corriedale wether (mean body weight of 35.6 kg) in $3{\times}3$ Latin Square Design were used. Animals were fed ad libitum ARS alone, or supplemented with 200 g of either leucaena or gliricidia. In experiment 2, twenty-four growing native Philippine sheep with average body weight of $13.5{\pm}0.25kg$ were used in a completely randomized design (CRD) and offered similar diets to those of experiment 1. Supplementation increased total dry matter intake and nutrient digestibility except for fiber (p<0.05) without affecting ARS consumption. Nitrogen balance revealed that absorbed and retained N was significantly higher in leucaena and gliricidia. The significant improvement in N utilization and more digestible OM intake brought about by the inclusion of leucaena and gliricidia to ARS resulted in increased (p<0.05) microbial N yield. Efficiency of microbial N supply in supplemented group was not significantly different, but higher (p<0.05) than the 24.92 g N/kg DOMR for ARS group. Liquid outflow rate was 7.8 and 6.8 %/h, while the solid phase of rumen digesta was 4.4 and 3.8 %/h for the leucaena and gliricidia group respectively, which were significantly higher than 5.30 and 2.50 %/h in the control diet. The increase in total DMI resulted to higher (p<0.01) growth performance and efficient feed utilization. Average daily gain (ADG) was 19.3, 34.6 and 33.9 g/d for the ARS, leucaena and gliricidia respectively. It is therefore concluded that addition of leucaena and gliricidia to ARS in could increase nutrient intake and digestibility, subsequently improving N utilization and livestock performance.

• Journal of Plant Biotechnology
• /
• v.40 no.1
• /
• pp.37-42
• /
• 2013

Rice is one of the most important cereal crops as a model plant for functional genomics of monocotyledons and usually transformed using Agrobacterium tumefaciens. However, the transformation's process using previous method is still time consuming and uneconomical, low efficiency. In this study, we established a new method by modifying the general Agrobacterium protocol especially in the infection and co-cultivation, Agrobacterium elimination, infected calli's selection steps using liquid media. We directly inoculated Agrobacterium containing a ZjLsL gene under the control of constitutive promoter into the 1- to 3-week-old rice calli derived from mature seeds. After 3 days of co-cultivation, the infected calli were transferred onto liquid media of Agrobacterium elimination and calli's selection for 3 days. The calli were transferred to calli's growth solid media for 14 days and then the calli transferred to shoot induction and root induction media. Putative transformants were initially selected on the medium containing phosphinothricin, and the PAT protein verified by PAT strip test. This method in this study would lead to reduction of substantial labor and time to generate transgenic plants.